Salmonella in uncooked retail meats in New Zealand

A national quantitative survey of Salmonella in five types of uncooked retail meats in New Zealand was undertaken from August 2003 to May 2005 to establish baseline proportionality data. The overall prevalence of Salmonella in 1,108 meat samples was 1.1% (95% confidence interval, 0.6 to 1.9). Low prevalences of Salmonella in each meat type were observed, with 3% (1.2 to 6.1) in chicken, 1.3% (0.3 to 3.8) in lamb and mutton, 0.5% (0 to 3.0) in unweaned veal, 0.4% (0 to 2.4) in beef, and 0% (0 to 1.6) in pork. The Salmonella serotypes isolated were Salmonella Infantis from beef; Salmonella Typhimurium PT1 from unweaned veal and chicken; Salmonella sp. 6,7:k:-, Salmonella Enteritidis PT9a, Salmonella sp. 4,5,12:-:-, Salmonella sp. 4,12:-:-, and Salmonella Typhimurium PT160 from chicken; and Salmonella sp. 4:-:2 and Salmonella Brandenburg from lamb. Four of the isolates from chicken, Salmonella sp. 4,5,12:-:- (two isolates), Salmonella sp. 4,12:-:-, and Salmonella Typhimurium PT1, were very similar phenotypically and serologically to the attenuated Salmonella vaccine strain used in MeganVacl for poultry. One lamb sample yielded a count of Salmonella Brandenburg of 4.24 most probable number (MPN)/g, while all other positive samples were <1.0 MPN/g. The results provide baseline proportionality data for Salmonella in retail uncooked meats that will contribute invaluably toward future risk assessment in light of other information, such as consumption data that can be used for risk characterization.     

Electrostatic Adsorption of a Colloidal Sintering Agent on Silicon Nitride Particles

Pressureless sintering of silicon nitride requires addition of sintering agents. The main part of this study was done in order to homogenize the distribution of sintering agents, in this case Y₂O₃, in a silicon nitride matrix. Colloidal 10-nm Y₂O₃ Particles were electrostatically adsorbed on Si₃N₄ particle surfaces. The adsorption was studied by X-ray fluorescence analysis and electrophoretic measurements. Addition of Y₂O₃ sol to a Si₃N₄ suspension decreased the viscosity of the suspension. The slip casting properties of Si₃N₄ suspensions with added Y₂O₃ sol were examined, and the homogeneity of Y₂O₃ in the green compacts was compared with conventionally prepared samples. An improved microstructural homogeneity was obtained when Y₂O₃ sol particles were adsorbed on the Si₃N₄ particle surfaces.     

Fatty acid composition of fats of differing melting points extracted from ram subcutaneous tissue

The observation that the subcutaneous fat of pasture-fed Southdown rams consists of two distinct regions is reported. Fatty acid composition of fat from the outer and inner regions of subcutaneous tissue taken from the rib region of eight Southdown rams fed pasture were determined. Relative to the harder inner regions (mean melting point 43.1°C), the softer outer regions (mean melting point 31.8°C) were shown to contain more 9∶0-, 15∶0-, 17∶0-, 17∶1-, 18∶1-cis and total 18∶1 fatty acids; less 14∶0-, 16∶0-, 18∶0- and 18∶1-trans fatty acids; and a greater variety and a greater concentration of branched-chain components. Proportions of medium chain-length fatty acids other than 9∶0, did not differ between the layers. The fatty acid contents of serial samples taken at 1-mm intervals through these tissues were determined. Changes in concentrations of components among samples were gradual through the tissues. There was no clear connective tissue sheet, as has been reported for pigs. The inner region of the tissues contains apparently nonrandom fluctuating changes in fatty acid composition.     

The source of degradation during extrusion of polystyrene

The nature and magnitude of mechanical reactions of polystyrene in capillary flow has been examined in a model extrusion process. Studies on polystyrene quantify the sensitive increase in shear degradation tendency with increasing polymer molecular weight. A molecular weight spectrum caused by the shear stress profile was measured across the extrudate radius by the new technique of solvent coring. It was further determined that an appreciable fraction of the mechanical reaction is shear induced in the capillary reservoir. This is confirmed by precision determinations of molecular weights and distributions by gel permeation chromatography on samples taken from concentric layers in the capillary reservoir after 50% sample extrusion. These results, involving traces of oxygen as a chemical probe, describe the stress profile in the reservoir and in the capillary during the pressure extrusion of high molecular weight polystyrene. Thus, changes in molecular weight and distribution may be attributable to changes in different portions of the shear geometry rather than the uniform changes generally considered. Clear evidence is also presented showing the dramatic effects of oxygen on these shear-induced changes in molecular weight and distribution.     

Preparation of semirigid polyurethane foam with liquefied bamboo residues

Bamboo residues were liquefied by using a solvent mixture consisting of polyethylene glycol 400 and crude glycerol (4/1, w/w) with 98% sulfuric acid as catalyst at 160°C for 120 min. The liquefied bamboo had hydroxyl values from 178 to 200 mg KOH/g and viscosities from 507 to 2201 mPa S. The obtained bamboo‐based polyols were reacted with various amounts of polyaryl polymethylene isocyanate (PAPI), using distilled water as blowing agent, silicone as surfactant, and triethylenediamine and dibutyltine dilaurate as cocatalyst to produce semirigid polyurethane (PU) foams. The [NCO]/[OH] ratio was found to be an important factor to control the mechanical properties of PU foams. At a fixed [NCO]/[OH] ratio, both density and compressive strength of PU foams decreased with the increase of bamboo content. The microstructure of PU foams indicates that [NCO]/[OH] ratios are important for cell formation and chemical reactions. The uniformity and cell structure of the foams are comparable to their corresponding compressive strengths. Moreover, the thermogravimetry analysis showed that all the semirigid PU foams had approximately the same degradation temperature of about 250 to 440°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Molecular Interactions of Tannic Acid with Proteins Associated with SARS-CoV-2 Infectivity

The overall impact of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on our society is unprecedented. The identification of small natural ligands that could prevent the entry and/or replication of the coronavirus remains a pertinent approach to fight the coronavirus disease (COVID-19) pandemic. Previously, we showed that the phenolic compounds corilagin and 1,3,6-tri-O-galloyl-β-D-glucose (TGG) inhibit the interaction between the SARS-CoV-2 spike protein receptor binding domain (RBD) and angiotensin-converting enzyme 2 (ACE2), the SARS-CoV-2 target receptor on the cell membrane of the host organism. Building on these promising results, we now assess the effects of these phenolic ligands on two other crucial targets involved in SARS-CoV-2 cell entry and replication, respectively: transmembrane protease serine 2 (TMPRSS2) and 3-chymotrypsin like protease (3CLpro) inhibitors. Since corilagin, TGG, and tannic acid (TA) share many physicochemical and structural properties, we investigate the binding of TA to these targets. In this work, a combination of experimental methods (biochemical inhibition assays, surface plasmon resonance, and quartz crystal microbalance with dissipation monitoring) confirms the potential role of TA in the prevention of SARS-CoV-2 infectivity through the inhibition of extracellular RBD/ACE2 interactions and TMPRSS2 and 3CLpro activity. Moreover, molecular docking prediction followed by dynamic simulation and molecular mechanics Poisson–Boltzmann surface area (MMPBSA) free energy calculation also shows that TA binds to RBD, TMPRSS2, and 3CLpro with higher affinities than TGG and corilagin. Overall, these results suggest that naturally occurring TA is a promising candidate to prevent and inhibit the infectivity of SARS-CoV-2.     

Generating short‐term probabilistic wind power scenarios via nonparametric forecast error density estimators

Forecasts of available wind power are critical in key electric power systems operations planning problems, including economic dispatch and unit commitment. Such forecasts are necessarily uncertain, limiting the reliability and cost‐effectiveness of operations planning models based on a single deterministic or “point” forecast. A common approach to address this limitation involves the use of a number of probabilistic scenarios, each specifying a possible trajectory of wind power production, with associated probability. We present and analyze a novel method for generating probabilistic wind power scenarios, leveraging available historical information in the form of forecasted and corresponding observed wind power time series. We estimate nonparametric forecast error densities, specifically using epi‐spline basis functions, allowing us to capture the skewed and nonparametric nature of error densities observed in real‐world data. We then describe a method to generate probabilistic scenarios from these basis functions that allows users to control for the degree to which extreme errors are captured. We compare the performance of our approach to the current state‐of‐the‐art considering publicly available data associated with the Bonneville Power Administration, analyzing aggregate production of a number of wind farms over a large geographic region. Finally, we discuss the advantages of our approach in the context of specific power systems operations planning problems: stochastic unit commitment and economic dispatch. Our methodology is embodied in the joint Sandia–University of California Davis Prescient software package for assessing and analyzing stochastic operations strategies.     

An actively controlled fuel cell/battery hybrid to meet pulsed power demands

This paper presents the experimental results of an actively controlled fuel cell/battery hybrid power source topology that can be widely used in many applications, such as portable electronic devices, communication equipment, spacecraft power systems, and electric vehicles, in which the power demand is impulsive rather than constant. A step-down DC/DC power converter is incorporated to actively control the power flow between the fuel cell and the battery to achieve both high power and high energy densities. The results show that the hybrid power source can achieve much greater specific power and power density than the fuel cell alone. This paper first demonstrates that an actively controlled hybrid with a 35 W hydrogen-fueled polymer electrolyte membrane fuel cell and a lithium-ion battery pack of six cells yielded a peak power of 100 W, about three times as high as the fuel cell alone can supply, while causing a very limited (10%) weight increase to the whole system. After that, another hybrid source using a different battery array (eight cells) was investigated to further validate the control strategy and to show the flexibility and generality of the hybrid source design. The experimental data show that the hybrid source using an eight-cell battery supplied a peak power of 135 W, about four times that of the fuel cell alone. Finally, three power sources including the fuel cell alone and the two hybrids studied were compared in terms of specific power, power density, volume, weight, etc. The design presented here can be scaled to larger or smaller power capacities for a variety of applications.     

21世纪初ICRP建议书草案

在过去的几年中，国际放射防护委员会鼓励对其计划将于2005年发表的下一个建议书表述辐射防护理念的最佳方式开展讨论。现在的建议书是由1990年发表的第60号出版物提出的，而且得到过去12年里发表的其它出版物的补充。现在显然委员会有必要总结在大约10个报告中推荐的数值数量的完整性。本文将完成这项工作，并由此而表明前进方向，提出一个简明且比较一致的21世纪初防护理念的表述。当然并不意在进行根本的修改，而是建议对现行政策做出连贯一致的表述，对其应用进行简化。