Fluidized-bed electrowinning — I. General modes of operation

An analysis is presented of the changes in properties of a fluidized-bed cathode during continued electrowinning use. Control of the particle-size distribution in the bed is achieved by periodic withdrawal of powder equal in weight to the electrowon metal, plus a small fraction of original bed weight. The electrode is restored to its original weight by addition of a suitable quantity of the starting material. The analysis demonstrates that the fluidized electrode approaches a steady-state condition which depends primarily on the detailed schedule under which it is operated, with the initial bed material exerting only a minor influence. Suitable operating schedules are discussed.     

Measurement of attitudes of industrial work groups toward psychology and testing.

Administered 2 Thurstone and 2 Likert scales which measured attitudes toward industrial psychology and testing to 183 male union members, 104 male undergraduates, 187 managers and supervisors, and 211 male and female undergraduates, managers, and laborers (N = 685). Reliabilities of .81 and .84 were obtained for Thurstone scales and .95 and .92 for Likert scales. All scales successfully discriminated among extreme "known groups." Issues dealing with construct validity are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Net energy analyses of four technologies to provide residential space heat

After having calculated energy ratios for four methods of providing residential space heat, passive solar heating systems were found to return approx. 20–25 units of energy for each unit of energy invested. The other technologies (active solar, electrically powered heat pump, and a synthetic gas fueled hot air furnace) had energy ratios of 1.7–5.6. The low energy ratios for active solar energy systems (both air and water) and conventional space heating methods are due to the fact that these technologies employ energy-intensive materials in the equipment used to produce and distribute residential heat. Passive solar energy systems use few components beyond the relatively low energy intensity materials used for standard construction techniques and generally use no energy to distribute the captured heat. Based on these estimates and projected life cycle costs for these energy producing techniques, as well as on some standard energy-conserving techniques, it is apparent that the United States would produce more energy per dollar and energy input with conservation and passive solar strategies than with residential heating techniques depending on coal as a primary fuel.     

Efficient PCR-based gene disruption in Saccharomyces strains using intergenic primers

Gene disruptions are a vital tool for understanding Saccharomyces cerevisiae gene function. An arrayed library of gene disruption strains has been produced by a consortium of yeast laboratories; however their use is limited to a single genetic background. Since the yeast research community works with several different strain backgrounds, disruption libraries in other common laboratory strains are desirable. We have developed simple PCR-based methods that allow transfer of gene disruptions from the S288C-derived strain library into any Saccharomyces strain. One method transfers the unique sequence tags that flank each of the disrupted genes and replaces the kanamycin resistance marker with a recyclable URA3 gene from Kluyveromyces lactis. All gene-specific PCR amplifications for this method are performed using a pre-existing set of primers that are commercially available. We have also extended this PCR technique to develop a second general gene disruption method suitable for any transformable strain of Saccharomyces.     

Effect of drought and irrigation on the fate of nitrogen applied to cut permanent grass swards in lysimeters: Nitrogen balance sheet and the effect of sward destruction and ploughing on nitrogen mineralisation

Fuor years after ¹⁵N labelled fertiliser nitrogen (as Ca(NO₃)₂ and equivalent to 400 kg N ha^?1) was applied to permanent grass swards growing in lysimeter monoliths, approximately one-quarter remained immobilised in soil organic matter. In the intervening years similar but non-labelled applications were made. Although differing rainfall regimes applied during the experiment had significantly affected nitrogen uptake by plants and nitrate loss in drainage, they caused no significant effect on the tracer nitrogen remaining in the soil, the ranges were 85–97 kg N ha^?1 and 79–94 kg N ha^?1 respectively for the 135 cm deep clay and silt loam soil monoliths. Labelled nitrogen unaccounted for in crop, drainage or soil was presumed to have been denitrified. These losses averaged 62 and 49 kg N ha^?1 on the clay and silt loam soils respectively; again the differing rainfall regimes caused no significant differences. The ratio between estimates of labelled nitrogen denitrified and of annual nitroux oxide loss was approximately 9:1 for both soils. The conversion from permanent grass to winter wheat in autumn 1981, involving killing and then burying the sward, resulted in no pronounced increase in net mineralisation of labelled nitrogen. However, the balance between crop uptake and the quantity leached did change. Labelled nitrogen assimilated was less for the wheat (growing without addition of fertiliser nitrogen) than for the grass in its last year, and the quantity leached was considerably greater than under grass swards that were supplied with an average rainfall distribution. Following the first wheat harvest total nitrogen leached averaged 51 and 44 kg N ha^?1 on the clay and silt loam soils respectively. Rates of nitrous oxide emissions during the autumn following sward destruction were greater than in earlier years, but this enhanced loss was of short duration. The crop clearly benefited from the succession of nitrogen applications made to grass, as grain yield and total nitrogen uptake exceeded 7 t ha^?1 and 120 kg N ha^?1 respectively on both soils. These quantities exceed the national averages for winter wheat and are also considerably greater than for crops from lysimeters which received no nitrogen fertiliser throughout the experiment.     

Extraction and characterization of protein fractions from Australian canola meals

Canola proteins were sequentially extracted from four Australian canola meals of different species and two industrial meal samples, according to Osborne method (OSB), based on their solubilities in water, 5% NaCl, 0.1 M NaOH and 70% ethanol respectively. These extracts were then compared to the glutelin fraction obtained by direct alkaline extraction method (DIR) in terms of protein yield, recovery, electrophoretic profile, and residual antinutritional components. The OSB method was found to be more effective for protein extraction which resulted in higher cumulative protein yield and recovery of water-soluble protein fractions, although the DIR method produced a glutelin fraction of higher protein content. Phenolic compounds were observed in all the extracted protein fractions although sinapine, the major phenolic compound in canola, was present only in the albumin fractions. The glucosinolate content of all extracts was below the detection limit of the method employed (< 3 ??mol/g). While the electrophoretic profiles of all four OSB fractions were largely different, the DIR fraction was very similar to the glutelins obtained from the OSB method. Isoelectric focusing revealed that many of the proteins in the canola varieties ranged in pI between pH4.6 and 8.3.     

Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Tobacco particulate matter is more potent than nicotine at upregulating nicotinic receptors on SH-SY5Y cells.

The effect of total particulate matter (TPM) from cigarette smoke on the expression and binding properties of nicotinic acetylcholine receptors (nAChRs) was investigated using a human neuroblastoma cell line (SH-SY5Y). TPM but not nicotine on its own inhibited cell growth at nicotine concentrations above 5 microM. To examine effects on nAChR expression, intact cells were incubated with 3H-epibatidine, and a Bmax of 13 fmoles/10(5) cells (7.8 x 10(4) binding sites/cell) was measured in unexposed cells as well as in cells treated with 2 microM nicotine alone or with TPM containing 2 microM nicotine. Using Scatchard analysis, we measured a Kd of 0.3 nM for 3H-epibatidine binding to nAChRs. This Kd was increased to 1.3 nM by addition of nicotine or TPM extract, both at 2 microM nicotine. Bmax, however, was unaffected, suggesting competitive binding of nicotine to its receptor. Short-term and prolonged 3-day exposures of SH-SY5Y cells to either TPM or nicotine at nicotine concentrations ranging from 0.2 microM to 20 microM increased specific binding, suggesting upregulation of nAChR expression. Most significant, binding was consistently greater in cells pretreated with TPM than in cells pretreated with nicotine. We conclude that TPM contains compounds that are toxic to cells at high concentrations (cell growth inhibition) but that do not compete with nicotine for binding to nAChRs (Scatchard analysis). These non-nicotinic compounds are capable of increasing the expression of one or more of the nAChR subunits. Furthermore, our cell culture assay provides a useful in vitro model for assessing the relative addictiveness of different tobacco products, including that of non-nicotine components.     

Applicability of Pressurized Liquid Extraction for Melamine Analysis in Pet Foods with High-Performance Liquid Chromatography with Diode Array Detection

A pressurized liquid extraction (PLE) method was developed for melamine analysis in pet foods. The PLE method which utilized an accelerated solvent extraction (ASE®) system was also compared with sonication and polytron extraction methods. The parameters for the optimized PLE method were temperature (75?°C for wet pet food, 125?°C for dry pet food), pressure (1,500 psi), static time (10 min), flush volume (40%), purge time (1 min), and number of cycles (1). Recoveries obtained by PLE method were significantly higher (P?≤?0.05) than those of sonication and polytron methods for dry pet food samples. For the analysis of adulterated pet foods, PLE resulted in the highest melamine content followed by sonication and polytron. Using PLE, samples fortified with melamine at 2.5 and 100 mg kg^?1 resulted in recoveries ranging from 55% to 90% for wet samples and from 90% to 116% for dry samples. Low recovery rate from wet samples at low spike level (2.5 mg kg^?1) may have been caused by co-aggregation of polysaccharide and protein with melamine due to low pH during solid-phase extraction cleanup. Limit of detection and limit of quantification values were 0.5 (mg kg^?1) and 1.0 (mg kg^?1) for dry samples. Overall, PLE had the best extraction efficiency compared to sonication and polytron, proving PLE to be a useful tool for melamine analysis of pet foods.