A highly sensitive ultraviolet sensor based on a facile in situ solution-grown ZnO nanorod/graphene heterostructure

The weak photon absorption and fast carrier kinetics of graphene limit its application in photodetection. This limitation can be overcome by introducing photosensitive nanostructures to graphene. Herein we report the synthesis of a ZnO nanorod/graphene heterostructure by a facile in situ solution growth method. By combining the attributes of photosensitive ZnO nanorods and highly conductive graphene, we for the first time demonstrate a highly sensitive visible-blind ultraviolet (UV) sensor based on graphene related heterostructure. The photoresponsibility of the UV sensor can reach 22.7 A W(-1), which is over 45,000 fold higher than that of single graphene sheet based photodetectors.     

An amphiphilic conjugate approach toward the design and synthesis of betulinic acid-polyphenol conjugates as inhibitors of the HIV-1 gp41 fusion core formation

Exploration of potent inhibitors of the HIV-1 gp41 fusion core formation is a promising strategy to discover small-molecule HIV-1 entry inhibitors for the treatment of HIV-1 infection. In this paper, a series of novel betulinic acid-polyphenol conjugates was designed, guided by molecular modeling of the binding of betulinic acid (BA) and phenolic galloyl/caffeoyl groups in the groove on the gp41 N-terminal heptad repeat (NHR) trimeric coiled coil. These conjugates were synthesized via conjugation of galloyl and caffeoyl groups with BA at the C-28 position. Their inhibitory activities of HIV gp41 six-helix bundle (6-HB) formation between the NHR peptide N36 and the C-terminal heptad repeat (CHR) peptide C34 were evaluated with size-exclusion HPLC. Conjugates bearing a galloyl group were found to exhibit four to sixfold higher inhibitory activities than that of parent compound BA, suggesting that they may be exploitable as HIV-1 fusion/entry inhibitors targeting gp41. The docking study on BA and its derivatives suggests that hydrophobic and hydrogen-bonding pockets exist in the groove of the gp41 NHR trimeric coiled coil and that a potent inhibitor should have amphiphilic structures to cooperatively interact with both pockets. This possibility was explored by incorporating both lipophilic and hydrophilic groups into the conjugates in a well-defined orientation to bind with both pockets in the gp41 NHR-trimer.     

The formation of β‐polypropylene crystals in a compatibilized blend of isotactic polypropylene and polyamide‐6

Compatibilized polypropylene (PP)/polyamide (PA6) blends with and without β nucleating agent (β‐NA) are prepared, and are designated as Blend‐0.3 and Blend‐0, respectively. The melting and crystallization characteristic of the blends crystallized under different cooling rates and different crystallization temperatures are studied. It is observed that high β‐PP content can be developed in Blend‐0.3 only at slow cooling rates (<5°C/min), whereas high α‐PP content is formed at fast cooling rates. Isothermal crystallization analysis of Blend‐0 indicates that PA6 is an effective NA for α‐PP in the lower temperature range, whereas the α‐nucleating effect disappears in the higher temperature range. Blend‐0.3 can, therefore, be viewed as a system containing both α‐ and β‐NAs, simultaneously. PA6 is competing with β‐NA in inducing PP crystallization. Under the normal injection of Blend‐0.3, the melt will be cooled through the higher temperature that favors the effectiveness of β‐NA rapidly because of the faster cooling rate. However, the α‐nucleation effect from PA6 predominate at the lower temperature. This explains the difficulty in obtaining high β‐PP content in Blend‐0.3 from injection molding. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Characterization of Aluminum Nanopowder Compositions

The thermal behaviour of two different Al nanopowders and a micron‐sized Al powder was studied using DSC, simultaneous TG‐DTA, and accelerating rate calorimetry (ARC). The results show that the reactivity of Al powder increases as the particle size decreases. The thermal stability of the smaller Al nanopowder (Als) in water and in a humid atmosphere was determined using ARC and TG‐DTA, respectively. Atomic Absorption Spectrometry (AAS), X‐Ray Photoelectron Spectrometry (XPS) and Auger Electron Spectrometry (AES) were used to characterize the surface chemistry of Alex. The outgassing behaviour for mixtures of RDX and the various Al powders was investigated using TG‐DTA‐FTIR‐MS. Evolution of NO₂ and N₂O from a chemical interaction between Al nanopowders and RDX was observed. The effect of Als and Alex on the thermal stability of TNT, RDX, Comp B, and AP was determined using ARC. Addition of Als significantly lowered the onset temperature for TNT and RDX decomposition. Electrostatic discharge (ESD) sensitivities of Al nanopowders and their mixtures with TNT, Comp B, RDX and AP were determined. The results show that the AP/Als mixture is very sensitive to ESD. Standard dust explosibility tests demonstrated that Alex is highly explosible.     

Quantitative prediction of the degree of pollution of effluent from reactive dye mixtures

By using mathematical formulae developed in previous studies, certain pollution parameters of dye effluent obtained from reactive dyeing with a single dye can be predicted with good accuracy. In this study, the degree of pollution of reactive dyeing effluent using dye mixtures was also predicted by other approaches, such as linear and non-linear regression. The prediction accuracy was found to be satisfactory.     

物理气相沉积硬质涂层的开发及工程应用

概述了物理气相沉积(PVD)技术的发展过程、特点及工程应用。介绍了香港城市大学先进涂层应用研究实验室(ACARL)近10年来在硬质涂层的开发与应用方面所做的主要工作,包括金刚石薄膜和纳米复合涂层在香港制造业的应用研究,超硬纳米复合涂层的完整性和可靠性研究,以及以脉冲磁控溅射为基础的新型大面积涂层技术的开发和工业化应用研究等。     

An Amphiphilic BODIPY‐Porphyrin Conjugate: Intense Two‐Photon Absorption and Rapid Cellular Uptake for Two‐Photon‐Induced Imaging and Photodynamic Therapy

The new amphiphilic BODPY‐porphyrin conjugate BZnPP and its precursor BZnPH were synthesised, and their linear and two‐photon photophysical properties, together with their cellular uptake and photo‐cytotoxicity, were studied. This amphiphilic conjugate consists of a hydrophobic BODIPY moiety and a hydrophilic tetra(ethylene glycol) chain bridging a cationic triphenylphosphonium group to an amphiphilic porphyrin ZnP through acetylide linkers at its meso positions. A large two‐photon absorption cross‐section (σ=1725 GM) and a high singlet oxygen quantum yield (0.52) were recorded. Intense linear‐ and two‐photon‐induced red emissions were also observed for both BZnPP and BZnPH. Further in vitro studies showed that BZnPP exhibited very efficient cellular uptake and strong photocytotoxic but weak dark cytotoxic properties towards human breast carcinoma MCF‐7 cells. In summary, the two‐photon‐induced emission and the potent photo‐cytotoxicity of BZnPP make it an efficacious dual‐purpose tumour‐imaging and photodynamic therapeutic agent in the tissue‐transparent spectral windows.     

Coexistence of three ferroelectric phases and enhanced piezoelectric properties in BaTiO3–CaHfO3 lead-free ceramics

Perovskite ferroelectrics possess the fascinating piezoelectric properties near a morphotropic phase boundary, attributing to a low energy barrier that the results in structural instability and easy polarization rotation. In this work, a new lead-free system of (1-x)BaTiO₃-xCaHfO₃ was designed, and characterized by a coexistence of ferroelectric rhombohedral-orthorhombic-tetragonal (R-O-T) phases. With the increase amount of CaHfO₃ (x), a stable coexistence region of three ferroelectric phases (R-O-T) exists at 0.06 ≤ x ≤ 0.08. Both large piezoelectric coefficient (d₃₃～400 pC/N), inverse piezoelectric coefficient (d₃₃^*～547 pm/V) and planar electromechanical coupling factor (k_p～58.2%) can be achieved for the composition with x = 0.08 near the coexistence of three ferroelectric phases. Our results show that the materials with the composition located at a region where the three ferroelectric R-O-T phases coexist would have the lowest energy barrier and thus greatly promote the polarization rotation, resulting in a strong piezoelectric response.     

A feedback glucose control strategy for type II diabetes mellitus based on fuzzy logic

Most patients with severe Type II diabetes mellitus, characterised by both insulin resistance and β‐cell failure, eventually require insulin therapy. According to the nonlinear dynamics of homeostasis of blood glucose, proportional‐integral (PI) controller, modified by penalising the feedback error using a fuzzy inference system has been developed to maintain normoglycaemia in a simulated patient using a closed‐loop insulin infusion pump. The simulation employs a compartment model proposed by Vahidi et al. [Vahidi et al., Biochem. Eng. J. 2011, 55(1), 7–16]. The results demonstrate that the fuzzy‐based PI controller is superior to a conventional PI controller for the regulation of blood glucose by insulin infusion for Type II diabetic patients. © 2012 Canadian Society for Chemical Engineering     

Nanoencapsulation of montmorillonite clay within poly(ethylene glycol) nanobeads by electrospraying

The present study describes the preparation and characterization of a novel nanocomposite, based on montmorillonite clay (MMT) encapsulation in poly(ethylene glycol) (PEG) by an electrospraying process. PEG/MMT nanocomposites with MMT contents ranging from 1 to 5 wt % were successfully prepared and characterized in relation to their morphological, spectroscopic, structural, and thermal properties. Scanning electron microscopy, transmission electron microscopy, and atomic force microscopy micrographs showed that the PEG nanobeads formed spherical shapes, and with increasing amount of MMT clay, the size of the beads decreased significantly, ranging from 120 to 3.7 nm. The Fourier transform infrared spectroscopy results suggested that there was no significant chemical interaction between PEG and MMT clay. However, the d‐spacing of MMT clay in PEG/MMT increased, a clear indication of the intercalation of PEG in the interlayer spaces of MMT clay. Furthermore, the thermal stability of PEG polymer decreased upon encapsulation of MMT clay in PEG/MMT composites. Nanoindentation results showed that the hardness and Young's modulus of the PEG/MMT composites increased with 3 wt % loading of MMT. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45048.