A new technique for on-line and off-line high speed computation

A novel technique for both online and offline computation is presented. With this technique, a reconstruction analysis in elementary particle physics, otherwise prohibitively long, has been accomplished. It will be used online in an upcoming Fermilab experiment to reconstruct more than 100000 events per second and to trigger on the basis of that information. The technique delivers 40 gigaoperations per second, has a bandwidth on the order of gigabytes per second, and has a modest cost. An overview of the program, details of the system, and performance measurements are presented     

Frequency-dependence of myocardial energetics in failing human myocardium as quantified by a new method for the measurement of oxygen consumption in muscle strip preparations

Diastolic dysfunction at high heart rates may be associated with increased myocardial energy consumption. Frequency-dependent changes of isometric force and oxygen consumption (MVO2) were investigated in strip preparations from endstage failing human hearts exhibiting various degrees of diastolic dysfunction. MVO2 was determined by a new method which was validated. When stimulation rate was increased from 40 to 200 min-1 (n=7), developed force decreased from 16.5+/-4.3 to 7.9+/-2.9 mN/mm2 (P<0.01), diastolic force increased from 15.9+/-3.2 to 22.0+/-3.0 mN/mm2 (P<0.01), and total MVO2 increased from 2.6+/-0.6 to 4.7+/-0.9 ml/min/100 g (P<0.025). Resting MVO2 and resting force were 1.8+/-0.4 ml/min/100 g and 15.9+/-3.0 mN/mm2, respectively. After addition of 30 mm 2,3-butanedione monoxime (BDM) to inhibit crossbridges, resting MVO2 and resting force decreased by 46% (P<0.05) and 15% (P<0.01), respectively, indicating the presence of active force generation in unstimulated failing human myocardium. In each muscle preparation, there was a significant correlation between force-time integral (FTI) and total MVO2 (r=0.96+/-0.01). The strength of these correlations did not vary with the contribution of diastolic FTI to total FTI. The ratio of activity related MVO2 to developed FTI, an inverse index of the economy of contraction, increased depending on the rise of diastolic FTI at higher stimulation rates. In conclusion, in failing human myocardium, diastolic force development is occurring at the same energy expenditure as systolic force generation. Therefore, in muscle preparations with disturbed diastolic function economy of contraction decreases with higher stimulation rates, depending on the rise of diastolic force.     

Performance enhancement of an induction motor by secondaryimpedance control

The paper demonstrates the use of nonresistive secondary control of an induction motor to improve efficiency, power factor and torque. A mathematical algorithm is presented to predict the control requirements in terms of secondary capacitance. The required secondary capacitance is implemented by a novel electronic switching technique that effectively increases the value of the used capacitor. This overcomes the high-capacitance demand and provides a feasible solution. Experimental verification is presented in the results obtained from a small induction motor drive     

Isolation of two nitrogen-free toxins from tung kernels

Summary A procedure is described for isolating two nitrogen-free toxins from tung kernels and from press cake. Chick-feeding tests were used to determine which fraction was toxic at every separation. Both substances were highly toxic as 10-mg. doses killed 4-day old chicks. These substances were shown by chromatography on glass paper to be different and chromatography homogeneous, but also unstable. The elementary composition, hydroxyl content, saponification value, and specific rotation for the two toxins are given. One of the laboratories of the Southern Utilization Research and Development Division, Agricultural Research Service, U, S. Department of Agriculture.     

Materials balance in a tung oil mill

Summary Weights were determined and analyses made of tung fruit milled and of all products leaving the mill for two runs of about 90 tons each in a commercial mill under normal operating conditions. Dry matter, oil, and nitrogen in the fruit were satisfactorily accounted for in products leaving the mill, 101% of the oil being accounted for in each run. This showed that the methods of analysis and sampling were accurate. Losses occurred principally in particles of kernels occluded with the hulls and in the screw-press cake. Seventy-eight and 82% of the oil in the fruit was recovered as filtered oil. Repressing the filter-press cake by adding it back to the stream of ground nuts just before they entered the screw-presses was not proven to be economical as at the end of the run just as much cake was on hand, and it had as high an oil content as if no filter cake had been fed back through the screw presses. Only about half as much oil could be filtered per filtration cycle, resulting in an increase in cost of labor and a decrease in filtering capacity. The apparent oil content of the screw-press cake decreases by about 2% after four to eight days as compared to its apparent oil content at the time of pressing because of polymerization. Thus, screw-press cake samples should be analyzed for oil as soon as possible after extrusion. Both of these laboratories are maintained by the Agricultural Research Service of the U. S. Department of Agriculture.     

Video-assisted lateral intertransverse process arthrodesis. Validation of a new minimally invasive lumbar spinal fusion technique in the rabbit and nonhuman primate (rhesus) models

STUDY DESIGN: Cadaveric anatomic and in vivo survival animal studies were performed to develop a new arthrodesis technique for the lumbar spine. OBJECTIVES: To examine the feasibility, efficacy, and safety of a minimally invasive lumbar intertransverse process arthrodesis technique using an osteoinductive growth factor (rhBMP-2) delivered in a collagen sponge carrier. The technique was first developed using a rabbit model and modified for the nonhuman primate (rhesus monkey), a larger animal with the most similar bone biology to humans. SUMMARY OF BACKGROUND DATA: The morbidity of conventional posterolateral lumbar intertransverse process arthrodesis includes graft donor site morbidity; paraspinal muscle devascularization, denervation, and scarring and nonunion in up to 36% of patients. Minimally invasive anterior lumbar interbody arthrodesis techniques have been developed, but these often require a metal implant and carry risks to major vessels and development of retrograde ejaculation. A minimally invasive technique for posterolateral intertransverse process arthrodesis has not been described previously. METHODS: In Part 1, we examined seven New Zealand white rabbits and five rhesus monkeys at necropsy and during nonsurvival surgeries to determine the best access routes and to develop special instruments for video-assisted lateral intertransverse process arthrodesis. In Part 2, 38 New Zealand white rabbits underwent L4-L5 intertransverse process arthrodesis: the "OPEN" group (n = 16) underwent a standard open muscle-splitting approach using rhBMP-2 (bone morphogenetic protein) and collagen as a bone graft substitute; the "video-assisted control" group (n = 6) underwent video-assisted lateral intertransverse process arthrodesis with the collagen implant only (no growth factor); and the "video-assisted-BMP" group (n = 16) underwent video-assisted lateral intertransverse process arthrodesis with rhBMP-2 and collagen as the graft material. In Part 3, rhesus monkeys (n = 4) underwent video-assisted lateral intertransverse process arthrodesis using rhBMP-2 and collagen after laminectomy of L4-L5. RESULTS: In Part 1, we identified expedient, minimally invasive routes to the intertransverse process interval appropriate for each species: an intermuscular approach for the rabbit and a lateral, extramuscular approach for the rhesus monkey. In Part 2, all rabbits in the OPEN and video-assisted-BMP groups achieved solid intertransverse process lumbar fusions when assessed at 10 weeks. There were no neurologic impairments nor any difference between the two groups in the frequency of postoperative infection or other complications. None of the animals in the video-assisted control group showed evidence of fusion. In Part 3, exposure, decortication and grafting with rh-BMP-2 and collagen was accomplished successfully in all four monkeys through the video-assisted minimally invasive approach without complications. CONCLUSION: Video-assisted lateral intertransverse process arthrodesis is a feasible, effective, and safe method of lumbar spinal fusion in the rabbit and rhesus monkey. Use of this arthrodesis procedure will minimize the morbidity of paraspinal muscle denervation and devascularization seen with open intertransverse process fusion techniques, and the use of an osteoinductive growth factor will eliminate the problem of graft donor site morbidity and possibly increase the chances for successful fusion.     

The evitability of software patents

Responding to Kenneth Nichols' article in Computer (“The Age of Software Patents”, April 1999, pp. 25-31), the author disputes the two claims: “software patents are neither inherently good nor bad” and “software patents are here to stay.” The author thinks software patents are not impersonal technology, but rather a part of an intellectual patent system that is a social artifact. Because all social artifacts are fair game for judgments, software patents fall into that category. Not only does the author think it reasonable that an interested party examine the ethics and morality of any branch of the legal system (of which software patents and copyrights are a part), but he feels professionals in relevant areas have a social duty to do so. After exploring several arguments for software patents and copyrights, the author settles on the evitability of software patents, though he points out this does not ensure they will be avoided. However, he thinks there are good arguments for avoiding software patents for other more practical and just forms of monopoly for software