Application of a novel technique for band sawing using a tip-inserted saw regarding surface profiles

One way of achieving a successful forest management leading to biodiversity conservation is to ensure that wood is processed in an efficient manner. The authors succeeded in developing a new technology for bandsawing using a tip-inserted saw. The material used for the tipped edge was High Speed Steel (HSS) of designation SHK 51 according to the Japan Industrial Standard (JIS). The efficiency of the tip-inserted saw was investigated considering its effectiveness in controlling tooth marks and washboarding patterns that sometimes occur during bandsawing. The surface profile of the workpiece generated after sawing with 700 mm and 1100 mm diameter bandmills of the laboratory and industrial type respectively were determined using a CCD laser displacement sensor of scanning length 250 mm and scanning speed of 3 mm/sec at a sampling rate of 50 Hz. Under a setup wheel rotation speed of 200 rpm and feed speed of 1 m/min, washboardings were induced during sawing with the tip-inserted saw of uniform pitch. Thereafter, a tip-inserted saw of random pitch was constructed without removing the saw from the pulley and cutting tests were performed under the same cutting conditions when washboardings were induced during sawing with the uniform pitch tipped-inserted saw. It was observed that the washboarding pattern disappeared completely. Thus the tip-inserted saw of random pitch was very effective in controlling the washboarding pattern. Comparisons of the surface profiles of the workpiece generated by sawing with uniform pitch tip-inserted and stellite-tipped saws under both laboratory and industrial conditions indicate that regardless of the type of bandmill used, the surface profile measured with the laser displacement sensor was smoother for tip-inserted saws than stellite-tipped saws.     

Local changes in blood flow within the preovulatory follicle wall and early corpus luteum in cows

Haemodynamic changes are involved in the cyclic remodelling of ovarian tissue that occurs during final follicular growth, ovulation and new corpus luteum development. The aim of this study was to characterize the real-time changes in the blood flow within the follicle wall associated with the LH surge, ovulation and corpus luteum development in cows. Normally cyclic cows with a spontaneous ovulation (n = 5) or a GnRH-induced ovulation (n = 5) were examined by transrectal colour and pulsed Doppler ultrasonography to determine the area and the time-averaged maximum velocity (TAMXV) of the blood flow within the preovulatory follicle wall and the early corpus luteum. Ultrasonographic examinations began 48 h after a luteolytic injection of PGF(2alpha) analogue was given at the mid-luteal phase of the oestrous cycle. Cows with spontaneous ovulation were scanned at 6 h intervals until ovulation occurred. Cows with GnRH-induced ovulation were scanned just before GnRH injection (0 h), thereafter at 0.5, 1, 2, 6, 12, 24 h and at 24 h intervals up to day 5. Blood samples were collected at the same time points for oestradiol, LH and progesterone determinations. Cows with both spontaneous and GnRH-induced ovulation showed a clear increase in the plasma concentration of LH (LH surge) followed by ovulation 26-34 h later. In the colour Doppler image of the preovulatory follicle, the blood flow before the LH surge was detectable only in a small area in the base of the follicle. An acute increase in the blood flow velocity (TAMXV) was detected at 0.5 h after GnRH injection, synchronously with the initiation of the LH surge. At 12 h after the LH surge, the plasma concentrations of oestradiol decreased to basal concentrations. The TAMXV remained unchanged after the initial increase until ovulation, but decreased on day 2 (12-24 h after ovulation). In the early corpus luteum, the blood flow (area and TAMXV) gradually increased in parallel with the increase in corpus luteum volume and plasma progesterone concentration from day 2 to day 5, indicating active angiogenesis and normal luteal development. Collectively, the complex structural, secretory and functional changes that take place in the ovary before ovulation are closely associated with a local increase in the blood flow within the preovulatory follicle wall. The result of the present study provides the first visual information on vascular and blood flow changes associated with ovulation and early corpus luteum development in cows. This information may be essential for future studies involving pharmacological control of blood flow and alteration of ovarian function.     

A novel method to improve low‐voltage ride‐through capability of wind turbine generators

With increasing penetration of wind farms, power grids have responded by developing specific grid codes to maintain their stability. One of the main grid codes is the low‐voltage ride‐through (LVRT) capability, which requires the wind generator to remain connected when the grid voltage sags for a certain time period. A wind farm with squirrel cage induction generators suffers this LVRT problem the most because of their direct connection to the grid and reactive power consumption. In this paper, a new method is proposed to solve this problem by shunt‐connecting a motor‐driven mechanical load to the cage wind generator. For driving mechanical loads, the induction motor is most widely used in industries. This paper studies the terminal voltage holding effect of an induction machine during grid voltage sag due to the magnetic flux holding effect and the saturation characteristic. Taking advantage of this effect, the induction motor that is used for driving mechanical load is then proposed to improve the LVRT capability of wind turbine generators. Furthermore, the change of the rotating speed or slip of the induction machine is found to have a great impact on improving the LVRT. By adding some inertia to the motor‐driven mechanical load, an enhanced voltage holding effect, and therefore LVRT improvement, is expected for the wind farm. Both simulation and experimental results prove the effectiveness of the proposed method. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Study of molecular behavior in oxidation of insulating oil using terahertz spectroscopy

The stock of aged power equipment is increasing and it is important to clarify the characteristics of deteriorated insulating oil. This paper describes a basic study of molecular behavior in the oxidation of insulating oil by terahertz spectroscopy. The oxidation of insulating oil was modeled by using various compositions of dodecane and 2‐octanol. The terahertz measurements indicated that signi?cant absorption related to hydroxyl groups (‐OH) occurred between 6 and 7 THz. The absorption band was also observed in accelerated aging alkylbenzene, which is used in power equipment as insulating oil and is sensitive to hydrogen bonds. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 183(1): 9–15, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22335     

Neutral-point voltage control for a three-level DC-AC inverterusing equivalent-input-disturbance approach

One problem with a single source three-level inverter is the drafting of its neutral-point voltage. This may occur during transition or when unbalanced loads are connected to the inverter system. Variation of neutral-point voltage may greatly deteriorate     

PZT capacitor with Ir/IrO2/Ir electrode fabricated by RTA

Abstract

PZT capacitor with direct contact between Si substrate and bottom electrode of the capacitor was obtained with Ir/IrO₂/Ir/Ti electrode, by crystallizing sol-gel PZT thin film using RTA (650°CC 30 sec.). Contact resistance for hole diameter of 0.72 μm was 19 Ω. It was observed by cross-sectional TEM that Ti silicide was formed at the interface, but there was not oxygen diffusion from PZT thin film. Fatigue property of the PZT thin film was improved by RTA compared with furnace annealed film (600°CC 60 min.). The absolute value of the remnant polarization was 13 μC/cm² for both films, but it did not degrade until 10⁸ cycles of switching for the film by RTA, while it degraded before 10⁵ cycles for furnace annealed film.     

Clarification of strain limits considering the ratcheting fatigue strength of 316FR steel

The effect of ratcheting on fatigue strength was investigated in order to rationalize the strain limit as a design criterion of commercialized fast reactor systems. Ratcheting fatigue tests were conducted at 550 °C. Duration of the ratchet straining was set for a certain number of strain cycles taking the loading condition of fast reactors into account, and the number of cycles for strain accumulation was defined as the ratchet-expired cycle. Fatigue lives decrease as the accumulated strain by ratcheting increases. Mean stress increased during the ratcheting cycle and its maximum value depended on the accumulated strain and the ratchet-expired cycle. Fatigue life reduction was negligible when the maximum mean stress was less than 25 MPa, corresponding to an accumulated strain of 2.2%. Accumulated strain is limited to 2% in the present design guidelines and this strain limit is considered effective to avoid reducing fatigue life by ratcheting. Microcrack growth behaviors were also investigated in these tests in order to discuss the life reduction mechanisms in ratcheting conditions.     

Heat labile ribonuclease HI from a psychrotrophic bacterium: gene cloning, characterization and site-directed mutagenesis

The rnhA gene encoding RNase HI from a psychrotrophic bacterium,Shewanella sp. SIB1, was cloned, sequenced and overexpressedin an rnh mutant strain of Escherichia coli. SIB1 RNase HI iscomposed of 157 amino acid residues and shows 63% amino acidsequence identity to E.coli RNase HI. Upon induction, the recombinantprotein accumulated in the cells in an insoluble form. Thisprotein was solubilized and purified in the presence of 7 Murea and refolded by removing urea. Determination of the enzymaticactivity using M13 DNA–RNA hybrid as a substrate revealedthat the enzymatic properties of SIB1 RNase HI, such as divalentcation requirement, pH optimum and cleavage mode of a substrate,are similar to those of E.coli RNase HI. However, SIB1 RNaseHI was much less stable than E.coli RNase HI and the temperature(T_1/2) at which the enzyme loses half of its activity upon incubationfor 10 min was ~25°C for SIB1 RNase HI and ~60°C forE.coli RNase HI. The optimum temperature for the SIB1 RNaseHI activity was also shifted downward by 20°C compared withthat of E.coli RNase HI. Nevertheless, SIB1 RNase HI was lessactive than E.coli RNase HI even at low temperatures. The specificactivity determined at 10°C was 0.29 units/mg for SIB1 RNaseHI and 1.3 units/mg for E.coli RNase HI. Site-directed mutagenesisstudies suggest that the amino acid substitution in the middleof the     

Electrical resistivity and thermopower of (La1−xSrx)MnO3 and (La1−xSrx)CoO3 at elevated temperatures

Electrical resistivity and Seebeck (S) measurements were performed on (La_1−xSr_x)MnO₃ (0.02x0.50) and (La_1−xSr_x)CoO₃ (0x0.15) in air up to 1073 K. (La_1−xSr_x)MnO₃ (x0.35) showed a metal-to-semiconductor transition; the transition temperature almost linearly increased from 250 to 390 K with increasing Sr content. The semiconductor phase above the transition temperature showed negative values of S. (La_1−xSr_x)CoO₃ (0x0.10) showed a semiconductor-to-metal transition at 500 K. Dominant carriers were holes for the samples of x0.02 above room temperature. LaCoO₃ showed large negative values of S below ca. 400 K, indicative of the electron conduction in the semiconductor phase.     

Phase equilibria of Sn-In based micro-soldering alloys

The phase equilibria of Sn-In-X (X=Ag, Bi, Sb, Zn), the most basic information necessary for the development of Pb-free micro-soldering alloys, were studied using the CALPHAD method. Thermodynamic analyses for describing the Gibbs energies of the constituent phases were made by optimizing the obtained data on the experimental phase diagrams, and such data in the literature, including data on thermochemical properties. The present results combined with the thermodynamic database which was recently developed by our group [I. Ohnuma et al., J. Electron. Mater. 28, 1164 (1999)] provide various information on phase equilibria such as liquidus and solidus surfaces, isothermal and vertical section diagrams, mole fractions of the phase constitutions, etc., and thermodynamic properties such as activity, heat of mixing, surface energy, viscosity, etc., in multi-component soldering alloy systems including the elements of Pb, Bi, Sn, Sb, Cu, Ag, Zn, and In. Typical examples for the phase diagrams and thermodynamic properties of Sn-In-X ternary systems are shown. The application of the database to the alloy design for Pb-free solders is also presented.