Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Optimizing the design of large-scale ground-coupled heat pump systems using groundwater and heat transport modeling

In order to predict the long-term performance of large-scale ground-coupled heat pump (GCHP) systems, it is necessary to take into consideration well-to-well interference, especially in the presence of groundwater flow. A mass and heat transport model was developed to simulate the behavior of this type of system in the Akita Plain, northern Japan. The model was used to investigate different operational schemes and to maximize the heat extraction rate from the GCHP system.     

Position control for a linear slider with twin linear drives

In this paper, position control of a linear slider with twin linear drives is considered. Recently, for high‐speed response, several linear motors have been used for linear slider systems. In such a linear slider, if the linear drives are controlled individually, their position responses may undergo vibrational disturbance by interaction with the output of the motors. To control this vibration, this paper presents a dynamic model of a linear slider system which consists of two motion systems decoupled by coordinate transformation, and proposes a feedback controller which is designed for these two decoupled systems. The effectiveness of the proposed method is confirmed by experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(4): 68–76, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10291     

Preparation of new redox-active polyionenes with porphyrin units in the main chain

Quaternization of trans-dipyridylporphyrin with 1,4-butaneditrifluoromethane-sulfonate affords new polyionenes containing porphyrin units in the main chain. The polymers exhibit chemical and electrochemical reversible redox activities. Weitz-type two-step redox processes similar to those of viologens account for the redox properties of the polymers. Received: 26 November 1996/Revised: 24 January 1997/Accepted: 10 February 1997     

Low levels of apoptosis and proliferative activity in colorectal villous tumors: comparison with tubular tumors

In order to clarify the cell kinetics of colorectal villous tumors (VT), 21 villous adenomatous areas and 12 carcinomatous areas within villous adenomas were investigated for proliferative activity and apoptosis and compared with a series of 41 tubular tumors (TT), demonstrating elements of intramucosal carcinomas as well as tubular adenomas (so-called carcinoma in tubular adenoma). Proliferation was estimated in terms of Ki-67 labeling indices and mitotic indices, and apoptosis was assessed by DNA nick-end labeling to give apoptotic indices. Apoptotic indices of villous adenomatous and carcinomatous regions were significantly lower than the values for their tubular counterparts. Ki-67 labeling indices were also significantly lower for adenoma components. Apoptotic indices, Ki-67 labeling indices and mitotic indices increased with atypia raised in tubular adenoma components. Correlations of mitotic indices with apoptotic indices, Ki-67 labeling indices with apoptotic indices and mitotic indices with Ki-67 labeling indices were found for each villous tumor group and tubular tumor group, and the apoptosis and proliferation ratios for villous tumors were relatively low, suggesting a tendency for greater growth due to less cell deletion. Although this is only one of the biological features of villous tumor groups, it might play a major role in generation of malignancy.     

Nonlinear stress analysis for thin spherical vessels with local non-axisymmetric imperfections

On a thin spherical shell with a local and non-axisymmetric imperfection, the magnitude of the strain concentration occurring around the imperfect region was investigated by means of a finite element method, and the quantitative determination method of it was theoretically studied. In a stress analysis of the thin shell structures, a large deformation analysis considering geometrical nonlinearity of the imperfect regions was practically necessary and important, as reported previously in detail (Ohtani et al., Int. J. Pres. Ves. & Piping, 45 (1991) 3–21). As a result of this analysis, it was seen that the imperfection induced a considerably high strain concentration, even if the amplitude of imperfection was very small, and that a tendency of strain concentration due to loading of internal pressure apparently showed a nonlinearity to the pressure. Furthermore, from a comparison of the present results for the local non-axisymmetric imperfection with the previous ones for the banded axisymmetric imperfection, which deformed uniformly on circumferential direction, it was found that a tendency of strain concentration due to this kind of local imperfection was basically similar to that of the uniform axisymmetric one. Therefore, it was clarified that the magnitude of strain in the local non-axisymmetric imperfection was calculated in practical accuracy by using the formulae presented in the previous paper for the axisymmetric one.     

Development of a city‐type compact wind power generation system

It is necessary to use renewable energy, such as photovoltaic, wind power, and biomass energy, from the viewpoint of CO₂ regulation and environmental protection of the Earth. In recent years, the tendency is toward larger wind power generation systems to achieve cheaper electricity. Generators having capacities of 1500 kW to 2000 kW tend to dominate the market. However, a large wind power generation system has limitations in terms of location and can be installed only in the suburbs. At the same time, a city‐type compact wind power generation system, designed for city needs, has more flexibility and can be installed in the residential areas of a city. In this paper, we introduce an original control operation system called a “pump‐up” operation system, designed to effectively use the city wind, and report the results of its field test. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 158(2): 56–63, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20440     

An efficient algorithm for optimal generation mix taking into account fuzziness of decision making and planning parameters

This paper presents an efficient computational algorithm for selecting the optimal generation mix under uncertain circumstances. Subjective, experiential or linguistic uncertainties are selected from among various uncertainties, i.e., we treat fuzziness in generation expansion planning. The fuzziness can be divided into: (1) the fuzziness of decision making; and (2) the fuzziness of some planning parameters, such as load growth, fuel price, and so on. Both classes of fuzziness are integrated into a fuzzy decision based on fuzzy sets theory, and then the optimal generation mix can be determined by the Fuzzy Dynamic Programming (FDP) technique. The proposed method, which is based on the dynamic programming technique, is extended by using the Bellman-Zadeh maximizing decision. In the method, each generation technology and generation capacity are selected as a stage and state, respectively. The proposed method can easily accommodate not only the fuzziness but also many constraints of generation expansion planning, such as integer solutions of unit capacities, condition of existing units, and so on. Furthermore, the arbitrary shape of membership function can be used. The effectiveness and feasibility of the proposed method are demonstrated on a typical power system model.     

Acoustic damping characterization and microstructure evolution during high-temperature creep of an austenitic stainless steel

We studied the microstructure evolution of an austenitic stainless steel, Type 316L, subjected to tensile creep at 973 K through the monitoring of shear-wave attenuation and velocity using electromagnetic acoustic resonance (EMAR). Contactless transduction based on the Lorentz force mechanism is the key to establishing a monitor for microstructural change in the bulk of metals with high sensitivity. In the short interval, 60 to 70 pct of the creep life, attenuation experiences a peak, independent of the applied stress. A drastic change in dislocation mobility and rearrangement interrupted this novel phenomenon, as is supported by observations using a scanning electron microscope (SEM) and a transmission electron microscope (TEM). The EMAR exhibited the potential for the assessment of damage advance and the prediction of the remaining creep life of metals.