Phase Studies Concerning Sintering in Aluminas Doped with Ti4+

Previous solid state analyses of sintering in Ti⁴⁺-doped-commercial alumina are shown to be in error because a liquid phase exists in the appropriate region of the Al₂O₃−TiO₃−Na₂Ophase diagram at least by 1350^°C, a temperature lower than that at which "solid state" studies were conducted. It is suggested that liquid-phase sintering is a much more common occurrence than was realized formerly.     

The function of bleaching earths in the processing of palm,palm kernel and coconut oils

The results presented in the literature, which attempt to elucidate the mechanisms by which triglyceride oils are bleached by earths, are reviewed. The impact of this work and how the mechanistic proposals affect changes in oil properties are considered, with particular emphasis on the needs of the palm oil processor. Important properties include color, metals and phosphorus content and oxidative stability of the oil. Investigations made in our own laboratories have been aimed at elucidating the effect of varying physical and chemical properties of the bleaching earth on the quality of bleached and deodorized oils. Techniques used in this work are pore-size distribution, surface area, scanning and transmission electron microscopy and a variety of chemical and X-ray analysis methods. The ability to vary such parameters in montmorillonite clays by alteration of process conditions to give materials with specific performance characteristics is demonstrated. Comparisons are made between acid-activated montmorillonites and other clay types.     

Effects of the thermal history on the hydraulic properties of slags

Glasses with two composition in the CaO---Al₂O₃---SiO₂ system were prepared with different cooling conditions. Glass A has a eutectic composition of wollastonite-gehlenite-rankinite and glass B has that of wollastonite-gehlenite-anorthite. The effects of the thermal history on the structure and hydraulic properties were discussed. Effects of cooling rate on the physical and chemical properties of glasses are found to be different with chemical composition of glass. Cooling rate affects the hydraulic reactivity and crystallization temperature, especially in glass A, but scarcely affects the physical properties such as chemical shift of AlK and surface basicity of the glass.     

Pressure swing adsorption: Development of an equilibrium theory for gas separations

Two versions of the pressure swing adsorption process are analysed as a means for purification of the light component of a binary feed of arbitrary composition. Local equilibrium with linear, uncoupled isotherms is assumed. The results of the analysis show that a critical pressure ratio must be exceeded before complete purification is possible and that this pressure ratio increases as the light-component content of the feed decreases. When clean up of the light component is complete, pressurization with product leads to higher light-component recoveries than pressurization with feed. This difference becomes large for small separation factors, small fractions of the light component in the feed, and large pressure ratios.     

Perturbation techniques for detecting domain errors

Perturbation testing is an approach to software testing which focuses on faults within arithmetic expressions appearing throughout a program. This approach is expanded to permit analysis of individual test points rather than entire paths, and to concentrate on domain errors. Faults are modeled as perturbing functions drawn from a vector space of potential faults and added to the correct form of an arithmetic expression. Sensitivity measures are derived which limit the possible size of those faults that would go undetected after the execution of a given test set. These measures open up an interesting view of testing, in which attempts are made to reduce the volume of possible faults which, were they present in the program being tested, would have escaped detection on all tests performed so far. The combination of these measures with standard optimization techniques yields a novel test-data-generation method called arithmetic fault detection     

Hydrodynamic loadings due to the motion of large offshore structures

A very effective non-reflecting boundary condition is proposed for the three-dimensional finite element analysis of hydrodynamic loads on offshore structures under motion due to earthquake, waves or machinery forces. The effect of surface waves is considered and the analysis is conducted in the frequency domain. The structure is assumed to be sufficiently large such that the non-linear effect of drag force is negligible. The unbounded extent of water surrounding the structure is assumed to be incompressible. The boundary condition, which is derived for the general analysis of structure-water interaction, is found to depend on the frequency of excitation, the location of the truncation boundary and the depth of water in the far field. Through some simplified numerical examples, it is shown that the proposed technique is very efficient for a wide range of the frequency of excitation. Incorporation of the boundary condition into a finite element program requires practically no extra effort.     

Conversion of acrylonitrile-based precursors to carbon fibres

The progress of stabilization of two compositions of acrylic fibres with various orientations has been followed by a variety of techniques. The thermooxidative treatments for stabilization have been carried out in a continuous process and also in a batch process under free shrinkage, constant length and constant tension conditions. The morphological model of acrylic fibres consists of an alternating sequence of laterally ordered and laterally disordered regions along the fibre direction. This structure is consistent with the observations based on small-angle X-ray scattering of copper- impregnated precursor fibres and thermomechanical response, thermal stress development, calorimetry, wide- and small-angle X-ray scattering and sonic modu-lus measured at different extents of stabilization. Lateral as well as orientational order in these fibres can be increased markedly through a high-temperature deformation process prior to stabilization. An increase in perfection and extent of order is observed in the early stages of stabilization. There is also a simultaneous decrease in the orientation of the disordered phase at this stage and the extent of this decrease depends on the axial constraints imposed on the fibre. Little difference in the rate of stabilization is observed as measured by density or oxygen uptake for fibres with different extents of orientation, lateral order or restraint. Fibres containing itaconic add, a stabilization catalyst did show an increased rate of stabilization. Inferences have been drawn regarding additional research pertaining to achieving high order in precursor fibres, minimizing orientational relaxation during oxidative stabilization, and the techniques for monitoring the extents of the stabilization treatment and the changes in relevant morphological parameters.     

Low-cost, high-efficiency quasi-planar array of waveguide-fed circularly polarized microstrip antennas

A low-cost quasiplanar Ku-band array of circularly polarized microstrip antennas benefiting from a low-loss waveguide feed network is demonstrated (patent pending). The 32 elements of the array which are arranged in a 2-by-16 configuration are subdivided into four two-by-four subarrays. To maintain feed losses and thus the overall noise temperature at a minimum, the subarrays are excited using a one-by-four corporate feed network of hollow metallic waveguides. This network is composed of E-plane components such as Tee-junctions and bends and is manufactured out of only two metallic pieces that accommodate the feed network in the form of milled grooves. Because of insensitivity of the exploited E-plane components to air gaps or slight misalignments, the pieces are secured together with only four screws without welding, braising, or conducting adhesives. Owing to a low-loss foam substrate, the array elements show high circular polarization gain of 9 dBic and wide relative bandwidth of 4%. To achieve circular polarization, use is made of circular patches with two nearly perpendicular perturbations. Using sequential rotation of the elements along with quadrature phase shifting, the axial ratio of the array is reduced to 1 dB over 4% of bandwidth. The measured circular polarization gain of the array amounts to 23 dBic with an aperture efficiency of 63% in the Ku-band of frequencies. The achieved efficiency, which is higher than the reported efficiency for comparable planar arrays with microstrip feed networks, can be credited to the low losses of only 0.2 dB in its waveguide corporate feed. The paper also presents measurement results for an arrangement of two inclined single arrays mounted in parallel. This configuration which has a measured circular polarization gain of 25.7 dBic with an axial ratio of 1 dB is desirable for mobile low-profile antenna systems.     

Institutional research productivity in industrial/organizational psychology.

Updated the report of W. M. Cox and V. Catt (see record 1978-21651-001) by determining the 40 top contributing institutions to the Journal of Applied Psychology, 1976–1982, and assessed the generalizability of productivity rankings based solely on contributions to this journal. A number of industrial and organizational psychologists were asked to indicate all the journals in which psychologists in the field were likely to publish. Five journals suggested by these nominators were used for comparison in the review. A list of the 40 most productive graduate programs based on these 5 journals is included. Results show the inadequacy of Cox and Catt's decision to base productivity ratings solely on contributions to 1 journal. Using 5 journals, 4 programs were catapulted into the top 10 rankings, while 7 programs dropped from top rankings in the Cox study (1970–1975) to below the 65th rank in the present study. Using only the Journal of Applied Psychology contributions, 2 of these programs ranked in the top 10, 1976–1982. (5 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)