Rubber-modified epoxy resins containing high functionality acrylic elastomers

The effect of the functionality of n-butylacrylate/acrylic acid copolymers upon the impact resistance of epoxy resins modified with these rubbery copolymers as a second phase was investigated using a high speed tensile test and scanning electron microscopy. It was found that an optimum functionality of copolymer existed for maximum impact resistance. This optimum value was the result of the competition between the amount of rubber–matrix reaction, an increases in which tended to increase toughness, and solubility of the rubber in the epoxy matrix, which eventually decreased toughness.     

Lewis acidity as an explanation for oxide promotion of metals: implications of its importance and limits for catalytic reactions

Sub-monolayer quantities of metal oxides are found to influence CO hydrogenation, CO₂ hydrogenation, acetone hydrogenation, ethylene hydroformylation, ethylene hydrogenation, and ethane hydrogenolysis over Rh foils. The metal oxides investigated include AlOx, TiOx, VOx, FeOx, ZrOx, NbOx, TaOx, and WOx. Only those reactions involving the hydrogenation of C-O bonds are enhanced by the oxide overlayers. The coverage at which maximum rate enhancement occurs is approximately 0.5 ML for each oxide promoter. Titanium, niobium, and tantalum oxides are the most effective promoters. XPS measurements after reaction show that of the oxides studied titanium, niobium, and tantalum oxide overlayers are stable in the highest oxidation states. The trend in promotion effectiveness is attributed to the direct relationship between oxidation state and Lewis acidity. For the oxide promoters, bonding at the metal oxide/metal interface between the O-end of adsorbed CO and the Lewis acidic oxide is postulated to facilitate C-O bond dissociation and subsequent hydrogenation.     

High-Temperature Structural Phase Transition in Ca0.7Ti0.7La0.3Al0.3O3: Investigation by Synchrotron X-Ray Diffraction

Mixed-oxide prepared Ca_0.7Ti_0.7La_0.3Al_0.3O₃ (CTLA) ceramics (≈96% dense), grain size 6–7 μm, with dielectric properties (at 4 GHz) of ɛ_r≈46, Q × f ≈38 000 GHz, and τ_f+13 ppm/°C, were studied at 25°–1300°C using synchrotron X-ray powder diffraction. At room temperature, CTLA exhibits a distorted orthorhombic structure, with two tilt systems: a =5.40383 (4) Å, b =5.41106 (6) Å, and c =7.64114 (7) Å with space group Pbnm . At 1050°±25°C, there is a transition from orthorhombic ( Pbnm ) to tetragonal ( I 4/ mcm ), with a simpler tilt arrangement. The lattice parameters at 1100°C were: a =5.44285 (4) Å and c =7.68913 (8) Å.     

Raman studies of peroxide formation,decomposition, and reduction on Ba/MgO

Ba/MgO is an active catalyst for the oxidative coupling of methane to form ethane and ethylene. It has been proposed that activation of methane occurs via reaction with peroxide species present at the surface of the catalyst. In the present work, Raman spectroscopy has been used to investigate the formation, decomposition, and reduction of BaO₂ on 4 mol% Ba/MgO. The presence of BaO₂ is evidenced by the presence of a band at 842 cm^–1. The peroxide forms above 300°C but is stable to decomposition at temperatures up to 500°C. Reduction of BaO₂ to BaO proceeds via Ba(OH)₂. BaCO₃ forms when either BaO or BaO₂ is exposed to CO₂. Once formed, BaCO₃ is stable to decomposition in He or O₂ at temperatures up to 500°C. Only BaCO₃ is observed when a mixture of CH₄ and O₂ is passed over the catalyst at 500°C.     

Effects of metal-support interactions on the synthesis of methanol over palladium

The synthesis of methanol and other products from CO and H₂ was studied over Pd catalysts prepared by adsorption of Pd(π-C₃H₃)₂ on MgO, ZnO, La₂O₃, γ-Al₂O₃, SiO₂, TiO₂, and ZrO₂ as well as over a SiO₂-supported Pd catalyst prepared from PdCl₂ and Pd black. Both the activity and selectivity of Pd were affected strongly by the nature of the support and the composition of the Pd precursor. The specific activity for methanol synthesis decreased in the order $\text{Pd}\text{La}{}_2\text{O}{}_3$ ? $\text{Pd}\text{SiO}{}_2$ [derived from PdCl₂] > $\text{Pd}\text{ZrO}{}_2$ > $\text{Pd}\text{ZnO}\text{≈}\text{Pd}\text{MgO}$ > PdTiO₂ > $\text{Pd}\text{Al}{}_2\text{O}{}_3\text{≈}\text{Pd}\text{SiO}{}_2$ [derived from Pd(π-C₃H₅)₂] ? Pd black, while the specific activity for hydrocarbon synthesis decreased in the order $\text{Pd}\text{TiO}{}_2\text{?}\text{Pd}\text{ZrO}{}_2$ > $\text{Pd}\text{La}{}_2\text{O}{}_3$ > $\text{Pd}\text{Al}{}_2\text{O}{}_3\text{≈}\text{Pd}\text{SiO}{}_2$ [derived from PdCl₂] ? $\text{Pd}\text{SiO}{}_2$ [derived from Pd(π-C₃3H₅)₂] ≈ Pd black ? $\text{Pd}\text{MgO}\text{?}\text{Pd}\text{ZnO}$. Dimethyl ether production was observed over four of the catalysts and the activity for formation of this product decreased in the order $\text{Pd}\text{Al}{}_2\text{O}{}_3\text{?}\text{Pd}\text{TiO}{}_2\text{?}\text{Pd}\text{MgO}\text{≈}\text{Pd}\text{ZrO}{}_2$. The effects of support composition on the catalytic properties of Pd are discussed in the light of current ideas concerning metal-support interactions and the acid-base properties of the support.     

The influence of oxygen vacancies on piezoelectricity in samarium-doped Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramics

A study of 0.71Pb(Mg_1/3Nb_2/3)O₃-0.29PbTiO₃ shows that, when it is doped with 2.5% Sm on the A-site, in addition to an almost threefold increase in piezoelectric charge coefficient and dielectric permittivity, there is a 2 order of magnitude reduction in conductivity, attributed to a decrease in oxygen vacancy concentration. An analysis of the nonlinearity of permittivity with respect to field amplitude shows that both the reversible and irreversible contributions increase significantly with Sm-doping, with simple models showing that these changes are consistent with a reduction in the concentration of dipolar defects that can inhibit both polarization rotation and domain wall translation. Contrary to the argument that doping increases heterogeneity, there is little change in the diffuseness of the peak in permittivity as a function temperature, whilst there is a 15% increase in spontaneous polarization with Sm addition. Through comparison of the Rayleigh law parameters with those published for other piezoelectric materials, it is concluded that a significant contribution to the observed increase in piezoelectric performance due to Sm-doping of PMN-PT is similar in origin to that seen in soft, donor-doped PZT and other conventional piezoelectric ceramics.     

Effects of composition and phase relations on mechanical properties and crystallization of silicate glasses

Crystallization, mechanical properties, and workability are all important for the commercialization and optimization of silicate glass compositions. However, the inter-relations of these properties as a function of glass composition have received little investigation. Soda-lime-silica glasses with Na₂O-MgO-CaO-Al₂O₃-SiO₂ compositions relevant to commercial glass manufacture were experimentally studied and multiple liquidus temperature and viscosity models were used to complement the experimental results. Liquidus temperatures of the fabricated glasses were measured by the temperature gradient technique, and Rietveld refinements were applied to X-Ray powder diffraction (XRD) data for devitrified glasses, enabling quantitative determination of the crystalline and amorphous fractions and the nature of the crystals. Structural properties were investigated by Raman spectroscopy. Acoustic echography, micro-Vicker's indentation, and single-edge-notched bend testing methods were used to measure Young's moduli, hardness, and fracture toughness, respectively. It is shown that it is possible to design lower-melting soda-lime-silica glass compositions without compromising their mechanical and crystallization properties. Unlike Young's modulus, brittleness is highly responsive to the composition in soda-lime-silica glasses, and notably low brittleness values can be obtained in glasses with compositions in the wollastonite primary phase field: an effect that is more pronounced in the silica primary phase field. The measured bulk crystal fractions of the glasses subjected to devitrification at the lowest possible industrial conditioning temperatures indicate that soda-lime-silica glass melts can be conditioned close to their liquidus temperatures within the compositional ranges of the primary phase fields of cristobalite, wollastonite, or their combinations.     

表面工程系统接触力学模型

在任何严峻条件下现代机械运行中综合性能的迫切需求促进了许多先进表面工程技术的迅速发展。因而，设计者在结构设计时将有许多表面工程技术可以选择。但是，怎样为一种特定的应用选择一种最优化的表面工程方法对设计者来说又是一种挑战。为了这个目标，在现代多层表面接触理论的基础上建立起一种接触力学模型，考虑到了多层结构、真实表面粗糙度和摩擦影响。这种力学模型可以成功地预测表面工程结构的性能。文中首先回顾了赫兹接触理论的发展过程，然后讨论了伯明翰多层真实粗糙表面接触力学模型，并用实例示范了一系列关于动载荷下表面工程结构设计的主要步骤。     

A note on the optimal pricing and production decisions with price‐driven substitution

Recently, Kim and Bell ( 2011 ) developed a revenue managemnent pricing model with price‐driven substitution. The authors considered production decisions under unlimited production capacity and investigated the impact of price‐driven substitution on a firm's pricing and production decisions. The authors modeled the consumer demands for each market segment as linear additive demand function based on exogenous variables, where demand substitution occurred as a function of price differences between the two products. In this article, we extend this work to examine the impact of a production capacity constraint on the firm's joint pricing and inventory decisions. Based on this extended model, we investigate the impact of price‐driven substitution on a firm's pricing and production decisions where there is a limit on total capacity. We show how revenue managers should adjust prices and production levels to take into account price‐driven substitution under a capacity constraint setting. Both deterministic and stochastic models are developed, and the impact of price‐driven substitution and a capacity constraint on the optimal prices, production levels, and revenues is illustrated.     

Bithalamic hyperintensity on T2-weighted MR: vascular causes and evaluation with MR angiography

PURPOSE: To determine whether MR angiography can be used to differentiate between the two vascular causes of bithalamic hyperintensity on T2-weighted MR images: "top of the basilar" artery occlusion and deep cerebral vein thrombosis. METHODS: A retrospective review identified six patients with bithalamic T2 hyperintensity of vascular causes. MR angiography was performed in four patients, MR angiography and conventional angiography in one patient, and conventional angiography in one patient. Data pertaining to clinical presentation and hospital course were collected. MR angiographic techniques were multislab overlapping three-dimensional time-of-flight, 2-D time-of-flight, and 2-D phase-contrast. RESULTS: Three cases of top of the basilar artery occlusion and three cases of deep cerebral vein thrombosis were recognized. In all cases, T2 hyperintensity in a vascular distribution suggested cerebral occlusive disease. Infarction involving the thalami and basal ganglia was present in two cases of deep cerebral vein thrombosis. Infarction of the thalami, mesodiencephalic region, and cerebellar hemispheres was present in two cases of basilar artery occlusion. Bithalamic infarction alone was seen in one case of deep cerebral vein thrombosis and one case of basilar artery occlusion. In the five cases in which MR angiography was used, this technique accurately distinguished the vessels involved (arterial or venous). CONCLUSION: MR angiography is a useful adjunct to MR imaging in the evaluation of bithalamic T2 hyperintensity. It does help distinguish between the two vascular causes: top of basilar artery occlusion and deep cerebral vein thrombosis.