Mild hypothermia: therapeutic window after experimental cerebral ischemia

The treatment of cerebral ischemia remains a formidable challenge in neuroscience today. Mild hypothermia has been shown to be an effective neuroprotective agent. Despite the great volume of published research, the therapeutic window of mild hypothermia has not been precisely elucidated. Using a model of reversible focal cerebral ischemia in the rat, this study was undertaken to define the optimal duration of hypothermic application and the maximal postischemic delay in hypothermic application before which optimal therapeutic effect is noted. Focal ischemia was induced by temporary occlusion of the middle cerebral artery and both carotid arteries in Sprague-Dawley rats for a period of 3 hours. In the first study, mild hypothermia (32-33 degrees C) was induced at the onset of ischemia in four groups of rats for varying lengths of time ranging from 1 to 4 hours. The animals were killed after 3 days, and their brains were sliced and stained. Infarcted volume was measured using a computerized image analyzer. The infarct volumes were 211 +/- 4.5, 214.2 +/- 8.0, 199.5 +/- 5.3, 171.3 +/- 9.1, and 169.8 +/- 6.5 mm3 (mean +/- standard error of the mean, n = 6 per group) for the control, 1-hour, 2-hour, 3-hour, and 4-hour groups, respectively. On the basis of the results from the above study, a 3-hour duration of hypothermia was then applied to animals at 0, 15, 30, or 45 minutes after the ischemic onset. The volumes of infarction for these four respective groups were: 171.3 +/- 9.1, 173 +/- 5.7, 179.3 +/- 5.2, and 206.2 +/- 8.4 mm3 (mean +/- standard error of the mean, n = 6 per group). These results demonstrated that optimal duration of mild hypothermia was at least 3 hours (P < 0.001) when applied within the first 30 minutes after the onset of ischemia (P < 0.001).     

Interaction of nonylphenol and hepatic CYP1A in rats

Both estradiol and nonylphenol (NP) inhibited hepatic microsomal 7-ethoxyresorufin O-deethylase (EROD) activity of beta-naphthoflavone-treated rats. Enzyme kinetic analyses (Lineweaver-Burk plots) using different estradiol and NP concentrations with graded increases in the concentrations of the substrate, ethoxyresorufin, showed that the inhibition was of a competitive nature at all concentrations of estradiol or NP used. Thus, the mechanism by which NP inhibits EROD activity is similar to that of estradiol. NP, however, was much less potent than estradiol. Young rats treated in vivo with 80 mg/kg body weight of NP demonstrated a slight but significant decrease in their hepatic microsomal EROD activity and CYP1A protein as measured by western blot analysis. In addition, treatment with NP led to a decrease in the steady-state levels of hepatic CYP1A mRNA in rats, suggesting that NP acted at the pre-translational level. The competitive nature of inhibition by NP on hepatic microsomal EROD activity indirectly suggests that this compound is a possible substrate of the CYP1A enzyme. Furthermore, NP had a moderate modulating effect on the expression of CYP1A in rat liver.     

Cardiac dysrrhthmia in systemic disease

This is an ECG of a 6-year-old girl. She presented to us for management of epilepsy. Magnetic resonance imaging (MRI) of the brain showed multiple lesions consistent with cortical and subcortical tubers. There were also achromic spots on her skin and echocardiography demonstrated a rhabdomyoma near the right ventricular outflow tract. A diagnosis of tuberous sclerosis, an autosomal-dominantly inherited condition, was made. What is abnormal about the ECG?     

The small-cell variant of mycosis fungoides. A clinicopathological and quantitative electron microscopic study on 14 patients

Small-cell variants of Sézary syndrome and mycosis fungoides (MF) have been described. However, in these studies the nuclear area of the small-cell variant of MF (SC-MF) as compared to histological classical MF (CL-MF) was not characterized objectively by quantitative electron microscopy. In a 14-year follow-up period, of a total of 76 patch/plaque stage MF patients seen in the Department of Dermatology of the University Hospital Utrecht, 14 (18%) had an infiltrate composed of atypical lymphocytes characterized by a distinctly smaller cell diameter and smaller, hyperchromatic, deeply indented nuclei as compared to the usual cell type of MF. The aim of the investigation was to confirm this observation objectively using quantitative electron microscopy (morphometry) and to define SC-MF as compared to CL-MF. The study was performed on the 14 patients with SC-MF, and 10 patients with clinical and histological CL-MF and 4 patients with chronic eczema. Electron micrographs of sections obtained from each biopsy were analysed by computer to produce the following data: a nuclear contour index (NCI), the mean nuclear area (MNA), the mean nuclear area of the cells above the 75th percentile (P75NA) and the percentage of cells larger than 30 microm2. The values of MNA differed significantly between patients with SC-MF and those with CL-MF (17.6 vs 23.2 microm2; P = 0.02), as did the values of P75NA (20.7 vs 27.9 microm2; P = 0.01). The NCI of the SC-MF and CL-MF patients were similar. These results are consistent with our observations that SC-MF does indeed exist.     

Curing characteristics of a composite matrix

The account describes investigations into the variations of specific volume and viscosity of a typical high-performance epoxy resin during various time-temperature cycles. The work was undertaken primarily to provide additional background information relating to the nature and causes of fibre kinking which has been observed in laminates comprising epoxy-carbon composite. The investigation has quantified certain characteristics of the resin which are presumed to be major contributory factors in the occurrence of fibre kinking. It is concluded that a simple solution to the general problem cannot be identified, although some possibilities are discussed for individual cases.     

NMR and sedimentation studies of a polymeric steric stabilizer for alumina

The sedimentation behavior of alumina powder has been studied in the presence of poly-vinylpyrrolidone (PVP) and poly(vinylpyrrolidone-co-vinyl acetate) (PVP/VA) in both thermodynamically “good” and “poor” solvents for the PVP homopolymer. PVP/VA provides higher sediment densities than does its PVP homopolymer counterpart. Solutionstate ¹³C-T₁ spin-lattice relaxation measurements were made on analogous mixtures both with and without alumina powder. The NMR results suggest that the PVP/VA copolymer is anchored to the alumina powder surface by means of VA moieties, whereas the PVP moieties extend into the continuous phase of the slurry medium. Thus, the higher settling densities that are observed in the presence of PVP/VA can be attributed to a steric stabilization mechanism. © 1993 John Wiley & Sons, Inc.     

The mechanism of discharge of sintered plate cadmium electrodes

Sintered plate Cd electrodes have been studied in alkaline solutions using potentiostatic and galvanostatic techniques. The behaviour is, in many ways, similar to that of a flat Cd electrode. A pseudo steady-state current is found due to the dissolution of Cd as Cd(OH)²–₄. At more anodic potentials passivation occurs due to the solid state formation of Cd(OH)₂. This model can account for the results obtained on galvanostatic discharge.     

A non‐isothermal finite element model for injection stretch‐blow molding of PET bottles with parametric studies

A non‐isothermal finite element (FE) model for the injection stretch‐blow molding (ISBM) process of polyethylene terephthalate (PET) bottles is presented in this paper. The constitutive behavior of PET is modeled by the physically based Buckley glass‐rubber model in form of UMAT in ABAQUS. The heat transfer between the stretch rod, the preform, and the mold is modeled. Particular attention is paid to thermal and contact modeling, material model, and selection of proper element types. Extensive FE simulations are carried out to model ISBM of a 20 g‐330 ml bottle made in plant tests. Comparisons of numerical results with the measurements demonstrate that the model can satisfactorily predict the bottle thickness and material distributions. Significant nonlinear differentials are found in strain, temperature, and temperature reduction rate in both bottle thickness and length direction during the process. A volume approach is therefore necessary for accurate predictions of final bottle properties because they are governed by orientation and crystallinity, which are highly temperature and strain dependent. Parametric studies on contact modeling and heat transfer coefficient are also conducted and the results are discussed. Polym. Eng. Sci. 44:1379–1390, 2004. © 2004 Society of Plastics Engineers.     

The effect of handle friction and inward or outward torque on maximum axial push force

OBJECTIVE: To investigate the relationship among friction, applied torque, and axial push force on cylindrical handles. BACKGROUND: We have earlier demonstrated that participants can exert greater contact force and torque in an "inward" movement of the hand about the long axis of a gripped cylinder (wrist flexion/forearm supination) than they can in an "outward" hand movement. METHOD: Twelve healthy participants exerted anteriorly directed maximum push forces along the long axis of aluminum and rubber handles while applying deliberate inward or outward torques, no torque (straight), and an unspecified (preferred) torque. RESULTS: Axial push force was 12% greater for the rubber handle than for the aluminum handle. Participants exerted mean torques of 1.1, 0.3, 2.5, and -2.0 Nm and axial push forces of 94, 85, 75, and 65 N for the preferred, straight, inward, and outward trials, respectively. Left to decide for themselves, participants tended to apply inward torques, which were associated with increased axial push forces. CONCLUSION: Axial push force was limited by hand-handle coupling--not the whole body's push strength. Participants appeared to intuitively know that the application of an inward torque would improve their maximum axial push force. Axial push forces were least when a deliberate torque was requested, probably because high levels of torque exertions interfered with the push. APPLICATION: A low-friction handle decreases maximum axial push force. It should be anticipated that people will apply inward torque during maximum axial push.