The cationic polymerization of α-methylstyrene in liquid sulfur dioxide initiated by the HI/I2 system

The polymerization of α-methylstyrene (αMeSty) initiated by HI/I₂ or HI in the presence of liquid sulfur dioxide has been investigated. The number-average molecular weight increased with the monomer concentration for reactions initiated by the HI/I₂ system. I₂ also participates in the initiation process, increasing the number-average polymer chain at higher monomer concentration. HI alone is also able to initiate the polymerization of αMeSty in the presence of SO₂. With this initiator, transfer reaction can be minimized in systems containing low amount of SO₂. Received: 19 December 1996/Revised: 27 January 1997/Accepted 29 January 1997     

The effect of H2 treatment on the activity of activated carbon for the oxidation of organic contaminants in water and the H2O2 decomposition

In this work, hydrogen peroxide reactions, i.e. H₂O₂ decomposition and oxidation of organics in aqueous medium, were studied in the presence of activated carbon. It was observed that the carbon pre-treatment with H₂ at 300, 500, 700 and 800 °C resulted in an increase in activity for both reactions. The carbons were characterized by BET nitrogen adsorption, thermogravimetric analyses (TG), temperature programmed reduction (TPR), electron paramagnetic resonance (EPR), iodometric titration and determination of the acid/basic sites. TPR experiments showed that activated carbon reacts with H₂ at temperatures higher than 400 °C. The treatment produces a slight increase in the surface area. EPR analyses indicate the absence of unpaired electrons in the carbon. Iodometric titrations and TG analyses suggested that the treatment with H₂ generates reduction sites in the carbon structure, with concentration of approximately 0.33, 0.53, 0.59, 0.65 and 0.60 mmol/g for carbons treated at 25, 300, 500, 700 and 800 °C, respectively. It was also observed the appearance of basic sites which might be related to the reduction sites. It is proposed that these reducing sites in the carbon can activate H₂O₂ to generate HO^* radicals which can lead to two competitive reactions, i.e. the hydrogen peroxide decomposition or the oxidation of organics in water.     

Relationship between crystalline structure and mechanical behavior in isotropic and oriented polyamide 6

Polyamide 6 (PA6) isotropic films and oriented cables were prepared by compression molding or by consecutive extrusion and cold‐drawing. These samples were isothermally annealed in the 120–200°C range and were then subjected to tensile tests at room temperature. Synchrotron wide‐angle X‐ray scattering (WAXS) and small‐angle X‐ray scattering (SAXS) patterns were obtained before and after mechanical failure. These data were related with the mechanical properties of the respective PA6 samples. The annealing of isotropic PA6 resulted in an increase in the Young's modulus (E) and yield stress (σ_y) values, which was attributed to the observed proportional reduction of the d‐spacings of the intersheet distances in both the α‐PA6 and γ‐PA6 polymorphs. Analysis of the WAXS and SAXS patterns of isotropic PA6 after break allowed the supposition of structural changes in the amorphous phase, with these being better pronounced with increasing annealing temperature; this made the samples less ductile. In oriented PA6 samples, annealing resulted in a drastic increase in the E and σ_y values accompanied by a phase transition from γ‐PA6 to α‐PA6 and a well‐pronounced reduction in the intersheet distances of both polymorphs. The stretching of the oriented samples led to an additional γ‐to‐α transition, whose extent was also related to structural changes in the amorphous phase. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2242–2252, 2007     

The Influence of the Acid Sites on the Methylamines Synthesis with Cu-HZSM-5 Zeolite

There is a high industrial demand for MMA and DMA, however, the production of TMA is favored with the commercial catalysts. This work tested the methanol amination reaction with HZSM-5 and Cu/HZSM-5 zeolites (%Cu = 1.2, 3.7 and 6.0). Regarding the MMA selectivity, light differences were observed among Cu/HZSM-5 catalysts and pure zeolite, although the catalysts containing 3.7% copper was slightly more selective to MMA than the other metallic catalysts studied. From these results it is suggested that the metal loading present in the catalysts leads to a modification in the nature of the acidic sites, in particular, the selectivity depends on ratio Brönsted/Lewis acid sites. This modifications would facilitate the amines desorption during the reaction.     

Electrochemical behavior of the Ti–6Al–4V alloy coated with a-C:H films

In this work diamond-like carbon films were deposited on the Ti–6Al–4V alloy, which has been used in aeronautics and biomedical fields, by electrical discharges using a magnetron cathode and a 99.999% graphite target in two different atmospheres, the first one constituted by argon and hydrogen and the second one by argon and methane. Films deposited using the argon/hydrogen mixture were called a-C:H, while films deposited using the argon/methane mixture were called DLC. Raman spectroscopy was used to study the structure of the films. The Raman spectra profile of the a-C:H films is quite different from that of the DLC films. The disorder degree of the graphite crystalline phase in a-C:H films is higher than in DLC films (a-C:H films present small values for the the I_D/I_G ratio). Potentiodynamic corrosion tests in 0.5 mol l⁻¹ NaCl aqueous solution, pH 5.8, at room temperature (≈25 °C) were carried out as for the a-C:H as for the DLC coated surfaces. Comparison between the corrosion parameters of a-C:H and DLC coated surfaces under similar deposition time, showed that DLC coated surfaces present bigger corrosion potential (E_corr) and polarization resistance than those coated with a-C:H films. Electrochemical impedance spectroscopy (EIS) was also used to study the electrochemical behavior of a-C:H and DLC coated surfaces exposed to 0.5 mol l⁻¹ aqueous solution. The EIS results were simulated with equivalent electrical circuit models for porous films. The results of these simulations showed similar tendency to the one observed in the potentiodynamic corrosion tests. The DLC film resistance and the charge transfer resistance (R_ct) for the DLC coated surface/electrolyte interface were bigger than the ones determined for the a-C:H coated surfaces.     

LRCN-RetailNet: A recurrent neural network architecture for accurate people counting

Multimedia Tools and Applications - Measuring and analyzing the flow of customers in retail stores is essential for a retailer to better comprehend customers’ behavior and support...     

Optimizing the use of dry cutting in rough turning steel operations

The main objective of using cutting fluids in machining operations is the reduction of temperature in the cutting region to increase tool life. However, the advantages offered by cutting fluids have been strongly debated because of their negative effects on the economic aspect, the environment and the health of workers using them. A trend to solve these problems is cutting without fluid, a method named dry cutting, which has been made possible due to technological innovations. This work aims to seek conditions in which dry cutting is satisfactory compared with the flood of fluid (called here wet cutting) usually used. Aiming at this goal, several experiments were carried out varying parameters such as cutting speed, feed, depth of cut and tool material in rough turning of ABNT 1045 steel in dry and wet cutting. The analysis of the results showed that wet turning is, as expected, better for tool life. The second conclusion is that dry cutting cannot be used with large depth of cut. But the main conclusion is that, if the tool material is changed to a more wear resistant one, dry cutting can be used with results very similar to those obtained with a flood of fluid.     

Production and characterization of Si-N films obtained by r.f. magnetron sputtering

Si-N films were deposited by sputtering from an Si₃N₄ target with different deposition pressures and negative substrate bias. The films were amorphous and showed a “featureless” morphology. A high oxygen content was detected in unbiased films. For these films the Si/N ratio was very high compared with the target composition, whereas for biased films the opposite was observed. Si-N films presented cohesive failures for loads as high as 21 N and adhesive failure at 45 N when they were analysed by scratch test. Very high hardness (45 GPa) was obtained, particularly for biased films. Unbiased films were softer, which is attributed to the formation of silicon oxide and/or to a lower compressive stress level.     

A linear algebra approach to OLAP

Inspired by the relational algebra of data processing, this paper addresses the foundations of data analytical processing from a linear algebra perspective. The paper investigates, in particular, how aggregation operations such as cross tabulations and data cubes essential to quantitative analysis of data can be expressed solely in terms of matrix multiplication, transposition and the Khatri–Rao variant of the Kronecker product. The approach offers a basis for deriving an algebraic theory of data consolidation, handling the quantitative as well as qualitative sides of data science in a natural, elegant and typed way. It also shows potential for parallel analytical processing, as the parallelization theory of such matrix operations is well acknowledged.