Tissue fixation security in transosseous rotator cuff repairs: a mechanical comparison of simple versus mattress sutures

The primary purpose of this investigation was to compare tissue fixation security by simple sutures versus mattress sutures in transosseous rotator cuff repair. These two repair techniques were each performed in 17 human cadaver shoulders, with two bone tunnels being used for the repair by two simple sutures and two other bone tunnels being used for the repair by one mattress suture. The repairs were loaded to failure in a servohydraulic materials test system. Rotator cuff repair by simple sutures was found to be significantly stronger than repair by mattress sutures (P = .0007). The average ultimate load to failure for the simple suture construct (189.62 N) was 39.72% greater than that for the mattress suture construct (135.71 N). Most of the failures occurred by suture breakage at the knot. Load-sharing by multiple suture tails and multiple knots in the simple suture configuration likely contributed to its superior strength characteristics compared with the mattress suture configuration.     

Sporadic visceral myopathy with inclusion bodies. A light-microscopic and ultrastructural study

We report the clinical and pathologic findings of two patients with sporadic visceral myopathy. Both presented with chronic intestinal pseudo-obstruction that necessitated colectomy. Microscopically, typical changes of primary visceral myopathy were present, including variable fibrous replacement of the muscularis externa and vacuolar degeneration of myocytes. In addition, the muscle cells contained cytoplasmic inclusions that have only been recently reported in visceral myopathy. These inclusions were numerous and easily visible in routine hematoxylin-eosin-stained sections but greatly enhanced by periodic acid-Schiff staining. They were reactive immunohistochemically at their periphery and were seen to be myofibrils at various stages of degeneration on electron microscopy. Inclusions were present in both muscularis externae and muscularis mucosae and were identified in mucosal biopsy specimens, providing a means of diagnosing this type of myopathic change on endoscopic biopsies.     

On modeling the design of cellular manufacturing systems

A new optimization model is discussed for the design of cellular manufacturing systems. It is based on an integer programming formulation that updates some other models by eliminating redundant machine assignment and cost coefficients dependent on cell configuration. To reduce computational burdens, a simplified integer programming model and a decomposition algorithm are proposed. Several computer solutions were performed to evaluate the performance of the new model. The computational results are discussed.     

Cr/SiO_2界面还原反应研究

利用俄歇电子能谱研究了Cr／SiO2薄膜在热处理过程中的界面扩散反应机理、界面反应动力学过程及界面反应产物。研究结果表明，Cr／SiO2体系的界面还原反应主要是Cr与SiO2的反应，其还原反应产物是CrSix和Cr2O3物种。界面还原反应的速度与反应时间的平方根成正比，其界面还原反应过程受Cr向SiO2层的扩散过程所控制，界面还原反应的表观活化能为72．5kJ／mol（约0．75eV）。     

Experimental studies of high frequency jet ventilation improved by enhancing expiratory turbulence

A 43-year-old male and a 39-year-old male presented with multiple pituitary adenomas with two distinct histological types. The first patient who had multiple endocrine neoplasia type 1 had developed acromegaly due to a growth hormone-releasing hormone (GHRH)-producing pancreatic tumor. Both plasma GHRH and growth hormone (GH) levels decreased to normal after resection of the pancreatic tumor. However, the plasma GH level gradually increased again and magnetic resonance imaging revealed pituitary adenoma formation. Histological examination revealed two different histological types of pituitary adenoma: GH cell adenoma and null cell adenoma. The second patient, with no such genetic condition, had a non-functioning pituitary adenoma. Histological examination revealed two different histological types of silent GH cell adenoma and silent gonadotroph adenoma. Careful histological examination is required to exclude the possibility of multiple pituitary adenomas.     

Spatial distribution of femoral bone mineral in dual energy X-ray absorptiometry images: a possible technique to improve discrimination between normal and osteoporotic patients

The measurement of bone mineral density (BMD) using dual energy X-ray absorptiometry (DXA) provides an indicator of subsequent risk of hip fracture, but because of the significant overlap of measurements obtained from osteoporotic and control groups its predictive power is limited. The radiographic technique of Singh grading for the assessment of femoral osteoporosis utilizes information about the distribution of trabecular bundles, but the morphological information available in the DXA image has not previously been analysed. In this study of DXA images from 64 individuals (32 controls and 32 classified as osteoporotic) a subjective grading technique analogous to Singh grading is proposed, and quantitative measurements are made of image features corresponding to two of the categories. Discrimination was assessed using receiver operating characteristic (ROC) curves: the best discrimination was by spinal BMD (Az = 0.85 +/- 0.05) a performance equalled by one of the new parameters; the subjective grading method (Az = 0.79 +/- 0.07) performed as well as measurements of BMD in the femur. These results suggest that although the alternative measures do not improve on the discrimination possible using spinal BMD, morphological information from the hip itself may in the future have a place in the assessment of bone quality.     

Experimental studies of new ductile coupling beams and multi-storey shear walls

The span-depth ratios of coupling beams to interconnect shear walls are generally small, so that brittle shear failure may occur and lead to reduced ductility. In order to improve the ductility of coupling beams for earthquake loading, a new type of ductile coupling beam is proposed in this paper. Along the middle depth of this beam, a slit through the entire thickness (a narrow hole) near each end and two lateral keyways along the remaining middle part of the span are made. The reductions of the stiffness under service load and the ultimate carrying capacity of the beam due to the weakening mentioned above are small and the ductility is greatly increased. Tests of 4-storey walls interconnected by coupling beams in three different constructions (monolithic beams, beams with a through-slit and new-type beams) indicated that shear walls with the new coupling beams possess the best aseismic behaviours under cyclic loading. The proposed new coupling beam has been used in a high-rise building.     

我国炼油技术开发的若干思考与建议

分析了我国炼油工业面临的挑战，世界炼油工业的发展趋势，提出了我国炼油技术开发要围绕符合国情的清洁燃料生产技术，炼油与化工结合的炼油技术，适合现有炼油装置技术改造、提高技术水平，降低加工成本的技术，渣油转化技术，煤制油，天然气制油技术，炼油厂智能化的技术，减少炼油厂烟尘排放的技术等7个方面开展工作的具体建议。     

On the unequal error protection for progressive image transmission.

In this paper, we consider the unequal error protection (UEP) for progressive image transmission when the coded packet size is fixed. First, we prove that, for the source code with convex rate-distortion (R-D) function and practically used channel codes, the channel code rate for each packet in the optimal rate allocation is nondecreasing indeed. Then, we give an upper bound for the channel code rate of the last packet so that the number of rate allocations in the exhaustive search can be predicted. Further, we propose a heuristic optimization method which has low complexity and obtains performance approaching to the optimal solutions for various channel conditions and transmission rates.