人血清白蛋白对模拟宫腔液中铜的光电响应特性的影响

用动电位伏安法，动电位光电流测量，表面膜的阴极还原和XRD分析等手段研究了铜在含或不含人血清白蛋白的模拟宫腔液（pH=7)中的电化学和光电化学行为，在不含白蛋白的模拟宫腔液中，铜电极表面生成的Cu2O呈n型光响应；一定量白蛋白存在时使Cu2O的光响应从n型转为p型，Cu2O在模拟宫腔液中呈n型光响应可归因于氯离子对Cu2O的掺杂，白蛋白排斥氯离子对Cu2O的掺杂，使其光响应从n型转为p型。     

活性炭吸附法分离铼钼的研究

介绍了活性炭吸附法分离铼和钼 ,实验表明调整吸附液的pH值能使铼钼有效分离 ,当pH >8.2时 ,分离系数SRe Mo　　 >3 0 42 ,铼的吸附符合Freundlich等温式。     

Biosorption behaviors of Cu, Zn, Cd and mixture by waste activated sludge

Biosorption of heavy metal ions, such as Cu²⁺, Cd²⁺ and Zn²⁺, was carried out using waste activated sludge from municipal sewage treatment plant as adsorption material, and the effects of parameters, such as pH value, temperature, reaction time and sorption duration, were studied in detail. The results indicate that the removal rates of Cu²⁺, Zn²⁺ and Cd²⁺ with low concentration are 96.47%, 80% and 90%, respectively, adsorbed by waste activated sludge. Little effect of dosage of activated sludge on the adsorption of Cu²⁺ and more effects on the adsorption of Zn²⁺ and Cd²⁺ are observed. Little effect of temperature is observed, while pH value and adsorption time exert important influence on the sorption process. The adsorption behaviors of heavy metal ions all have parabolic relationships with pH value. The optimum pH value is between 6 and 10, and the optimum adsorption time is 1 h. In single heavy metal ion system, the sorption processes of Cu²⁺, Zn²⁺ and Cd²⁺ are in accordance with Freundlich model, which indicates that it is suitable for the treatment of these three heavy metal ions using intermittent operation. In addition, the sorption capacity of the sludge for Cu²⁺ is preferential to the other two ions.     

非线性滤波在射线图像降噪增强中的应用

射线数字成像是当前射线检测与诊断技术发展的方向，图像降噪增强是提高射线成像检测灵敏度和分辨力的关键。重点探讨以排序滤波为代表的非线性滤波图像降噪增强方法，对射线图像的处理表明，线性滤波在降噪的同时会引起较大的边级模糊，而排序滤波不仅降低噪声且能保持图像细节，提高图像质量效果明显。     

（LPCCa）2（MgNi）17合金的吸放氢性能

研究了用部分Ca取代LPC（LPC为无钕镧镨铈混合稀土金属），同时用部分Ni取代Mg的（LPCCa）2（MgNi）17合金的吸放氢性能。比较了不同温度下，不同成分配比对合金贮氢性能的影响。其中，（LPC）1.9Ca0.1Mg15Ni2合金具有相对较低的放氢温度和较大的放氢节，住275℃的放氢量达3．43％（质量分数）。分析了（LPC）1.9Ca0.1Mg15Ni2的微观结构，同时对合金放氢温度降低的原冈进行了讨论。     

两坐标数控立式铣削欠切现象及其防止

在两坐标数控立铣削加工中,欠切是常见的异常加工现象,严重的影响了加工质量及加工效率。文中将欠切现象归纳为工艺系统引起的欠切、数控系统功能引起的欠切、工艺安排及编程引起的欠切三个大类,分析了十五种主要欠切形成的原因,并提出了控制欠切的措施。     

镍基合金激光直接制造的显微组织与缺陷分析

采用FGH95镍基高温合金粉末进行激光直接制造工艺实验，研究了不同工艺参数对表面形貌、显微组织和显微硬度的影响。结果表明，成形件表面平整无变形，显微组织为细小而致密的柱状晶。有层内生长和外延式生长两种生长方式。同时对其中出现的缺陷也作了研究分析，得到了优化的工艺参数。     

Progress in flotation de-silica

1　INTRODUCTIONBayer sprocessisatypicalmethodtoproducea luminumoxidefrombauxite .Forthediasporic baux ite ,theBayer sprocesscaneconomicallyproducealu minumoxideonlywhenthemassratioofAl2 O3toSiO2 >10 .However ,inChina ,thealuminumoxidewasmainlyproducedbyusing“sinteringprocess”or“in parallelBayer sinteringcombination process”technologiesbecausethediasporic bauxiteischarac terizedbyhighcontentofaluminumoxideandsilicabutlowAl2 O3/SiO2 (average 5 6 ) .Thesetwotech nologieshavetheproble…     

Studies on Preparation of Onion-like Fullerenes by Vacuum Heat-treatment

Onion-like Fullerenes were produced at high-temperature in vacuum. The morphology of the carbon nano onion-like fullerenes was examined and characterized by high-resolution transmission electron microscopy (HRTEM). It can be seen that the nano-sized, onion-like fullerenes possess high degree of graphization. The results suggested that the catalyst is the main factor affecting the size and yield of the fullerenes. The method is very promising for simple mass production.