Sodium molybdate—a possible alternate additive for sodium dichromate in the electrolytic production of sodium chlorate

Sodium dichromate is commonly used in sodium chlorate production to maintain high current efficiency; however, it is also a well documented carcinogen. To reduce the environmental impact, identification of a suitable alternative with similar buffering characteristics to dichromate and without adverse effect on the electrolytic performance of sodium chlorate production is important; sodium molybdate is a good candidate. Molybdate ion and its conjugated acid work as a buffer pair at pH 5–6, a lower and slightly narrower pH window than the typical buffer region of dichromate. Nonetheless, the molybdate buffer works effectively during the electrolytic process by maintaining pH at 5.9. Although the use of molybdate buffer will lower the overpotential of hydrogen evolution reaction (HER) by 100 mV, the average off-gas oxygen content is noticeably compromised at 3.6–4.6%, measured using a pilot cell operated at 3 kA m⁻²and 80 °C during a 3-day trial. The resulting current efficiency of 91 92% is significantly lower than when dichromate is employed as the process additive (> 96%). Mixtures of different dichromate and molybdate ratio were also investigated in terms of the resulting cathode surface potential.     

Degradation of a textile azo dye by pulsed arc discharge to the surface of wastewater

The pulsed arc discharge to the surface of wastewater was applied to the degradation of a textile azo dye (Acid Red 27). A high-voltage electrode (discharging electrode) was vertically placed above the surface of the wastewater while the wastewater itself was grounded. The pulsed arc discharge occurred between the tip of the discharging electrode and the surface of the wastewater, producing various oxidative species. Oxygen was used as the working gas instead of air to prevent nitrogen oxides from forming. The effect of several parameters on the chromaticity and chemical oxygen demand (COD) removal was examined. The results obtained showed that the chromaticity of the wastewater was completely removed by this process and the COD also decreased significantly. It has been found that ozone formed in the gas phase mainly affects the removal of the dye. The contribution of other effects such as ultraviolet light emission and OH radical formation during the arc discharge to the degradation of the dye was found to be less than 15%. For the present reactor system, the optimum pH, pulse repetition rate and agitation speed were found to be 3.0, 110 Hz and 300 rpm, respectively.     

Forward kinematic singularity avoiding design of a Schönflies motion generator by asymmetric attachment of subchains

In most of the previous studies on parallel mechanisms (PMs), architectural design mainly relying on symmetric geometry was investigated without in-depth analysis of its performance. This work demonstrates that such a symmetric geometry of multiple subchains sometimes induces a forward kinematic singularity which degrades the overall kinematic performance of PMs within the desired workspace and claims that an asymmetric attachment of those subchains on a moving platform can effectively resolve such a singularity problem. A 4-Degree-of-Freedom (DOF) PM exhibiting Schönflies motions is examined as an example device. First, its mobility analysis and kinematic modeling via screw theory are conducted. Then a singularity analysis based on Grassmann line geometric conditions is carried out, and the forward kinematic singularities of the mechanism are identified and verified by simulations. Based on these analysis and simulations, a forward kinematic singularity-free design is suggested. To show the high potential of the device in practical applications, its output stiffness and dynamic motion capability are examined. Then a prototype is built and its motions capability is verified through experiments.     

Auto-generation of IEC standard PLC code using t-MPSG

The objective of this paper is to reduce the development time of a PLC (Programmable Logic Controller) by automating the task of code generation. For this purpose, we applied t-MPSG (Timed-Message Based Part State Graph). The t-MPSG is an extended finite state automata used to model and generate an execution module for a real-time shop floor controller system. In our proposed method, t-MPSG is used to model the formal specification of the controller system that can be translated into textual structure. After the verification of the t-MPSG model, it can be used as an input to the plc-builder tool. The plc-builder tool is an extended version of a conventional MPSG simulator. It can be used to translate the textual structure of the t-MPSG into an IEC standard PLC code. Finally, the generated code can be downloaded to a PLC emulator or a PLC device for the purpose of simulation and execution. The similarity in the hierarchical structure of the t-MPSG and the IEC standard PLC program has made it convenient to transform from one form to another. Furthermore, an illustration of the methodology to auto-generate IEC standard PLC code using t-MPSG is explained with a suitable example. Recommended by Editorial Board member Young Soo Suh under the direction of Editor Jae Weon Choi. This work was partially supported by Defense Acquisition Program Administration and Agency for Defense Development under the contract (UD080042AD). Devinder Thapa is a Postdoc Research Fellow in the Department of Industrial & information systems at Ajou University, Korea. He completed his Ph.D. from Ajou University in Industrial and Information Systems Engineering. His area of research is related to manufacturing automation and intelligent decision support systems. Chang Mok Park is a Professor in the Department of Technology & Systems Management at Induk Institute of Technology. He completed his Ph.D. in 2002 from Ajou University in Industrial Engineering. His research interest is related to manufacturing optimization, discrete event system simulation and signal analysis. Sang C. Park is an Associate Professor in the Department of Industrial & Information Systems Engineering at Ajou University. He received his B.S., M.S., and Ph.D. degrees from KAIST in 1994, 1996, and 2000, respectively, all in Industrial Engineering. His research interests include geometric algorithms in CAD/CAM, process planning, engineering knowledge management, and discrete event system simulation. Gi-Nam Wang is the Head and a Professor in the Department of Industrial & Information Systems Engineering at Ajou University, Korea. He completed his Ph.D. in 1992 from Texas A&M University, in Industrial Engineering. He has worked as Visiting Professor at University of Texas at Austin during 2000–2001. His area of research is related to Intelligent Information & manufacturing systems, system integration & automation, e-Business solutions and image processing.     

Cognitive distortions and adolescent affective disorder. Validity of the CNCEQ in an inpatient sample. Children's Negative Cognitive Error Questionnaire

Despite a proliferation of recent research examining childhood and adolescent depression, the area still lags behind the adult depression field, particularly in the investigation of cognitive correlates of affective psychopathology. To advance cognitive research with youth, the Children's Negative Cognitive Error Questionnaire (CNCEQ) was developed to provide a measure of cognitive distortions or errors in children and adolescents. Yet, few studies have employed the CNCEQ and no evidence exists supporting the validity of its four component cognitive error scales. The purpose of the present study was to examine the construct validity of the CNCEQ and its constituent scales through the use of factor analysis and criterion-group comparisons. Groups of adolescent psychiatric inpatients, diagnosed as affective or disruptive disordered, completed the CNCEQ following admission. Results failed to support the implicit four-factor structure of the CNCEQ, instead suggesting the appropriateness of a single-factor solution labeled "negative thinking." Despite no diagnostic group differences on the CNCEQ total or other scale scores, affective disordered patients evinced more cognitive errors on the Overgeneralizing scale. Findings suggest that the CNCEQ in its current stage of development holds promise, yet requires refinement to produce a valid measure of cognitive functioning in youth.     

Psychosocial correlates of childhood anxiety disorders

OBJECTIVE: This study explored psychosocial and "environmental" correlates of childhood anxiety disorders. The study examined relationships among parental psychiatric symptomatology, perceived family environment, temperament, and self-competence in children with a DSM-III-R anxiety disorder. METHOD: A community sample of third through sixth graders was screened initially for symptoms of test anxiety. Those with high and low scores were administered the Anxiety Disorders Interview Schedule for Children. Three groups (childhood anxiety disorder, test-anxious only, and normal controls) were identified and compared on the psychosocial variables. RESULTS: Children with an anxiety disorder had greater impairment on the indices of perceived self-competence and temperamental flexibility than controls, with the test-anxious children showing intermediate, yet significant, levels of disturbance. There was a trend for children with an anxiety disorder to describe their families as less promoting of independence than the other groups. Finally, measures of parental psychiatric symptomatology revealed more obsessive-compulsive symptoms for the fathers of both the anxiety disorder and test-anxious children compared with controls. CONCLUSIONS: Results are consistent with previous findings suggesting the familial transmission of anxiety disorders and recent speculations regarding a relationship between behavioral inhibition, environmental control, and anxiety. Further research may isolate psychosocial and family environmental factors as instrumental treatment targets in the management of childhood anxiety disorders.     

Application of virtual reality for peritoneal dialysis exchange learning in patients with end-stage renal disease and cognitive impairment

Virtual Reality - Cognitive impairment is not uncommon in patients with end-stage renal disease and can make it more difficult for these patients to carry out peritoneal dialysis (PD) on their own....     

Isolation and characterization of a monoclonal anti-quadruplex DNA antibody from autoimmune "viable motheaten" mice

A cell line that produces an autoantibody specific for DNA quadruplex structures has been isolated and cloned from a hybridoma library derived from 3-month-old nonimmunized autoimmune, immunodeficient "viable motheaten" mice. This antibody has been tested extensively in vitro and found to bind specifically to DNA quadruplex structures formed by two biologically relevant sequence motifs. Scatchard and nonlinear regression analyses using both one- and two-site models were used to derive association constants for the antibody-DNA binding reactions. In both cases, quadruplexes had higher association constants than triplex and duplex molecules. The anti-quadruplex antibody binds to the quadruplex formed by the promoter-region-derived oligonucleotide d(CGCG4GCG) (Ka = 3.3 x 10(6) M-1), and has enhanced affinity for telomere-derived quadruplexes formed by the oligonucleotides d(TG4) and d(T2G4T2G4T2G4T2G4) (Ka = 5.38 x 10(6) and 1.66 x 10(7) M-1, respectively). The antibody binds both types of quadruplexes but has preferential affinity for the parallel four-stranded structure. In vitro radioimmunofilter binding experiments demonstrated that purified anti-DNA quadruplex antibodies from anti-quadruplex antibody-producing tissue culture supernatants have at least 10-fold higher affinity for quadruplexes than for triplex and duplex DNA structures of similar base composition and length. The antibody binds intramolecular DNA triplexes formed by d(G4T3G4T3C4) and d(C4T3G4T3G4), and the duplex d(CGCGCGCGCG)2 with an affinities of 6. 76 x 10(5), 5.59 x 10(5), and 8.26 x 10(5) M-1, respectively. Competition experiments showed that melted quadruplexes are not effective competitors for antibody binding when compared to native structures, confirming that the quadruplex is bound structure-specifically. To our knowledge, this is the first immunological reagent known to specifically recognize quadruplex structures. Subsequent sequence analysis demonstrates homologies between the antibody complementarity determining regions and sequences from Myb family telomere binding proteins, which are hypothesized to control cell aging via telomeric DNA interactions. The presence of this antibody in the autoimmune repertoire suggests a possible linkage between autoimmunity, telomeric DNA binding proteins, and aging.     

Extracting a largest redundancy-free XML storage structure from an acyclic hypergraph in polynomial time

Given a hypergraph and a set of embedded functional dependencies, we investigate the problem of determining the conditions under which we can efficiently generate redundancy-free XML storage structures with as few scheme trees as possible. Redundancy-free XML structures guarantee both economy in storage space and the absence of update anomalies, and having the least number of scheme trees requires the fewest number of joins to navigate among the data elements. We know that the general problem is intractable. The problem may still be intractable even when the hypergraph is acyclic and each hyperedge is in Boyce–Codd normal form (BCNF). As we show here, however, given an acyclic hypergraph with each hyperedge in BCNF, a polynomial-time algorithm exists that generates a largest possible redundancy-free XML storage structure. Successively generating largest possible scheme trees from among hyperedges not already included in generated scheme trees constitutes a reasonable heuristic for finding the fewest possible scheme trees. For many practical cases, this heuristic finds the set of redundancy-free XML storage structures with the fewest number of scheme trees. In addition to a correctness proof and a complexity analysis showing that the algorithm is polynomial, we also give experimental results over randomly generated but appropriately constrained hypergraphs showing empirically that the algorithm is indeed polynomial.     

S-phase fractions of breast carcinomas. Relationships to morphology, estrogen and progesterone receptors, and early recurrence

Analysis of the S-phase fractions (SPF) measured by in vitro thymidine labeling, morphological appearances, and estrogen receptor (ER) assays of primary invasive breast carcinomas demonstrated several interrelationships. Lobular, mucinous, tubular, and adenocystic carcinomas consistently had low SPF and were usually positive for ER. The same was true for the carcinomas of no special histologic type [the not otherwise specified (NOS) group of E. R. Fisher including "infiltrating ductal" and undifferentiated carcinomas] with minimal anaplasia. Medullary, atypical medullary, and morphologically unclassifiable carcinomas with marked nuclear anaplasia nearly always had high SPF and were usually negative for ER. High SPF was associated with advanced stages of carcinoma initially or with early recurrence following mastectomy.