A new Thermo-viscoplastic Material Model for Finite-Element-Analysis of the Chip Formation Process

A new material model for describing the thermo-viscoplastic flow behavior of workpiece material in metal cutting is presented. In order to express the complex flow behavior which depends on the local strain, strain rate and temperature, a new methodology for sequential formulation is proposed. The material parameters which are achieved by using the flow stress data available at low strain rates are enhanced by matching the results of the experimental investigations and finite element simulations of the orthogonal cutting process. As a result, a material model which has a wide validity range of strain, strain rate and temperature is established.     

Cultured astrocytes express proteins involved in vesicular glutamate release

The objective of this study is to analyze volatile organic compound (VOC) concentrations in Taiwan's drinking water supply. Focusing on Taiwan's three major metropolitan areas--Taipei, Taichung and Kaohsiung (in the north, middle and south, respectively)--171 samples were taken from tap water and 68 from boiled water. Tests showed VOC concentrations were highest in Kaohsiung. This is due to different water sources and methods of treatment. Except for bromoform, trihalomethane (THM) concentrations were highest. Detection rates of toluene and 1,2-dichloroethane were slightly higher than other VOC compounds. VOC concentrations decreased significantly after water was boiled. THMs had a removal rate from 61% to 82%. The authors conclude that the three metropolitan areas contain significantly different levels of VOCs and that boiling can significantly reduce the presence of VOCs. Other sources of pollution that contaminate drinking water such as industrial plants and gas stations must be further investigated.     

Hyperdynamic circulation of cirrhotic rats: role of substance P and its relationship to nitric oxide

BACKGROUND: It has been suggested that excessive formation of nitric oxide (NO) is responsible for the hyperdynamic circulation observed in portal hypertension. Substance P is a neuropeptide partly cleared by the liver and causes vasodilatation through the activation of the endothelial NO pathway. However, there are no previously published data concerning the plasma level of substance P in cirrhotic rats and its relationship to NO. METHODS: Plasma concentrations of substance P and nitrate/nitrite (an index of NO production) were determined in control rats and cirrhotic rats with or without ascites using an enzyme-linked immununosorbent assay and a colorimetric assay, respectively. In addition, systemic and portal hemodynamics were evaluated by a thermodilution technique and catheterization. RESULTS: Cirrhotic rats with and without ascites had a lower systemic vascular resistance (2.6 +/- 0.2 and 3.9 +/- 0.4 mmHg ml(-1) x min x 100 g body weight, respectively) and higher portal pressure (14.6 +/- 0.6 and 11.3 +/- 1.8 mmHg) than control rats (6.5 +/- 0.3 mmHg x ml(-1) x min x 100 g BW and 6.8 +/- 0.2 mmHg, respectively, P < 0.05), and cirrhotic rats with ascites had the lowest systemic vascular resistance. Plasma levels of nitrate/nitrite progressively increased in relation to the severity of liver dysfunction (control rats, 2.7 +/- 0.5 nmol/ml; cirrhotic rats without ascites, 5.6 +/- 1.3 nmol/ml; cirrhotic rats with ascites, 8.3 +/- 2.2 nmol/ml; P < 0.05). Cirrhotic rats with ascites displayed higher plasma values of substance P (57.7 +/- 5.9 pg/ml) than cirrhotic rats without ascites (37.9 +/- 3.1 pg/ml, P < 0.05) and control rats (30.1 +/- 1.0 pg/ml, P < 0.05). There was no significant difference in plasma substance P values between control rats and cirrhotic rats without ascites (P > 0.05). No correlation was found between plasma levels of substance P and nitrate/nitrite (r = 0.318, P > 0.05). CONCLUSIONS: Excessive formation of NO may be responsible, at least partly, for the hemodynamic derangements in cirrhosis. Although substance P may not participate in the initiation of a hyperdynamic circulation in cirrhosis, it may contribute to the maintenance of the hyperdynamic circulation observed in cirrhotic rats with ascites.     

The geographic variation of cancer incidence in Ontario

OBJECTIVES: Our objectives were (1) to describe an analysis of the spatial pattern of cancer incidence in Ontario and (2) to discuss the quality of data in the Ontario Cancer Registry with respect to the accuracy of local cancer rates. METHODS: Cancer incidence rates were calculated for 22 cancer sites in 49 counties of Ontario during 1976 to 1986. Capture-recapture methods were used to estimate completeness of case registration, and completeness of residence information was also assessed. Spatial autocorrelation was used in measuring the geographic pattern of incidence rates. Comparisons were also made between sexes and with earlier data from 1966 to 1975. RESULTS: The quality of the geographic data in the registry appeared good, and corrections for incomplete or inaccurate registration had little impact. About one third of the sex-site combinations showed some evidence of spatial patterning in the cancer rate. Particularly strong regional variation was noted for cancers of the stomach, lung, uterus, and prostate. CONCLUSIONS: The analysis revealed a number of cancers with significant spatial patterning of risk. Further work is needed to relate the cancer data to other information on potential life-style and environmental factors.     

共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。     

Effects of potential and heat treatment on phase transition of alumina dielectric layer

The characteristics and growth behaviors of alumina dielectric layer formed by anodic oxidation were investigated. The aluminum oxide layer anodized at 400 V was predominantly amorphous alumina, but at the applied potentials more than 500 V, amorphous and crystalline γ-alumina were existed in anodic oxide layer and the ratio of γ-alumina increased with the increasing applied potential. During the heat treatment at 600^°C or higher temperature, amorphous alumina layer was transformed into the crystalline γ-alumina. The phase transition of anodic amorphous alumina into crystalline depends on anodic applied potentials and heat-treatment temperatures.     

Nanoporous activated carbon cloth for capacitive deionization of aqueous solution

Activated nanostructured-carbon cloths with a high ratio of surface area to volume are used as electrode for capacitive deionization. The electrochemical properties on capacitive deionization for NaCl solution have been investigated to improve efficiency of capacitive deionization properties from aqueous solution, employing chemical surface-modification by etching in alkaline and acidic solution. The removal efficiency of inorganic salts of activated carbon cloths by chemical modification significantly increased. Specially the carbon cloth surface modified in HNO₃ showed an effect of improvement in the CDI efficiency due to not only ion adsorption by an electric double layer, but also electron transfer by Faradaic reaction.     

A kinetic study on isothermal crystallization of palm oil by solid fat content measurements

Isothermal crystallization of plam oil was studied by means of differential scanning calorimetry (DSC) as well as by nuclear magnetic resonance spectrometry to monitor its solid fat content (SFC). The temperature of crystallization (Tc) varied from 0 to 30°C, depending on the method used. The plot of %SFC vs. time at 25°C was sigmoidal in shape. However, at lower temperatures, two consecutive curves were clearly visible. Results from DSC experiments showed the following interesting features. At each Tc, the crystals produced were of different compositions. From 0 to 8°C, the thermogram showed three peaks, with the first two peaks (I and II) sharp, and the third (III) rather broad. At elevated temperatures up to 20°C, peak II disappeared totally while peak III tended to shift toward peak I. Above 20°C, both peaks shifted downward to longer times. Peak I continued to be broadened, and then suddenly disappeared at Tc above 24°C. The melting thermograms of the crystals obtained above and below this cut-off point were distinctly different. Kinetic studies on isothermal crystallization based on the data of SFC measurements showed that the data fit well into the Avrami-Erofeev equation with n=3 over the first 70% of the crystallization.     

Study on Contamination Control for Yield Enhancement in the Manufacturing Line of Cellular Phone Modules

Practical studies on the method of contamination control for yield enhancement in the cellular phone modules production line were carried out. A contamination control method was proposed, consisting of data collection, data analysis, improvement action, verification, and implementation of control. The partition check method and the composition analysis for data collection and data analysis were respectively used in the cellular phone modules manufacturing process, and these methods were evaluated by the variation of yield loss before and after implementing the actions for improvement. In the partition check method, the critical process step was selected, and yield loss reduction through improvement actions was observed, whereas in the composition analysis, critical sources were selected, and yield loss reduction through improvement actions was investigated. From the results, it is concluded that the partition check and the composition analysis are effective solutions for contamination control in cleanroom production lines.