Thermal and structural behavior of milk fat. 1. Unstable species of anhydrous milk fat

The thermal and structural behavior of anhydrous milk fat (AMF) was studied by a technique that allowed simultaneous time-resolved synchrotron X-ray diffraction as a function of temperature (XRDT) and high sensitivity differential scanning calorimetry (DSC) to be carried out in the same apparatus from the same sample. In this paper (the first of a series), the less stable crystalline structures made by triacylglycerols (TG) of bulk AMF after its liquid quenching down to -8 degrees C are addressed The coexistence of two lamellar structures characterized by sharp long spacing reflections corresponding to well-defined 3L (70 A) and 2L (47 A) longitudinal stackings but broad short spacing lines related to poorly ordered hexagonal (alpha) lateral packing is shown for the first time, The bilayered structure was very unstable, since it disappeared during a 20-min isothermal recording. Simultaneous DSC and X-ray monitoring of AMF heating in the range -8, +50 degrees C at a rate of 2 degrees C/min allows the same sample to be followed on the evolution of these unstable forms to more stable varieties. The 3L stacking transforms into a new 2L crystalline structure characterized by broad LS reflections corresponding to a ill-defined 2L (37 A) longitudinal stacking but a more compact orthorhombic (beta') lateral packing. A delimitation of the domains of existence of the crystalline structures resulted from the comparison of detailed analysis of the evolutions of positions, intensities, and widths of X-ray peaks as a function of temperature to microcalorimetry recording.     

Luteinizing hormone releasing hormone (LHRH) neurons maintained in nasal explants decrease LHRH messenger ribonucleic acid levels after activation of GABA(A) receptors

Inhibition of the LHRH system appears to play an important role in preventing precocious activation of the hypothalamic-pituitary-gonadal axis. Evidence points to gamma-aminobutyric acid (GABA) as the major negative regulator of postnatal LHRH neuronal activity. Changes in LHRH messenger RNA (mRNA) levels after alterations of GABAergic activity have been reported in vivo. However, the extent to which GABA acts directly on LHRH neurons to effect LHRH mRNA levels has been difficult to ascertain. The present work evaluates the effect of GABAergic activity, via GABA(A) receptors, on LHRH neuropeptide gene expression in LHRH neurons maintained in olfactory explants generated from E11.5 mouse embryos. These explants maintain large numbers of primary LHRH neurons that migrate from bilateral olfactory pits in a directed manner. Using in situ hybridization histochemistry and single cell analysis, we report dramatic alterations in LHRH mRNA levels. Inhibition of spontaneous synaptic activity by GABA(A) antagonists, bicuculline (10(-5) M) or picrotoxin (10(-4) M), or of electrical activity by tetrodotoxin (TTX, 10(-6) M) significantly increased LHRH mRNA levels. In contrast, LHRH mRNA levels decreased in explants cultured with the GABA(A) receptor agonist, muscimol (10(-4) M), or KCl (50 mM). The observed responses suggest that LHRH neurons possess functional pathways linking GABA(A) receptors to repression of neuropeptide gene expression and indicate that gene expression in embryonic LHRH neurons, outside the CNS, is highly responsive to alterations in neuronal activity.     

Improvement of some pharmaceutical properties of drugs by cyclodextrin complexation. 4. Chlorpromazine hydrochloride

This study is a retrospective review of admissions, discharge records and blood culture results of neonates admitted to the Neonatal Intensive Care Unit of Korle Bu Teaching Hospital in Accra, from the first of January 1991 to the 31st of December 1992. During this two year period there were 443 positive blood cultures. Ninety percent of the blood cultures were from babies born in Korle Bu Teaching Hospital, thus making the incidence of neonatal bacteraemia 22.2 per 1000 live births. The overall mortality rate was 37.2%. Gram negative bacteria accounted for 70.9% and Gram positive bacteria for 29.1% of all neonatal bacteraemia. The most common isolates were Enterobacter species 29.6%; Streptococcus faecalis 14.4%; Staphylococcus aureus 10.8%; Acinetobacter species 9.5%; Klebsiella species 9% and Escherichia coli 8.8%. It is concluded that the incidence of neonatal bacterial sepsis is high in our hospital and is associated with a very high mortality rate. There is thus an urgent need to institute appropriate preventive and therapeutic measures.     

Subpallidal outputs to the nucleus accumbens and the ventral tegmental area: anatomical and electrophysiological studies

The goal of this study was to investigate the functional organization of the subpallidal-->accumbens direct and indirect feedback loops by both anatomical and electrophysiological methods. The results of the dextran-conjugated rhodamine injections into the subpallidal area has shown three distinct projections: (1) a substantial pathway from the subpallidal area to the ventral tegmental area, (2) a more diffuse rostral projection from the subpallidal area to the core area of the nucleus accumbens, and (3) a sparse pathway projecting rostrodorsally from the subpallidal area toward the thalamic regions. Electrical or chemical stimulation of the subpallidal region, which was studied by the axonal tracer, evoked inhibitory responses in the majority (60 and 80%, respectively) of the accumbens and ventral tegmental area neurons in a standard extracellular recording study. Less than 1/3 of the accumbens or ventral tegmental area cells showed an increase in the mean firing rate. The majority (77.5%) of all responded neurons had a latency of less than 10 ms. Furthermore, injection of glutamate into the subpallidal area not only altered the firing pattern of the accumbens neurons, but also attenuated their excitatory responses elicited by the electrical stimulation of the ventral subiculum. Our results indicate that the subpallidal area plays a predominantly inhibitory role in the ventral tegmental area-accumbens-subpallidal circuitry, presumably by its GABAergic projections, and may also modulate subicular input into the nucleus accumbens.     

Should diastasis recti be corrected?

From theoretical considerations animals with a higher protein-fat ratio in the body should have a higher maintenance energy requirement (MEm). The literature on this problem shows a non-uniform picture with deviating results. From the results of a series of experiments it is possible to compare the heat production (HP) of male and female animals of the Vietnamese Sway-back breed pigs which vary quite widely in their body composition. The protein-fat ratio was 1.2 for the male and 0.2 for the female animals. In the experiments 4 male and 4 female animals in the live weight range of 20-33 kg and 33-42 kg, respectively, were involved. The HP measurements were carried out in climatized respiration chambers on two levels of energy intake at ambient temperatures of 6 degrees C, 12 degrees C, 18 degrees C, 24 degrees C, 30 degrees C, and 35 degrees C. The dependence of HP on the ambient temperature has been described by a cubic regression function. Thermoneutral temperatures are lower in the female animals caused by the better insulation effect of the backfat. The difference in HP which was expected by the large difference in body composition, was not found. The absolute protein mass determined the correlation to HP. Certainly the difference increased after lowering the ambient temperature. The influence of different factors on HP is discussed.     

Computational analysis of a three-dimensional high-velocity oxygen fuel (HVOF) thermal spray torch

An analysis of a high-velocity oxygen fuel thermal spray torch is presented using computational fluid dynamics (CFD). Three-dimensional CFD results are presented for a curved aircap used for coating interior surfaces such as engine cylinder bores. The device analyzed is similar to the Metco diamond jet rotating wire torch, but wire feed is not simulated. The feed gases are injected through an axisymmetric nozzle into the curved aircap. Argon is injected through the center of the nozzle. Premixed propylene and oxygen are introduced from an annulus in the nozzle, while cooling air is injected between the nozzle and the interior wall of the aircap. The combustion process is modeled assuming instantaneous chemistry. A standard, two-equation, k-ε turbulence model is employed for the turbulent flow field. An implicit, iterative, finite volume numerical technique is used to solve the coupled conservation of mass, momentum, and energy equations for the gas in a sequential manner. Computed flow fields inside and outside the aircap are presented and discussed.     

Influence of post‐extrusion parameters on the final morphology of polystyrene/high density polyethylene blends

The deformation of the dispersed phase in polystyrene/high density polyethylene (PS/HDPE) blends produced by ribbon extrusion was studied numerically and experimentally. A mathematical model for the deformation of the dispersed phase in ribbon extrusion processing of polymer blends was developed assuming uniaxial deformation of the ribbon and the equilibrium shapes of the dispersed particles with a pressure balance over a drop. Simulated morphologies as function of the post‐extrusion parameters were obtained and compared with experiments. The analysis of the ribbon extrusion process showed that parameters such as draw ratio (DR) and ribbon‐water contact length (X) significantly influence the ribbon dimensions, the extensional stress, and the stretching force. The results also showed that deformation and coalescence of the dispersed phase in the ribbon extrusion processing of polymer blends increase at higher DR and/or lower X values. The comparison between the model and the experimental morphologies of PS/HDPE produced a good agreement.     

Drying of Biomass in a Conical Spouted Bed with Different Types of Internal Devices

The drying of sawdust was studied in a conical spouted bed pilot plant in order to adapt this feed for the pyrolysis process. Air at different temperatures was used and the effect of sawdust particle size and operating gas velocity was studied. Batch operation was performed with no internal device and with nonporous and open-sided draft tubes in order to ascertain the optimum configuration of the contactor. Although the nonporous draft tube required the lowest minimum spouting velocity, its performance was poor due to deficient gas–solid contact. Configurations with open-sided draft tubes and with no internal devices had higher efficiencies because of their better contacts. An increase in air temperature resulted in a reduction in drying time but the operating conditions need to be fine-tuned to ensure proper energy efficiency.