Computer Evaluation of Overhead Equipment for Electric Railroad Traction

The mathematical models and associated computer programs for analyzing a number of designs of overhead equipment such as simple catenary, compound catenary, stitched catenary, tunel equipment, and single-wire system, together with many possible variations are described. The programs are able to deal with up to four pantographs, and the initial conditions assumed are that the wires have their static equilibrium configurations and that the front pantograph is at the beginning of the first span touching the contact wire (or trolley wire) and moving tangentially to it. Any subsequent pantographs reach the beginning of the equipment after the start of the run and are then dealt with appropriately. The output of the programs list the input data, the total percentage contact loss between the panhead and contact wire in each span and the pantograph heights and contact forces at appropriate intervals of time. Graph plots of the pantograph heights and contact forces are also produced. The results of these programs are shown to give satisfactory agreement with previously published results obtained on a scaled model.     

Studies of the biogenic amine transporters. IV. Demonstration of a multiplicity of binding sites in rat caudate membranes for the cocaine analog [125I]RTI-55

The drug 3 beta-[4'-iodophenyl]tropan-2 beta-carboxylic acid methyl ester (RTI-55) is a cocaine congener with high affinity for the dopamine transporter (Kd < 1 nM). The present study characterized [125I]RTI-55 binding to membranes prepared from rat, monkey and human caudates and COS cells transiently expressing the cloned rat dopamine (DA) transporter. Using the method of binding surface analysis, two binding sites were resolved in rat caudate: a high-capacity binding site (site 1, Bmax = 11,900 fmol/mg of protein) and a low-capacity site (site 2, Bmax = 846 fmol/mg of protein). The Kd (or Ki) values of selected drugs at the two sites were as follows: (Ki for high-capacity site and Ki for low-capacity site, respectively): RTI-55 (0.76 and 0.21 nM), 1-[2-diphenyl-methoxy)ethyl]-4-(3-phenylpropyl)piperazine (0.79 and 358 nM), mazindol (37.6 and 631 nM), 2 beta-carbomethoxy-3 beta-(4-fluorophenyl)tropane (45.0 and 540 nM) and cocaine (341 and 129 nM). Nisoxetine, a selective noradrenergic uptake blocker, had low affinity for both sites. Serotonergic uptake blockers had a high degree of selectivity and high affinity for the low-capacity binding site (Ki of citalopram = 0.38 nM; Ki of paroxetine = 0.033 nM). The i.c.v. administration of 5,7-dihydroxytryptamine to rats pretreated with nomifensine (to protect dopaminergic and noradrenergic nerve terminals) selectively decreased the Bmax of site 2, strongly supporting the idea that site 2 is a binding site on the serotonin (5-HT) transporter. This serotonergic lesion also increased the affinity of [125I]RTI-55 for the DA transporter by 10-fold. The ligand selectivity of the caudate 5-HT transporter was different from the [I125]RTI-55 binding site on the 5-HT transporter present in membranes prepared from whole rat brain minus caudate. The [125I]RTI-55 binding to the DA transporter was further resolved into two components, termed sites 1a and 1b, by using human and monkey (Macaca mulatta) caudate membranes but not the membranes prepared from rat caudate or COS cells that transiently expressed the cloned cocaine-sensitive DA transporter complementary DNA. Similar experiments also resolved two components of the caudate 5-HT transporter. Viewed collectively, these data provide evidence that [125I]RTI-55 labels multiple binding sites associated with the DA and 5-HT transporters.     

An environmental sample chamber for X-ray microscopy

The manufacture, construction and performance of a special specimen holder for biological samples suspended in aqueous solution is described. The holder was designed for use in a scanning transmission X-ray microscope. Using it, we have successfully obtained high-resolution images of fresh cellular and subcellular specimens in suspension and have been able to vary the sample environment during viewing in the microscope.     

Low-Frequency Noise Characteristics of HgCdTe Infrared Photodiodes Operating at High Temperatures

We present experimental results of 1/f noise characterization in n ⁺/p mercury-vacancy-doped photodiodes. The 1/f noise was measured as a function of temperature and diode bias voltage for different photodiode configurations. We have investigated the 1/f noise of devices with various geometries and structures, in different spectral bands, and produced using different growth processes. Contrasting 1/f noise behavior was observed in mid-wavelength infrared range (MWIR) and long-wavelength infrared range (LWIR) devices. The results indicate that the 1/f noise in MWIR photodiodes is proportional to the diode area, which implies the presence of a previously unreported noise-generating mechanism occurring in bulk material. The 1/f noise in the LWIR photodiodes was found to be independent of diode geometry, indicating the presence of a diffusion current modulation at specific points of the junction.     

Impulse Response Time Measurements in Hg<Subscript>0.7</Subscript>Cd<Subscript>0.3</Subscript>Te MWIR Avalanche Photodiodes

The response time of front-sided illuminated n-on-p Hg_0.7Cd_0.3Te electron avalanche photodiodes (e-APDs) at T = 77 K was studied using impulse response measurements at λ = 1.55 μm. We measured typical rise and fall times of 50 ps and 800 ps, respectively, at gains of M ≈ 100, and a record gain-bandwidth (GBW) product of GBW = 1.1 THz at M = 2800. Experiments as a function of the collection width have shown that the fall time is strongly limited by diffusion. Variable-gain measurements showed that the impulse response is first-order sensitive to the level of the output amplitude. Only a slight increase in the rise time and the fall time was observed with the gain at constant output amplitude, which is consistent with a strongly dominant electron multiplication. Comparisons of the experimental results with Silvaco finite element simulations confirmed the diffusion limitation of the response time and allowed the illustration of the transit time and RC effects.     

History-Dependent Impact Ionization Theory Applied to HgCdTe e-APDs

The variation of the gain and the excess noise factor in HgCdTe avalanche photodiodes (APDs) with different junction geometries are compared with published theoretical and numerical work. It is shown that, although some features of the gain curves are reproduced, such as the constant exponential increase in the gain, the theoretical work fails to predict the observed variation of the gain as a function of multiplication layer width. In contrast, a new analytical gain model based on local impact ionization coefficients and a first direct comparison of the prediction of history-dependent impact ionization theory are shown to give a good general fit to the experimental gain data. A generic model of the gain in HgCdTe APDs has been obtained by fitting the analytical local model to gain curves of APDs with various geometries and cut-off wavelengths. The study of different hypotheses on the electric field dependence of the dead-space length and the saturation value of the impact ionization coefficient has shown that a variable dead-space effect has a direct impact on the excess noise of APDs, which is why exact excess noise measurements are necessary to achieve a pertinent estimation of the nonlocal impact ionization function.     

Experimental Performance and Monte Carlo Modeling of Long Wavelength Infrared Mercury Cadmium Telluride Avalanche Photodiodes

We evaluated the performance of long-wavelength infrared (LWIR, λ _c = 9.0 μm at 80 K) mercury cadmium telluride electron-injected avalanche photodiodes (e-APDs) in terms of gain, excess noise factor, and dark current, and also spectral and spatial response at zero bias. We found an exponential gain curve up to 23 at 100 K and a low excess noise factor close to unity (F = 1–1.25). These properties are indicative of a single carrier multiplication process, which is electron impact ionization. The dark current is prevailed by a diffusion current at low reverse bias. However, tunneling currents at higher reverse bias limited the usable gain. The measurements of the pixel spatial response showed that the collection width, and, especially, the amplitude of the response peak, increased with temperature. Furthermore, we developed a Monte Carlo model to understand the multiplication process in HgCdTe APDs. The first simulation results corroborated experimental measurements of gain and excess noise factor in mid-wavelength infrared (MWIR, x = 0.3) and LWIR (x = 0.235) e-APDs at 80 K. This model makes it possible for phenomenological studies to be performed to identify the main physical effects and technological parameters that influence the gain and excess noise. The study of the effect of the n ⁻-layer thickness on APD performance demonstrated the existence of an optimum value in terms of gain.     

Stimulation of bile acid synthesis by dibutyryl cyclic AMP in isolated rat hepatocytes

Freshly isolated rat hepatocytes were used to examine the effects of dibutyryl cyclic AMP on the incorporation of¹⁴C-acetate and¹⁴C-cholesterol into bile acids. After an initial lag period, both precursors were incorporated into cholic and chenodeoxycholic acids at a linear rate for the subsequent 60 min. An apparent stimulation of bile acid formation from¹⁴C-acetate by dibutyryl cyclic AMP was complicated by the concomitant inhibition of cholesterol synthesis. In experiments with¹⁴C-cholesterol, dibutyryl cyclic AMP (1 mM) increased the labeled cholic and chenodeoxycholic acids in the medium by 83 and 224%, respectively, but cellular levels of labeled bile acids were unchanged. As a result, the nucleotide stimulated the overall incorporation of¹⁴C-cholesterol into cholic acid by 39% and into chenodeoxycholic acid by 123%. The mean ratio of labeled cholic to chenodeoxycholic acid declined from 55∶45 in control cells to 41∶59 in cells incubated with dibutyryl cyclic AMP. The results demonstrate that label incorporation can be used to study the regulation of bile acid synthesis in isolated hepatocytes. We propose that dibutyryl cyclic AMP enhances bile acid production by phosphorylating, and thus stimulating the activity of, cholesterol 7α-hydroxylase, the rate-limiting enzyme in bile acid synthesis.     

Intimate Partner Abuse Perpetrated by Employees.

This exploratory study examined partner abuse perpetration in the context of employment. Qualitative and quantitative data from 29 men convicted of partner abuse were gathered through focus groups and a brief survey. Men attributed absences, reduced productivity, and errors to their perpetration of abuse and described harassing their victims using employers' phones, vehicles, e-mails and by enlisting coworkers. Findings also suggest that zero-tolerance policies may be ineffective and that employers may benefit from partner abuse training. For example, participants reported that their employers offered them alcohol-abuse services instead of batterer intervention, despite the fact that substance abuse was not a factor in all of the cases. These findings need to be tested through a larger scale, empirical investigation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)