STUDY ON THE TENSILE FATIGUE DAMAGE OF QUASI—ISOTROPIC COMPOSITE LAMINATES

Quasi-isotropic. laminates have isotropic elastic properties in all in-plane directions. Therefore, this kind of laminate is widely used for structural elements. The simplest stacking sequence of quasi-isotropic laminates is [0/-60/60]s. When the direction of applied axial load to [0/-60/60]s laminate is inclined at a 30-degree angle, we have the other quasi-isotropic laminate [30/-30/90]s under axial load. The failure mechanisms of these two laminates are, however, entirely different from each other because these two laminates have different distribution of the interlaminar stresses. It was confirmed by tensile fatigue tests that the [0/-60/60]s laminate does not show any visible fatigue damage, but the [30/-30/90]s laminate develops edge-delamination during cyclic loading. The analytical results were in good agreement with the experimental results.     

STUDY OF MECHANISM OF RQ EMBRITTLEMENT OF Fe_(73.5)Cu_1-Nb_3Si_(13.5)B_9 NANOCRYSTALLINE SOFT MAGNETIC ALLOY

Rapidly quenching embrittlement (RQE) sometimes appears in Fe73.5Cu1Nb3Si13.5B9 nanocrystalline soft magnetic alloy (FINEMET) during production process. As a re-sult of RQE the ductility of the as-quenched ribbon drops seriously. The mechanism of RQE has been elucidated in the recent works of current authors. It was believed that RQE is due to the structural relaxation but not related to a-Fe(Si) crystallization. In this paper, the high resolution TEM (HRTEM) method and image digital processing were applied to analyze the HRTEM images of two FINEMET rapidly quenched ribbons with different thicknesses in detail. In the thinner ductile sample, the ordering domains with the size of about 3nm are observed. In the thicker RQE sample, the metastable nanocrystalline domains with the size of 18nm are observed along with the structural relaxation. These domains seem to have Fe3B-like metastable phase struc-ture on nanometer scale. The result indicates that the local atomic ordering regions extend when RQE induced     

A STUDY OF B-P UNIFIED VISCOPLASTIC CONSTITUTIVE MODEL

By combining the Bodner-Partom constitutive model and equivalent stress function, finite element methods and program on analyzing non-elastic deformation and stress for thermal viscoplastic material are studied in this paper, and it's the first time that this material model is used in a kind of engineering software-MARC. Thermal viscoplastic behavior of high temperature alloy GH536 specimen with gap is analyzed by this program. The research results show it is feasible to analyze thermal viscoplastic behavior of specimen or structure by applying B-P model.     

THE INFLUENCE OF ENVIRONMENT ON FATIGUE AND FRACTURE OF IRON ALUMINIDES

ＴＨＥＩＮＦＬＵＥＮＣＥＯＦＥＮＶＩＲＯＮＭＥＮＴＯＮＦＡＴＩＧＵＥＡＮＤＦＲＡＣＴＵＲＥＯＦＩＲＯＮＡＬＵＭＩＮＩＤＥＳＳＴＯＬＯＦＦ，Ｎ．Ｓ．ａｎｄＡＬＶＥＮ，Ｄ．Ａ．（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓＥｎｇｉｎｅｅｒｉｎｇＲｅｎｓｓｅ...     

工业纯钛中反常的力学性能与杂质分布的关系

一、引言为了改变工业纯钛中的杂质分布,从而减少它对蠕变性能,尤其是在发生应变时效现象的温度范围内的蠕变性能的影响,我们对材料进行了各种不同的热处理实验。在α区进行800℃2小时再结晶处理之后的热处理参数(温度、时间、冷却速率……)     

还原方法对粉末冶金钼性能的影响

钼粉的形态取决于是由升华的三氧化物MoO_3还是由二钼酸铵(NH_4)_2Mo_2O_7制得的金属,还取决于还原过程使用的还原剂。由于粉末形态不同,使烧结产品的密度不同,同时影响再结晶溫度、强度和延性。     

Electronic struture of titanium silicides

ＥＬＥＣＴＲＯＮＩＣＳＴＲＵＣＴＵＲＥＯＦＴＩＴＡＮＩＵＭＳＩＬＩＣＩＤＥＳＬｏｎｇ，Ｘｉａｎｇｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，Ｃｈａｎｇｓｈａ４１００８３）Ｃ...     

STUDY ON THE STABILITY OF T’PHASE IN THE Al-Zn-Cu TERNARY SYSTEM

The phase constitutes and phase compositions in the eight alloys designed with dif-ferent compositions of Al--Zn--Cu system have been determined after the homogenoustreatment and then equilibrium cooling to 20℃ by use of optical microscope, electronprobe microanalysis and X--ray diffraction. It has been found that there existed the T'phase in the seven alloys. Consequently, it was testified that the T' phase was stableat room temperature. At the same time, the phase relationship was not locally rightfor the isothermal section of 20℃ of Al--Zn--Cu system of the ASM published in 1997.     

Comparing the Variation of Needle and Wood Terpenoids in Scots Pine Provenances

We determined variation in both the concentration and composition of terpenoids in needles and wood within nine Scots pine (Pinus sylvestris) provenances. Seedlings of different provenances representing a 1200-km N–S transect from Estonia to northern Finland were cultivated in Suonenjoki nursery field, central Finland, for seven years. Growth of seedlings and the number of vertical resin ducts in wood were also determined. -Pinene and 3-carene were the major monoterpenes both in the needles and wood. The total monoterpene concentration was about five times higher in the needles than in the wood. A strong positive correlation was found between proportional quantities of several terpenes of the needles and wood, particularly for 3-carene, sabinene, and terpinolene. The needles contained both labdane-type and tricyclic resin acids, whereas the wood contained only tricyclic ones. The wood had a four times higher tricyclic resin acid concentration than the needles. The highest total monoterpene concentration in the needles and in the wood occurred in the most northern Muonio provenance and in the most southern Saaremaa provenance plants, respectively. The amount of high 3-carene genotype trees decreased among the northern provenances. The wood of the most northern Muonio provenance showed the lowest total resin acid concentration, but provenance did not affect total tricyclic resin acids in the needles. Korpilahti provenance trees from central Finland had the best growth in height. In addition, Korpilahti and Ruokolahti provenance trees showed largest radial growth of stem and smallest number of vertical resin ducts. The results suggest that especially the proportional quantity of 3-carene in the needles could be used in estimating the amount of this compound in the wood and vice versa.