Middleware and Metrology for the Pervasive Future

Looks at the data and metrology tools developed by The National Institute of Standards and Technology for the research community, including common middleware for distributed sensor data acquisition and processing.     

Ultrahigh molecular weight polyethylene as used in articular prostheses (a molecular weight distribution study)

Currently there is widespread use of ultrahigh molecular weight polyethylene (UHMWPE) acetabular components in total joint replacement prostheses. What has been most surprising about the wear of UHMWPE under such circumstances is the occurrence of brittle fracture. Such fracture had not been observed in the usual engineering tests done in the laboratory on UHMWPE. It was only when prosthese which had been removed from patients were examined or run in hip joint simulators with serum or synovial fluid as the lubricant, that brittle fracture was encountered. The problem of environment-enhanced brittle fracture in plastics dates back to 1946. Interestingly, the phenomenon was first described in polyethylene. The prime variables involved are polymer molecular weight, sensitizing environment, stress filed, and temperature. Other things being equal, brittle behavior in polyethylene is extremely sensitive to the amount of low molecular weight polymer present. In the light of the foregoing we have studied the molecular weight distribution in six commercially available UHMWPE components. These were obtained from six different manufacturers. The specimens were characterized both on their bearing (wear) surfaces and in their interior bulk. The results obtained indicate that:

• 1 The UHMWPE components contain substantial amounts of low molecular weight polymer.
• 2 The UHMWPE components differ significantly in molecular weight distribution.
• 3 The UHMWPE components contain substantial amounts of crosslinked polymer.

     

Hydrolysis of fish oils containing polymers of triacylglycerols by pancreatic lipasein vitro

Fish oils containing different levels of polymers of triacylglycerols formed during autoxidation were incubated with pancreatic lipase to establish whether these polymers are substrates for lipase hydrolysis. With oils containing low amounts (less than 4%) of triacylglycerol polymers as substrates, both triacylglycerols and polymers of triacylglycerols were almost completely hydrolyzed, and fatty acid monomers and monoacylglycerols were the major lipid products. Under the same incubation conditions, some triacylglycerols remained intact when highly oxidized oils containing 20 or 30% triacylglycerol polymers were the substrate. The fatty acid composition of these residual triacylglycerols was almost identical to that of triacylglycerols present at the start of the assay. When fish oil containing 30% triacylglycerol polymers was incubated with the lipase, the component triacylglycerols and polymers of triacylglycerols were hydrolyzed at similar rates, and fatty acid dimers were detected as a product. It is concluded that the high molecular weight polymers of triacylglycerols present in oxidized fish oils can be hydrolyzed by pancreatic lipasein vitro.     

Emission of Volatile Organic Compounds After Herbivory from <Emphasis Type="Italic">Trifolium pratense</Emphasis> (L.) Under Laboratory and Field Conditions

Plants emit a wide range of volatile organic compounds in response to damage by herbivores, and many of the compounds have been shown to attract the natural enemies of insect herbivores or serve for inter- and intra-plant communication. Most studies have focused on volatile emission in the laboratory while little is known about emission patterns in the field. We studied the emission of volatiles by Trifolium pratense (red clover) under both laboratory and field conditions. The emission of 24 compounds was quantified in the laboratory, of which eight showed increased emission rates after herbivory by Spodoptera littoralis caterpillars, including (E)-β-ocimene, the most abundant compound, (Z)-β-ocimene, linalool, (E)-β-caryophyllene, (E,E)-α-farnesene, 4,8-dimethyl-1,3,7-nonatriene (DMNT), 1-octen-3-ol, and methyl salicylate (MeSA). While most of these compounds have been reported as herbivore-induced volatiles from a wide range of plant taxa, 1-octen-3-ol seems to be a characteristic volatile of legumes. In the field, T. pratense plants with varying herbivore damage growing in established grassland communities emitted only 13 detectable compounds, and the correlation between herbivore damage and volatile release was more variable than in the laboratory. For example, the emission of (E)-β-ocimene, (Z)-β-ocimene, and DMNT actually declined with damage, while decanal exhibited increased emission with increasing herbivory. Elevated light and temperature increased the emission of many compounds, but the differences in light and temperature conditions between the laboratory and the field could not account for the differences in emission profiles. Our results indicate that the release of volatiles from T. pratense plants in the field is likely to be influenced by additional biotic and abiotic factors not measured in this study. The elucidation of these factors may be important in understanding the physiological and ecological functions of volatiles in plants.     

Detection of staphylococcal enterotoxins in dairy products by the reversed passive latex agglutination (SET-RPLA) kit

The SET-RPLA is a commercially available kit for the detection of staphyloccal enterotoxins in foods. Previous reports have shown that non-specific reactions occur on use of the kit with cheeses and thereby restrict its use. In this study a variety of dairy products were tested and non-specific reactions were found to be associated with those products rennetted during manufacture. These reactions can be obviated by addition of 10 mM sodium hexametaphosphate to the diluent provided in the kit, without affecting the ability to detect staphyloccal enterotoxins in dairy products. The sensitivity of the SET-RPLA was demonstrated to be 0.25 ng/ml.     

Polybrominated diphenylethers (PBDEs) and brominated dioxins (PBDD/Fs) in Irish food of animal origin

Brominated dioxins (PBDD/Fs) and 17 polybrominated diphenylether (PBDE) congeners including BDE-209 were analysed in 100 composite samples of commonly consumed foods of animal origin, prepared from ten to 40 individual subsamples of each type. These included 30 samples of milk from farms; eggs from chickens; fat from cows, pigs, sheep, and poultry; and liver from cows, pigs, sheep, horses, and poultry. The ISO 17025-accredited analytical methodology used, follows similar guidelines as given for chlorinated dioxins and polychlorinated biphenyls (PCBs) in European Commission Directive 2002/69/EC. Apart from some samples of milk, PBDD/Fs and PBDEs were detected in all food types. Concentrations ranged from 0.31 µg kg^?1 Σ17 PBDEs for a sample of milk to 37.5 µg kg^?1 Σ17 PBDEs for a sample of liver. The corresponding range for the PBDD/F toxicity (computed using analogous PCDD/F toxic equivalency factors (TEFs)) was 0.09 ng TEQ kg^?1 to approximately 3.5 ng TEQ kg^?1. The detection of these compounds, in particular PBDD/Fs, is consistent with the increased use and disposal of brominated organic compounds.     

A customised approach to determining the geomorphic effectiveness of small flood events in a regulated river

The construction of dams significantly alters flow and sediment regimes with subsequent deleterious effects on the morphological and ecological character of rivers. Effective experimental floods can ameliorate the downstream geomorphic impacts of dams. The traditional view is that large floods are required to perform effective geomorphic work, and the geomorphic outcomes of small floods are often overlooked. Many river restoration frameworks do not consider small floods. Yet, there is evidence that the hydrological characteristics that ameliorate specific geomorphic impacts in a river are unique to each river, and a customised approach to setting the right mix of floods (including small experimental floods) is needed. In this study, we modify an existing flood effectiveness model developed for large floods, for determining the geomorphic effectiveness of small floods in a highly regulated Australian river. Two flood classes were added to the model (medium peak stream power and moderate total energy expenditure), and the flood power characteristics were rescaled to reflect the relative difference in the magnitude of the small floods and the magnitude of the geomorphic work performed. Using a step‐wise approach, this customised model determined the geomorphic effectiveness of small floods. The best flood for ameliorating the geomorphic impacts of flow regulation had medium to long duration (10 to 51 days), high peak unit stream power (77 to 123 Wm^?2) and moderate to large total energy expenditure (78,600 to 342,320 × 10³ J). This approach to determining flood effectiveness for small floods is applicable to other geomorphically impacted river channels downstream of dams and can be used to inform experimental flood releases for geomorphic outcomes.     

产品设计对改进产品生命终期的影响

本研究的主要目标是在鼓励创造性思维的同时，建立一个结构化方法用于阐明产品生命周期策略。当前提倡采用适用于大多数产品的通用规则。联系“通用性”原则，与“放之四海皆准”的方法相比，本研究找出了影响产品生命终期的主要因素。研究结果可分为两个核心部分。第一，根据产品的技术特性，该方法论确定了合理的产品生命终期策略第二，为了评估和验证该方法，将产品生命终期策略的分类和当前工业实践进行了对比，开发的产品生命终期设计顾问(ELDA)软件，指导生产商确定适合的产品生命终期策略。对产品生命终期进行分类的能力使得设计者能够重新设计对环境负荷较小产品。这篇文章为设计者和生产管理者提供了合适的产品生命终期策略。通过更深入的理解相应产品的生命终期策略，本文的研究结果能够帮助设计者开发适合他们情况的、系统的产品生命终期策略。通过技术革新或者价值链的改进，将ELDA的结果运用于生命终期改善。     

Managerial Competences for ERP Journeys

This paper investigates the managerial competences required for the complex interactions required to successfully integrate an Enterprise Resource Planning system into an organization—the ERP journey. A feature of the study (a five year longitudinal study of a Danish production company implementing SAP R/3) was the rise and fall of the ERP project managers. The study showed that different stages of the ERP journey required different competences from the managers. A manager with a certain competence mix might successfully oversee part of the ERP journey, but a different blend of competences was required to manage other parts. The paper concludes that a wide range of competences are required: personal, business and technical. The competence mix should be expected to vary through the journey, and is often too much to expect of one person.     

Platten-Modellversuche zur Erklärung des Entstehens von Eigenspannungen beim Schweißen

Ermittlung von Temperaturverteilung, Abkühlungsverlauf, Gefüge, Härte und Eigenspannungen bei mittig erwärmten Stahlplatten aus St 37-3 und StE 70. Einfluß des Umwandlungsverhaltens auf die Eigenspannungen. Deutung der Eigenspannungsentstehung beim Zusammenwirken von Wärme- und Umwandlungsspannungen.