Two‐Microphone Binary Mask Speech Enhancement in Diffuse and Directional Noise Fields

Two‐microphone binary mask speech enhancement (2mBMSE) has been of particular interest in recent literature and has shown promising results. Current 2mBMSE systems rely on spatial cues of speech and noise sources. Although these cues are helpful for directional noise sources, they lose their efficiency in diffuse noise fields. We propose a new system that is effective in both directional and diffuse noise conditions. The system exploits two features. The first determines whether a given time–frequency (T‐F) unit of the input spectrum is dominated by a diffuse or directional source. A diffuse signal is certainly a noise signal, but a directional signal could correspond to a noise or speech source. The second feature discriminates between T‐F units dominated by speech or directional noise signals. Speech enhancement is performed using a binary mask, calculated based on the proposed features. In both directional and diffuse noise fields, the proposed system segregates speech T‐F units with hit rates above 85%. It outperforms previous solutions in terms of signal‐to‐noise ratio and perceptual evaluation of speech quality improvement, especially in diffuse noise conditions.     

Stability analysis of whirling composite shells partially filled with two liquid phases

In this paper, the stability of whirling composite cylindrical shells partially filled with two liquid phases is studied. Using the first-order shear shell theory, the structural dynamics of the shell is modeled and based on the Navier-Stokes equations for ideal liquid, a 2D model is developed for liquid motion at each section of the cylinder. In steady state condition, liquids are supposed to locate according to mass density. In this study, the thick shells are investigated. Using boundary conditions between liquids, the model of coupled fluid-structure system is obtained. This coupled fluid-structure model is employed to determine the critical speed of the system. The effects of the main variables on the stability of the shell are studied and the results are investigated.     

Separation of trace amounts of palladium from water and wastewater samples using MPTMS-SBA-15 mesoporous silica sorbents

This study describes the application of functionalized Santa Barbara Amorphous mesoporous silica as an easily prepared and stable solid sorbent for the separation of trace amounts of palladium (Pd) ions in aqueous solutions. The mesoporous silica was functionalized by 3-mercaptopropyltrimetoxysilane, and its application as solid sorbents for the preconcentration of Pd ion was studied. Different experimental conditions such as pH, type and concentration of eluent solution were optimized. The in?uence of various interferences ions on the recovery of Pd(II) was investigated. In the optimized condition, the recovery was greater than 98.3%. The maximum adsorption capacity was obtained 146.2 mg g^?1 for the modified sorbent. The proposed procedure was applied for the separation and preconcentration of Pd in water and wastewater samples.     

Experimental characterization of fracture of glass fiber reinforced composites laminates subjected to freeze‐thaw cycles

The simultaneous effect of moisture and freeze‐thaw cycle on the mechanical behavior of glass/epoxy composites laminates is experimentally investigated. The study is planned in order to simulate the detrimental presence of humidity due to rainfall in surface damage of composite structures operating in cold weather. Different mechanisms governing the monotonic response of specimens subjected to freeze‐thaw cycles are pointed out by taking advantages of SEM images. Comparing SEM images taken from dry and wet specimens shows that the failure mechanisms such as matrix cracking and delamination are vastly activated around the notched region when the material is exposed to humidity and freeze‐thaw cycle. The load‐displacement response of examined specimens, namely the linear response, is remarkably altered under these conditions. A reduction of approximately 40% in ultimate load and 30% in slope of tangent line of load‐displacement curves is identified after 100 cycles of freeze‐thaw as well as more than 20% decrease of strain energy release rate.     

First-principles insight into two-dimensional palladium phosphide tellurium (PdPTe) monolayer as a promising scavenger for detecting SF6 decompositions

Journal of Materials Science - Recently, the monitoring of SF6 decomposition components has allured notable attention. SF6 decomposition products are toxic and corrosive, which will greatly reduce...     

Modeling the constant amplitude fatigue behavior of adhesively bonded pultruded GFRP joints

The constant amplitude fatigue behavior of adhesively bonded pultruded glass fiber reinforced polymer double-lap joints were modeled by a number of conceptually different phenomenological S–N (cyclic stress vs. number of cycle) formulations. An extended database containing constant amplitude fatigue data under tension (R?=?0.1), compression (R?=?10), and reversed loading (R?=??1) were analyzed in order to investigate whether or not there exists an appropriate fatigue formulation for accurate modeling of the behavior of the examined joints throughout their lifetime, from the very low-cycle fatigue to the high-cycle fatigue regions. Based on an extensive review, appropriate fatigue formulations that take into account the probabilistic nature of lifetime measurements were selected and their fundamental assumptions were examined. The validity of the statistical assumptions of these models was found to be influenced by the applied loading conditions. The modeling results were similar for all selected fatigue formulations with the derived S–N curves exhibiting differences mainly in the low- and high-cycle fatigue regimes. The formulations insensitive to the scatter in the experimental data were found to be the most appropriate models.