Fractal fracture and transformation toughening in CuNiAl single crystal

The fracture toughness J _Ic (ρ) and fractal dimension D _f of fractured surfaces of CuNiAl single crystal have been measured at temperatures in the range 20 °C to 120 °C, in which thermoelastic martensitic transformation takes place. The parent phase has higher fracture toughness than the martensite phase due to stress-induced transformation. The relationship between J _Ic (ρ) and D _f has been studied. It was found that log J _Ic (ρ) is linearly related to D _f if the failure involves a single mechanism. The slope of the plot may either be positive or negative for brittle or ductile failure, respectively. The difference in the J _Ic (ρ)-D _f correlation can be understood in terms of the micromechanism of fracture.     

Minimum entropy and information measure

Kapur et al. (1995) introduced the MinMax information measure, which is based on both maximum and minimum entropy. The major obstacle for using this measure, in practice, is the difficulty in finding the minimum entropy. An analytical expression has already been developed for calculating the minimum entropy when only variance is specified. An analytical formula is obtained for calculating the minimum entropy when only mean is specified, and numerical examples are given for illustration     

“中国式”非显形奢华

奢侈品在中国逐渐成为热门产业,建立在精神层面上的“非显形奢华”也渐为众人关注。中国拥有深厚的文化底蕴,足以创造撼动视觉新体验的新“奢华”美学。当创意市场不断推进,变得成熟之后,中国的“非显形奢华”定会有更高的价值,奢华不再是炫耀身份的代名词,而是融合民族特色、具有独特的设计品位,真正意义上的顶级产品或服务,是一种低调、内敛、优雅的“非显形奢华”。     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

Optimization of the power ascension path for a boiling water reactor using genetic algorithms

To ensure the core status can meet the requirements of thermal limits, stability and other constraints during the power ascension process of a nuclear power plant, operators usually gradually increase power based on onsite measurements and experience. To reduce the operator’s burden, this research develops a method to find an optimal power ascension path that can be followed by operators. The power ascension path is formulated as a multiobjective optimization problem with the following constraints: power ascension time, thermal limits, core stability and maximum rod line. A genetic algorithm is adopted to obtain the optimal power ascension path. The results show that using our approach full power can be achieved quickly, while maintaining reasonable margins of thermal limit and stability, in addition to satisfying maximum rod line criteria.     

Anomalous variations of OFF-State leakage current in poly-Si TFTunder static stress

Studies the anomalous variations of the OFF-state leakage current (I_OFF) in n-channel poly-Si thin-film transistors (TFTs) under static stress. The dominant mechanisms for the anomalous I_OFF can be attributed to (1) I_OFF increases due to channel hot electrons trapping at the gate oxide/channel interface and silicon grain boundaries and (2) I_OFF decreases due to hot holes accumulated/trapped near the channel/bottom oxide interface near the source region. Under the stress of high drain bias, serious impact ionization effect will occur to generate hot electrons and hot holes near the drain region. Some of holes will be injected into the gate oxide due to the vertical field (~(V_Gstress V_Dstress)/T _OX) near the drain and the others will be migrated from drain to source along the channel due to lateral electric field (~V_Dstress/L_CH)     

船舶管系减振材料的应用研究

为适应我国舰船减振降噪的需要，试制出ＱＧＤ－１和ＱＧＤ－２两种穿孔型隔振垫，主要用于管路马脚，也可用于基座等振动部位。对两种隔振垫的阻尼性能、阻燃性能、耐油性能与国外同类产品进行了比较。经管路模型试验和水泵机组试验证明，这两种隔振垫可使管路系统振动加速度级明显下降。     

Up-regulation of CIR1/CROC1 expression upon cell immortalization and in tumor-derived human cell lines

Inactivation of 5-HT1A and [3H]5-HT binding sites by N-Ethoxycarbonyl-2-ethoxy-1, 2-dihydroquinoline (EEDQ) was studied in regions of rat brain. After exposure to EEDQ (4 mg/kg body wt.) for 7 days, it is observed that the density of 5-HT1 receptor sites was decreased by nearly 20% in both cortex and hippocampus. The decrease, however, in 5-HT1A sites was more significant (70%) in both the regions. The affinity of [3H]5-HT to 5-HT1 sites was decreased significantly in both cortex and hippocampus after exposure to EEDQ, without affecting the Kd of 5-HT1A sites. Displacement studies suggested that EEDQ has high affinity to 5-HT1 sites with a Ki of 42.9+/-2.4 nM. After exposure neither basal nor 5-HT stimulated adenylyl cyclase activity was changed in cortex. The results of this study suggest that EEDQ decreases the density of 5-HT1 and 5-HT1A receptor sites but does not cause functional downregulation of these sites in rat brain.