Design and practical implementation of multifrequency RF front ends using direct RF sampling

The use of direct RF sampling has been explored as a means of designing multifrequency RF front ends. Such front ends will be useful to multifrequency RF applications such as global navigation satellite system receivers that use global positioning system (GPS) L1, L2, and L5 signals and Galileo signals. The design of a practical multifrequency direct RF sampling front end is dependent on having an analog-to-digital converter whose input bandwidth accommodates the highest carrier frequency and whose maximum sampling frequency is more than twice the cumulative bandwidth about the multiple carrier signals. The principle of direct RF sampling is used to alias all frequency bands of interest onto portions of the Nyquist bandwidth that do not overlap. This paper presents a new algorithm that finds the minimum sampling frequency that avoids overlap. This design approach requires a multifrequency bandpass filter for the frequency bands of interest. A prototype front end has been designed, built, and tested. It receives a GPS coarse/acquisition code at the L1 frequency and GPS antispoofing precision code at both L1 and L2. Dual-frequency signals with received carrier-to-noise ratios in excess of 52 dB-Hz have been acquired and tracked using this system.     

The relationship between photo-catalytic performance and optical property over Si-incorporated TiO2

This study focuses on the relationship between photo-catalytic performance and optical property over Si-incorporated TiO₂. The Si-incorporated TiO₂ particles exhibited a pure structure of anatase having a particle size of less than 20 nm and surface area of more than 190 m²/g. The absorbance did not shift to a higher wavelength in spite of the incorporation of the Si ions, but the intensity of the photoluminescence (PL) curve was the smallest in the case of the 2.0 mol% Si-TiO₂, which was related to the recombination between the excited electrons and holes. Based on these results, the photodecomposition of methyl orange in the liquid reaction was enhanced over the 2.0 mol% Si-incorporated TiO₂ compared with that over pure TiO₂: Methyl orange at 10.0 ppm was completely decomposed after 100 min when 1.0 g of the 2.0 mol% Si-incorporated TiO₂ was used.     

Sequential batch reactor for eucalypt kraft pulp effluent treatment with Trametes versicolor

BACKGROUND: A sequential batch reactor (SBR) was used for eucalypt kraft pulp effluent treatment with Trametes versicolor. A 2³ full factorial design and response surface methodology were applied to optimise the batch fermentation conditions. Effluent concentration, culture medium and inoculum age were the factors selected for this study in order to optimise the reduction of chemical oxygen demand (COD). RESULTS: The presence of Trametes Defined Medium (TDM) in the fermentation was required to obtain a significant COD reduction. Experiments in the batch reactor confirmed, in general, the predicted results of optimisation developed from Erlenmeyer batch assays. The T. versicolor culture remained active during 42 days of study in the SBR, providing approximately 80% of COD reduction. CONCLUSION: Trametes versicolor may be considered as very promising for the biological treatment of effluents from kraft pulp mills in an SBR system instead of the activated sludge mixed cultures traditionally used. Copyright © 2008 Society of Chemical Industry     

Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape‐memory alloys

This work concerns the micromechanical constitutive modelling, algorithmic implementation and numerical simulation of polycrystalline superelastic alloys under multiaxial loading. The model is formulated in finite deformations and incorporates the effect of texture. The numerical implementation is based on the constrained minimization of the Helmholtz free energy with dissipation. Simulations are conducted for thin tubes of Nitinol under tension–torsion, as well as for a simplified model of a biomedical stent. Copyright © 2004 John Wiley & Sons, Ltd.     

Defining Yield from Bender Element Measurements in Triaxial Stress Probe Experiments

This paper describes the elastic response of a block sample of compressible Chicago glacial clay under a variety of stresses and its relationship with the deformation characteristics at relatively large strains. The elastic shear stiffness was obtained from bender element tests during consolidation and shearing in drained triaxial stress probe tests. An empirical correlation was established based on the elastic shear stiffness in a preyield condition. By comparing the empirical correlation with the measured elastic shear stiffness in the stress region during probing, the changes of elastic shear stiffness were investigated. The departure of elastic shear stiffness from values computed by the empirical relation based on K0 loading directly relates to the yielding characteristics of the clay. The large-scale change of soil structure at yielding alters the well-established relationship between the elastic shear stiffness and stresses in the preyield condition. The mechanical yielding response of clays can be detected based on the systematic analysis of the elastic shear wave velocities.     

A 0.25-/spl mu/m CMOS quad-band GSM RF transceiver using an efficient LO frequency plan

This paper describes a single-chip CMOS quad-band (850/900/1800/1900 MHz) RF transceiver for GSM/GPRS applications. It is the most important design issue to maximize resource sharing and reuse in designing the multiband transceivers. In particular, reducing the number of voltage-controlled oscillators (VCOs) required for local oscillator (LO) frequency generation is very important because the VCO and phase-locked loop (PLL) circuits occupy a relatively large area. We propose a quad-band GSM transceiver architecture that employs a direct conversion receiver and an offset PLL transmitter, which requires only one VCO/PLL to generate LO signals by using an efficient LO frequency plan. In the receive path, four separate LNAs are used for each band, and two down-conversion mixers are used, one for the low bands (850/900 MHz) and the other for the high bands (1800/1900 MHz). A receiver baseband circuit is shared for all four bands because all of their channel spaces are the same. In the transmit path, most of the building blocks of the offset PLL, including a TX VCO and IF filters, are integrated. The quad-band GSM transceiver that was implemented in 0.25-/spl mu/m CMOS technology has a size of 3.3/spl times/3.2 mm/sup 2/, including its pad area. From the experimental results, we found that the receiver provides a maximum noise figure of 2.9 dB and a minimum IIP3 of -13.2dBm for the EGSM 900 band. The transmitter shows an rms phase error of 1.4/spl deg/ and meets the GSM spectral mask specification. The prototype chip consumes 56 and 58 mA at 2.8 V in the RX and TX modes, respectively.     

Cost-effectiveness of preoperative localization studies in primary hyperparathyroid disease

OBJECTIVE: To evaluate the effect of preoperative localization studies on the surgical management of patients with primary hyperparathyroid disease (PHPT). SUMMARY BACKGROUND DATA: Reported cure rates of initial surgical exploration for PHPT are close to 95%. Preoperative localization studies are frequently obtained to improve surgical success and decrease operative time. METHODS: Initial cervical exploration was performed in 113 patients with PHPT from 1981 to 1993. Twenty-four patients (21%) had surgery without preoperative localization studies. The remaining 89 patients (79%) had 132 noninvasive preoperative localization studies. Success of the localization studies in tumor localization, pathologic findings, postoperative serum calcium levels, and operative times were compared. Patient costs of the studies were calculated. RESULTS: Disease was identified during operation in 23 of 24 patients (96%) having cervical exploration without preoperative localization studies, and they had normal calcium levels after surgery. Eighty-seven of 89 patients (98%) having preoperative localization studies were surgically cured. The highest sensitivity rate (60%) and highest positive predictive value (79%) of the localization studies were found with thallium-technetium scintiscanning. Average cost of the localization studies was $901 per patient. Combination studies were obtained in 32 patients at an average cost of $1,314 per patient without improving sensitivity. Mean operating time did not differ for localized and nonlocalized patients. CONCLUSIONS: Preoperative localization studies did not improve parathyroid localization or cure rate and did not substantially shorten operating time in initial cervical exploration for PHPT. The economic burden of routine preoperative localization studies in these patients is not justified.     

Symptom correlates of attentional improvement following hospitalization for a first episode of affective psychosis

BACKGROUND: This study examined patients with a first-episode of affective psychosis during acute and compensated states in order to determine whether changes in attentional functioning over time were accompanied by changes in the severity of psychotic or affective symptoms. METHODS: Attentional performance was measured in patients (n = 27) using the degraded-stimulus continuous Performance Test (CPT) and symptoms were assessed at the time of index hospitalization, and 2 months after discharge. A comparison group of normal volunteers (n = 31) also performed the CPT two months apart. RESULTS: Patients performed significantly worse than controls at the initial testing but not at follow-up. The improvement in attentional performance significantly correlated with decreased severity of manic symptoms. CONCLUSIONS: Results suggest attentional dysfunction is a state-dependent characteristic of mania, and may provide an additional measure of clinical improvement following treatment.     

In vitro cytotoxicity and DNA damage production in Chinese hamster ovary cells and topoisomerase II inhibition by 2-[2''-(dimethylamino)ethyl]-1, 2-dihydro-3H-dibenz[de,h]isoquinoline-1,3-diones with substitutions at the 6 and 7 positions (azonafides)

The p53 tumor suppressor gene encodes a phosphoprotein which when overexpressed can induce growth arrest at the G1 and G2/M phases of the cell cycle, promote differentiation and apoptosis. This paper demonstrates that p53 can associate with trk tyrosine kinase. Expression of a murine temperature-sensitive (ts) p53 mutant in PC12 cells overexpressing trk (a model system to analyse cellular differentiation and signal transduction induced by NGF) induces morphological changes in the absence of NGF stimulation at 32 degrees C but not at 37 degrees C. In cells differentiated by p53, trk, but not EGFr, was hyperphosphorylated on tyrosine. Furthermore trk was not phosphorylated when expressed in Saos-2 cells (human osteosarcoma cells that lack expression of both endogenous trk and p53) at either temperature. However, transfection of ts p53 into these cells induces trk phosphorylation at 32 degrees C in the absence of NGF stimulation. Association of trk and p53 can be detected in NIH3T3 and PC12 cells co-expressing trk and the ts p53 mutant, in NIH3T3 and PC12 cells transfected with trk alone, and in untransfected PC12 cells, showing that overexpressed and/or endogenous trk associates with endogenous, low levels of p53. These data suggest a novel function for p53 which involves the stimulation of signal transduction pathways (mediating morphological properties of cells), possibly through association with and hyperphosphorylation of trk.