Discovery of the Tiancilactone Antibiotics by Genome Mining of Atypical Bacterial Type II Diterpene Synthases

Although genome mining has advanced the identification, discovery, and study of microbial natural products, the discovery of bacterial diterpenoids continues to lag behind. Herein, we report the identification of 66 putative producers of novel bacterial diterpenoids, and the discovery of the tiancilactone (TNL) family of antibiotics, by genome mining of type II diterpene synthases that do not possess the canonical DXDD motif. The TNLs, which are broad‐spectrum antibiotics with moderate activities, are produced by both Streptomyces sp. CB03234 and Streptomyces sp. CB03238 and feature a highly functionalized diterpenoid skeleton that is further decorated with chloroanthranilate and γ‐butyrolactone moieties. Genetic manipulation of the tnl gene cluster resulted in TNL congeners, which provided insights into their biosynthesis and structure–activity relationships. This work highlights the biosynthetic potential that bacteria possess to produce diterpenoids and should inspire continued efforts to discover terpenoid natural products from bacteria.     

Solubility of Natural Gas in Diesel Fuel

The solubility of commercially available natural gas in commercially available diesel fuel at room temperature and defined pressure is investigated experimentally. The gas phase is considered to be pure methane. The use of Henry's law to model the solubility is discussed. Solubility is given in terms of the mole fraction and the volumetric mass concentration of dissolved gas and the corresponding Henry's coefficients. The solubility is compared to that of pure methane in pure hexadecane, which is similar to diesel fuel with respect to the mean carbon number.     

A PROMETHEE-based approach to portfolio selection problems

In this paper, we study the use of PROMETHEE outranking methods for portfolio selection problems. Starting from a new formulation of the PROMETHEE V method, we develop several alternative approaches based on the concepts of boundary portfolios and c-optimal portfolios. The proposed methods are compared in an extensive computational study. Results of these experiments show that methods based on the concept of c-optimal portfolios provide a good approximation to the (often computationally untractable) PROMETHEE ranking of all portfolios, while requiring only small computational effort even for large problems. For smaller problems, a PROMETHEE ranking of all boundary portfolios can be performed and provides a close approximation of the total ranking.     

Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

Donorsubstituierte 2,4-Diazacyclopentadienone und indigoide 1,3,5,7-Tetraazafulvalene

Donor Substituted 2,4-Diazacyclopentadienones and Indigoid 1,3,5,7-Tetraazafulvalenes Hydrolysis of tris(diethylamino)imidazolylium chloride gives rise to 2,5-bis-diethyl-amino-4H-imidazolin-4-one; thiolysis leads, depending on conditions, to 2,5-bis-diethylamino-4H-imidazolin-4-thione or potassium 2,6-bis-diethylamino-1,3,5,7-tetraazafulvalene-4,8-dithiolate. The latter can be protonated to form green 2,6-bis(dimethylamino)-3,4,7,8-tetrahydro-1,3,5,7-tetraaza-fulvalen-4,8-dithione, a new indigoid compound, and alkylated to give blue 2,6-bis-diethylamino-4,8-bis-alkylthio-1,3,5,7-tetraazafulvalenes. Treatment of 2,5-bis-diethylamino-4H-imidazolin-4-thione with copper furnishes 2,6,4,8-tetrakis-diethylamino-1,3,5,7-tetraazafulvalene. – Oxidation of 2,6-bis-dimethylamino-3,4,7,8-tetrahydro-1,3,5,7-tetraazafulvalen-4,8-dithione gives rise to (2,2′-bis-diethylamino-4,4′-bi(4H-imidazol)-5,5′-dithione, corresponding to dehydroindigo, and reduction leads to a colorless compound, corresponding to leucoindigo.     

Friction stir welding of API X70 steel incorporating Ti-dioxide

In the present work, the microstructural evolution and hardness of HSLA X70 joined by friction stir welding were investigated. The FSW was applied to HSLA X70 with and without the addition of titanium dioxide (TiO₂) powders. To evaluate the microstructural features and hardness of different weld zones, optical microscopy and Vickers microhardness measurements were applied. The results show that the distribution of TiO₂ powders is strongly dependent on the applied friction stir processing, which in turn changed significantly the microstructure and hardness profile. In this regard, the optimum stirring action resulted in a homogeneous and fine dispersion of particles leading to the domination of an acicular ferrite phase with a hardness of 370 HV. On the other hand, the lower stirring action resulted in coarse particles as well as the development of the polygonal ferrite structure with a hardness of ～185 HV.     

Über die lipophile Natur von Oxyalkylgruppen in Alkylethersulfaten

On the Lipophilic Nature of Oxyalkyl Groups in Alkyl Ether Sulphates Effective carbon numbers and methylene group equivalent values for tetradecane sulphonates containing oxyalkyl groups as substituents as well as and for alkyl ether sulphates containing oxyalkyl groups in the chain have been calculated. These oxyethyl groups show lipophilic character, at least up to an oxethylation degree of 10. Via ME values effective carbon numbers, critical concentrations for micelle formation and HLB-values for alkyl ether sulphates can be calculated. HLB group numbers depending on oxalkylation degree are tabulated; the known value of + 0,33 for  OCH₂CH₂ is valid only for nonionic surfactants.     

Antimicrobial Activity of Nisin and Natamycin Incorporated Sodium Caseinate Extrusion‐Blown Films: A Comparative Study with Heat‐Pressed/Solution Cast Films

Antimicrobial edible films based on sodium caseinate, glycerol, and 2 food preservatives (nisin or natamycin) were prepared by classical thermomechanical processes. Food preservatives were compounded (at 65 °C for 2.5 min) with sodium caseinate in a twin‐screw extruder. Anti‐Listeria activity assays revealed a partial inactivation of nisin following compounding. Thermoplastic pellets containing food preservatives were then used to manufacture films either by blown‐film extrusion process or by heat‐press. After 24 h of incubation on agar plates, the diameters of K. rhizophila growth inhibition zones around nisin‐incorporated films prepared by solution casting (control), extrusion blowing or heat pressing at 80 °C for 7 min of nisin‐containing pellets were 15.5 ± 0.9, 9.8 ± 0.2, and 8.6 ± 1.0 mm, respectively. Since heat‐pressing for 7 min at 80 °C of nisin‐incorporated pellets did not further inactivate nisin, this indicates that nisin inactivation during extrusion‐blowing was limited. Moreover, the lower diameter of the K. rhizophila growth inhibition zone around films prepared with nisin‐containing pellets compared to that observed around films directly prepared by solution casting confirms that nisin inactivation mainly occurred during the compounding step. Natamycin‐containing thermoplastic films inhibited Aspergillus niger growth; however, by contrast with nisin‐containing films, heat‐pressed films had higher inhibition zone diameters than blown films, therefore suggesting a partial inactivation of natamycin during extrusion‐blowing.     

Thermochemical Treatment--Technologies for Recovery and Utilisation of Materials

The arc furnace technology is an ideally suited process for the treatment of hazardous and problematic waste. The operation conditions of the arc furnace can be adapted for optimal transformation of the waste material input into raw materials and usable products. The process can significantly reduce the impact of contaminated wastes and industrial residues, and enable material conversion and separation. Thus, the products of the process have various applications. The capability of the process is illustrated with three examples, the treatment of bottom ash and filter ash from waste incineration plants, of stainless steel slags and of chromium containing residues from the refractory industry.