Deformation of Alumina/Titanium Carbide Composite at Elevated Temperatures

The deformation behavior of an Al₂O₃/30 wt% TIC composite in uniaxial tension was evaluated under vacuum over the temperature range of 1300° to 1550°C. The Al₂0₃/TiC composite exhibited the maximum elongation of 66% at an initial strain rate of 1.19 X l0^-4 s^-1 at 1550°C. The stress exponent calculated from peak stresses of true stress-true strain curves at 1500^OC was 3.8, which was in good agreement with that obtained by changing the crosshead speed during the tension test. The apparent activation energy at 20 MPa was 853 kJ/mol. In addition the deformation of the Al₂O³/TiC composite in uniaxial tension at elevated temperature was accompanied by cavitation.     

Formation of 2,4-dinitrophenylhydrazones in high-density polyethylene film irradiated with ultraviolet light

Polyethylene films were irradiated in air by ultraviolet light. 2,4-Dinitrophenylhydrazine was reacted on the irradiated films. The changes in amounts of carbonyl groups and 2,4-dinitrophenynlhydrazones formed in the films were inferred by comparing their absorptions in the infrared and ultraviolet spectra, respectively. It seems that the contents of carbonyl groups formed in the amorphous regions in the high-density polyethylene films by the irradiation were larger than the contents of carbonyl groups formed in the amorphous regions in the low-density polyethylene films. The decreases in contact angles of water on the high-density polyethylene films by the irradiation were larger than the decreases in the contact angles on the low-density polyethylene films. The amounts of 2,4-dinitrophenylhydrazones formed in the irradiated high-density polyethylene films were less than the amounts of 2,4-dinitrophenylhydrazones formed in the irradiated low-density polyethylene films.     

Flow cytometric analysis of lectin-oligosaccharide interactions by using fluorescent oligosaccharide probes

Tetraphenylethylene (TPE) derivatives have strong fluorescence in aggregated state. We report here an oligosaccharide binding assay system using tetraphenylethylene derivatives bearing oligosaccharides with aggregation-induced emission (AIE) characteristics. A tetraphenylethylene derivative bearing 6'-sialyllactose (6'SL) bound to microbeads coated with SSA lectin more effectively than RCA120 lectin. Microbeads that bound to fluorescent oligosaccharide probes could be detected by flow cytometric analysis. Tetraphenylethylene derivatives bearing oligosaccharides are useful for flow cytometric analysis of lectin-oligosaccharide interactions.     

Effect of operating factors on liquid–liquid mass transfer and dispersion pattern of sedimentary liquid in a mechanically stirred vessel

Liquid–liquid dispersion and mass transfer were investigated in mechanically stirred vessels without baffles by changing operation factors such as an impeller rotation speed, off-bottom clearance, volumetric liquid ratio, etc. The dispersion regime was categorized into five groups: the sedimentary liquid was kept at the vessel bottom (I), partially elevated without any collision (II), partially dispersed by colliding with the impeller bottom (III), both liquids were partially dispersed by collisions with impeller blades (III’), and the sedimentary liquid was completely dispersed (IV). The dispersion switched to I → II → III → IV with the increasing rotation speed and decreasing off-bottom clearance. The liquid–liquid mass transfer rate was significantly enhanced with the collision of the sedimentary liquid with the impeller bottom, and subsequently increased with the increasing rotation speed, volumetric liquid ratio, and vessel diameter and with the decreasing off-bottom clearance. A multiple regression analysis method was applied to determine the mass transfer rates of III and III’.     

Improving the mechanical properties of isosorbide copolycarbonates by varying the ratio of comonomers

Polycarbonates were synthesized by transesterification polymerization of isosorbide, bisphenol A, and diphenyl carbonate in the presence of n‐BuSn(?O)OH as the catalyst. The polymers were prepared by varying the ratio of the two monomers. The polymers exhibited good thermal stability, rigidity, and strength. The storage moduli for the polymers were 2.6 to 3.2 GPa at 25°C and increased with increasing isosorbide content. The dynamic mechanical analysis indicated that the storage moduli (E′) of the polymers are constant to higher temperatures than that of bisphenol A polycarbonate. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Influence of water content in sub-flooring materials using adhesive on chemical compounds emission

Indoor air pollution is caused predominantly by emission of primary pollutants from building materials or finishing materials. Recently, there has been increasing interest in the new secondary pollutants caused by chemical reaction of the primary pollutants. In this study, the pollutants emitted from poly(vinyl chloride) (PVC) flooring material were measured, and 2-ethyl-1-hexanol (2E1H) and volatile organic compounds (VOCs) emitted from composite building materials made of PVC flooring material used as a self-leveling flooring were measured to identify the mechanism of emission of 2E1H. The moisture sorption isotherm was measured with a Magnetic Suspension Balance to examine the moisture content of the self-leveling flooring material and its effect on emission of 2E1H. 2E1H was emitted from the PVC flooring material through hydrolysis or oxidation of di-2-ethylhexyl phthalate (DEHP). The composite building material including the self-leveling flooring material emitted more 2E1H through hydrolysis over time. It was determined that liquid prevails in the self-leveling flooring material when the water content is higher than 4% and vapor prevails when the water content is lower than 4%. The prevailing liquid in the flooring material contributes to the increased emission of 2E1H and the prevailing vapor in the material did not cause increase in emission of 2E1H. It is considered that control of water in the self-leveling flooring material or concrete slab is very important in order to inhibit emission of 2E1H through hydrolysis of DEHP on the floor.     

Improvement of carrier diffusion length in silicon nanowire arrays using atomic layer deposition

To achieve a high-efficiency silicon nanowire (SiNW) solar cell, surface passivation technique is very important because a SiNW array has a large surface area. We successfully prepared by atomic layer deposition (ALD) high-quality aluminum oxide (Al₂O₃) film for passivation on the whole surface of the SiNW arrays. The minority carrier lifetime of the Al₂O₃-depositedSiNW arrays with bulk silicon substrate was improved to 27 μs at the optimum annealing condition. To remove the effect of bulk silicon, the effective diffusion length of minority carriers in the SiNW array was estimated by simple equations and a device simulator. As a result, it was revealed that the effective diffusion length in the SiNW arrays increased from 3.25 to 13.5 μm by depositing Al₂O₃ and post-annealing at 400°C. This improvement of the diffusion length is very important for application to solar cells, and Al₂O₃ deposited by ALD is a promising passivation material for a structure with high aspect ratio such as SiNW arrays.     

Optical assessment of silicon nanowire arrays fabricated by metal-assisted chemical etching

Silicon nanowire (SiNW) arrays were prepared on silicon substrates by metal-assisted chemical etching and peeled from the substrates, and their optical properties were measured. The absorption coefficient of the SiNW arrays was higher than that for the bulk silicon over the entire region. The absorption coefficient of a SiNW array composed of 10-μm-long nanowires was much higher than the theoretical absorptance of a 10-μm-thick flat Si wafer, suggesting that SiNW arrays exhibit strong optical confinement. To reveal the reason for this strong optical confinement demonstrated by SiNW arrays, angular distribution functions of their transmittance were experimentally determined. The results suggest that Mie-related scattering plays a significant role in the strong optical confinement of SiNW arrays.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.