HLA-DRB1 genes and disease severity in rheumatoid arthritis. The MIRA Trial Group. Minocycline in Rheumatoid Arthritis

OBJECTIVE: To examine the effect of alleles encoding the "shared"/"rheumatoid" epitope on rheumatoid arthritis (RA) disease severity in patients who participated in the minocycline in RA (MIRA) trial. METHODS: Of 205 patients with a week-48 visit, blood was available for typing of HLA-DRB1 and HLA-DQB1 in 174 (85%) and successfully completed in 169 (82%). Baseline erosions were used to assess disease severity and new erosions at the last visit served as a proxy for progression. RESULTS: At baseline, there was no association between the presence of erosive disease or rheumatoid factor status and the dose of rheumatoid epitope (homozygous, heterozygous, none) or the specific alleles identified. At the final visit, a gradient was observed for the 3 allelic subgroups (and their gene doses) in the occurrence of new erosions among the Caucasian placebo-treated, but not the minocycline-treated, patients. A treatment group/HLA-DR4 epitope interaction was demonstrated in multivariate analyses. Approximately two-thirds of African-American patients did not have the rheumatoid epitope. CONCLUSION: HLA-DRB1 oligotyping may be useful in predicting the progression of disease in some Caucasian patients. Our study corroborates the infrequency of the epitope among African-American patients with RA.     

Perinuclear antineutrophil cytoplasmic antibodies in patients with Crohn's disease define a clinical subgroup

BACKGROUND & AIMS: Antineutrophil cytoplasmic antibodies (ANCA) have been consistently detected in a subgroup of patients with Crohn's disease (CD). This study was designed to determine whether serum ANCA expression in patients with CD characterizes an identifiable clinical subgroup. METHODS: The study population consisted of 69 consecutive patients with an established diagnosis of CD as determined by a combination of characteristic clinical, radiographic, endoscopic, and histopathologic criteria. Sera from the patients were analyzed for the presence of ANCAs using the fixed neutrophil enzyme-linked immunosorbent assay (ELISA) assay. Perinuclear ANCA (pANCA)-positive and cytoplasmic ANCA (cANCA)-positive results by ELISA were confirmed by indirect immunofluorescence staining. Clinical profiles of the ANCA-positive patients with CD were compared with those of patients with CD not expressing ANCA (ANCA-negative). RESULTS: pANCA-positive patients with CD have endoscopically and/or histopathologically documented left-sided colitis and symptoms of left-sided colonic inflammation, clinically reflected by rectal bleeding and mucus discharge, urgency, and treatment with topical agents. One hundred percent of patients with CD expressing pANCA had "UC-like" features. CONCLUSIONS: In patients with CD, serum pANCA expression characterizes a UC-like clinical phenotype. Stratification of CD by serum pANCA provides evidence of heterogeneity within CD and suggests a common intestinal mucosal inflammatory process among a definable subgroup of patients with CD and UC expressing this marker.     

Investigating haptic distance-to-break using linear and nonlinear materials in a simulated minimally invasive surgery task

Accurate detection of mediated haptic information in minimally invasive surgery (MIS) is critical for applying appropriate force magnitudes onto soft tissue with the aim of minimising tissue trauma. Force perception in MIS is a dynamic process, with surgeons’ administration of force into tissue revealing information about the remote surgical site which further informs the surgeons’ haptic interactions. The relationship between applied force and material deformation rate provides biomechanical information specifying the deformation distance remaining until a tissue will fail: which is termed distance-to-break (DTB). The current study demonstrates that observers can detect DTB while deforming simulated tissues and stop before reaching the tissues’ failure points. The design of training simulators, control devices and automated robotic systems for applications outside of MIS is discussed.

Practitioner Summary: In MIS, haptic information is critical for applying appropriate forces onto soft tissue to minimise tissue trauma. Observers used force information to detect how far they could deform a virtual tissue before it would break. The design of training simulators, control devices and automated robotic systems is discussed.     

Utilizing identity-by-descent probabilities for genetic fine-mapping in population based samples, via spatial smoothing of haplotype effects

Genetic fine mapping can be performed by exploiting the notion that haplotypes that are structurally similar in the neighbourhood of a disease predisposing locus are more likely to harbour the same susceptibility allele. Within the framework of Generalized Linear Mixed Models this can be formalized using spatial smoothing models, i.e. inducing a covariance structure for the haplotype risk parameters, such that risks associated with structurally similar haplotypes are dependent. In a Bayesian procedure a local similarity measure is calculated for each update of the presumed disease locus. Thus, the disease locus is searched as the place where the similarity structure produces risk parameters that can best discriminate between cases and controls.From a population genetic perspective the use of an identity-by-descent based similarity metric is theoretically motivated. This approach is then compared to other more intuitively motivated models and other similarity measures based on identity-by-state, suggested in the literature.     

Wall Smoke Deposition from a Hot Smoke Layer

Smoke deposition from a hot smoke layer onto wall surfaces was studied in a hood apparatus using polymethylmethacrylate, polypropylene, and gasoline as fuels. Based upon prior analysis by Butler and Mulholland, the smoke deposition was expected to be dominated by thermophoresis. The deposited smoke samples were collected on glass filter paper attached to the hood wall and the mass per unit area of smoke deposited was measured gravimetrically. Measurements were made of quantities required for the prediction of thermophoretic smoke deposition. The smoke deposition measured in the experimental program was well predicted by the thermophoretic smoke deposition equation. The thermophoretic smoke deposition equation was found to be suitable for predicting smoke deposition onto wall surfaces exposed to fire environments.     

HPLC determination of polycyclic aromatic hydrocarbons (PAHs) in the littoral urban sewage area of cortiou (Marseille,France)

A selective method for determining polycyclic aromatic hydrocarbons (PAHs) in sediments using solid‐phase extraction and RP‐HPLC with fluorescence and UV detection is described. The complete analytical method is used to surface sediments from the creek of Cortiou (France). Sewage from the urban area of Marseille is delivered to the creek. PAH levels in sediments (µg/g) range between 2.251 µg/g (for the benzo(a)anthracene) and 相似文献   

Allocation of assembly tolerances to minimize costs

The cost and quality of an assembly depend on the processes used to manufacture its components. The specific processes and process settings are often dictated by the tolerances on the components. One long-standing challenge is allocating the assembly tolerance to components. Many methods have been proposed, most of which endeavor to minimize cost. We propose a tolerance allocation method that minimizes cost by jointly considering process variation and tolerance specifications. A cost model including processing cost, scrap cost, and quality loss is employed. The cost is minimized by a heuristic strategy. An overrunning clutch assembly case study is used to evaluate the method.     

Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells

Thin‐film solar cells consisting of earth‐abundant and non‐toxic materials were made from pulsed chemical vapor deposition (pulsed‐CVD) of SnS as the p‐type absorber layer and atomic layer deposition (ALD) of Zn(O,S) as the n‐type buffer layer. The effects of deposition temperature and annealing conditions of the SnS absorber layer were studied for solar cells with a structure of Mo/SnS/Zn(O,S)/ZnO/ITO. Solar cells were further optimized by varying the stoichiometry of Zn(O,S) and the annealing conditions of SnS. Post‐deposition annealing in pure hydrogen sulfide improved crystallinity and increased the carrier mobility by one order of magnitude, and a power conversion efficiency up to 2.9% was achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

Cellulose/acrylic acid copolymer blends for films and coating applications

Enzymatically treated cellulose was dissolved in a NaOH/ZnO solvent system and mixed together with poly(ethylene‐co‐acrylic acid) (PE‐co‐AA) or poly(acrylamide‐co‐acrylic acid) (PAA‐co‐AA) polymers, in order to improve the properties of dissolved cellulose and to prepare homogeneous cellulose‐based blends for films and coatings. The solution stage properties of the blends were evaluated by rheological methods and the precipitated dry blends were characterized by dynamic mechanical analysis, differential scanning calorimetry, and scanning electron microscopy. Paperboard coating tests done at laboratory scale showed dissolved cellulose/acrylic acid copolymer‐based blends function well as coating materials. All of the tested blends showed a good resistance against grease in the coating trials, having grease resistance from 60 to 69 days despite a very thin (～2 µm) coating layer. In addition, cellulose/PE‐co‐AA coating showed improved water vapor and oxygen barrier properties when compared with neat dissolved cellulose‐coated paperboard. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40286.