火成岩储层测井评价进展综述

十多年来,国内外火成岩储层测井评价已从交会图定性分析发展到用岩心分析资料建立裂缝性储层的测井解释模型，半定量、定量评价裂缝。成像测井和核磁测井的纵、横向分辨率高，经过地质刻度，可以较精细地识别岩性和裂缝，在解释火成岩方面有良好的效果。提高岩性识别准确率，识别复杂火成岩储层和孔隙流体，以及综合评价火成岩储层裂缝、饱和度等参数，仍然是火成岩储层测井评价所面临的难题。加强岩石物理基础实验，研究火成岩储层导电机理，系统研究火成岩储层测井评价理论，推广测井新技术在火成岩中的应用，建立统一的测井评价方法，将成为火成岩储层测井评价的发展趋势。     

Ripple: a wireless token-passing protocol for multi-hop wireless mesh networks

This work presents a wireless token-passing protocol, named Ripple, for wireless mesh networks (WMNs). In contrast to existing random-access approaches, Ripple uses a decentralized controlled-access approach to protect nodes from unintentional packet collisions and maximize the spatial reuse. The performance of Ripple under an error-free wireless channel was investigated and the accuracy of the analysis was verified by simulation. Simulation results also indicated that Ripple achieved throughput, stability, and QoS enhancement than that of 802.11 DCF under a highly loaded situation.     

WDM网络光层保护新算法的探讨

首先介绍了几种按照不同标准划分的WDM网络光层保护方法,然后提出了三种实现光层保护的新算法,对它们的内容和性能做了详细描述。按照提出的算法所求得的解,可以为WDM网络提供新的光层保护方式。     

纸浆漂白废水中有机氯化物的排放与控制

本文概述了纸浆漂白废水的特性，以及影响其有机氯化物发生量的因素。     

基于TC8830AF的智能语音卡结构与设计

本文描述一种基于８０３１单片机和ＴＣ８８３０ＡＦ语音处理器的ＰＣ机智能语音卡，通过软硬件设计解决了ＰＣ－８０３１－ＴＣ８８３０ＡＦ结构中的通讯问题。该语音卡在进行语音的合成、编辑和播放时，仅占用极少的ＰＣ机ＣＰＵ处理时间，能满足计算机系统进行实时语音合成的要求。     

Effects of a K+ATP channel opener, lemakalim, on systemic, coronary and regional vascular dynamics in conscious dogs: comparison with nifedipine, adenosine, nitroglycerin and acetylcholine

The systemic, coronary and regional vascular responses to the K+ATP channel opener lemakalim were compared to other potent vasodilators (i.e., nifedipine, adenosine, nitroglycerin and acetylcholine). Experiments were performed in 12 conscious dogs 2 to 4 weeks after implantation of aortic catheters and flow probes on the ascending aorta, left circumflex coronary, celiac, mesenteric, renal and iliac arteries, and solid-state miniature pressure gauges in the left ventricular cavity. Dose-response curves induced by bolus injection (i.v.) were examined. For doses that reduced total peripheral resistance by 22%, lemakalim reduced celiac (-28 +/- 2%), mesenteric (-24 +/- 3%), renal (-17 +/- 3%) and iliac (-18 +/- 3%) vascular resistances (i.e., by amounts similar to those observed with the other vasodilators, except for adenosine, which increased renal resistance). At these doses, lemakalim induced a greater decrease (-52 +/- 3%) (P < .05) in coronary resistance, as compared with nifedipine (-35 +/- 3%), adenosine (-38 +/- 3%), nitroglycerin (-25 +/- 2%) and acetylcholine (-32 +/- 3%). However, when near maximal vasodilation was elicited, adenosine elicited the greatest (P < .05) decrease in coronary resistance (-81 +/- 1%), as compared with lemakalim (-74 +/- 2%), nifedipine (-67 +/- 2%), nitroglycerin (-63 +/- 2%) and acetylcholine (-72 +/- 1%). Both the time to maximal increases in regional blood flow and the time for recovery in all vascular beds were significantly prolonged for lemakalim compared with the other vasodilators. Thus, the K+ATP channel opener lemakalim dilates the coronary bed out of proportion to other vascular beds, is relatively more potent at lower doses than other vasodilators and exhibits a delayed and more prolonged action in all regional vascular beds.     

High-frequency small signal AC and noise modeling of MOSFETs for RFIC design

High-frequency (HF) AC and noise modeling of MOSFETs for radio frequency (RF) integrated circuit (IC) design is discussed. A subcircuit RF model incorporating the HF effects of parasitics is presented. This model is compared with the measured data for both y parameter and f_T characteristics. Good model accuracy is achieved against measurements for a 0.25 μm RF CMOS technology. The HF noise predictivity of the model is also examined with measured data. Furthermore, a methodology to extract the channel thermal noise of MOSFETs from HF noise measurements is presented. By using the extracted channel thermal noise, any thermal noise models can be verified directly. Several noise models including the RF model discussed in this paper have been examined, and the results show that the RF model can predict the channel thermal noise better than the other models     

Fabrication of 1.55 μm VCSELs on Si using metallic bonding

Using AuGeNiCr multilayered metals as the wafer bonding medium, long-wavelength GaInAsP/InP vertical cavity surface emitting lasers employing Al-oxide/Si as the upper and lower distributed Bragg reflectors were fabricated on Si substrate with the bonding interface formed outside the vertical cavity surface emitting laser cavity. Laser emission at 1.545 μm was measured under pulsed operations near room temperature. The low-temperature metallic bonding process demonstrates a great potential in device fabrication