Effects of metal-contaminated soils on the growth, sexual development, and early cocoon production of the earthworm Eisenia fetida, with particular reference to zinc

Juvenile Eisenia fetida (Savigny) were exposed for 20 weeks to an uncontaminated soil and to soils contaminated with cadmium, copper, lead, and zinc collected from seven sites at different distances from a smelting works at Avonmouth, southwest England. The survival, growth (= weight after 5 weeks exposure), time to sexual maturation (= percentages of adults present after 8 weeks), and reproduction (= number of cocoons produced by the worms) were compared with soil metal concentrations. Of the parameters measured, growth and sexual maturation time had the lowest EC50 values. The effects of metal-contaminated soils could be attributed both to the direct toxicity of the metals and to changes in the "scope for growth" of the exposed worms. A comparison of the results with those of an earlier toxicity test conducted with adult worms indicated that juveniles are more sensitive to metals than adults. Significant toxic effects on the growth and sexual maturation times of juveniles were detected in soils from sites for which no significant effects on the cocoon production of adults could be detected. The greater sensitivity of juvenile worms indicates the importance of considering effects on a variety of life history stages when conducting a risk assessment of the effects of pollutants in soils. Although E. fetida does not occur naturally in soils at Avonmouth, the present study provides evidence to support the suggestion that pollution from the smelter is responsible for the absence of worms within 2 km of the factory. Results presented in this paper, and from previous studies, suggest the observed absence is due to the effects of zinc on the growth and maturation of juveniles and the cocoon production rate of adult worms.     

Development into blastocysts of bovine oocytes cryopreserved by ultra-rapid cooling

The objective of the research described was to devise an efficient procedure to cryopreserve in vitro-matured bovine oocytes, using in vitro fertilization (IVF) and development of resultant zygotes into blastocysts as criteria of oocyte survival. Oocytes at metaphase II were found to be extremely sensitive to chilling. Cooling them to O degrees C for as little as 5 sec significantly decreased their capability to cleave and develop further after IVF; after 80 sec at 0 degrees C, only approximately 10% of chilled oocytes developed into blastocysts. Oocytes were also adversely affected by brief exposures to 4 M and 5.5 M ethylene glycol (EG) solutions supplemented with sucrose; after being suspended in either of these EG solutions in plastic straws and plunged directly into liquid nitrogen (LN2), few of the oocytes were fertilized and developed. To "outrace" chilling injury, oocytes contained in < 1 microliter of EG solution were placed onto electron microscope grids and plunged directly into N2 slush or LN2. After such ultra-rapidly cooled oocytes were warmed, 30% of them cleaved after IVF, and half of these developed into blastocysts-- survival rates equivalent to those for oocytes that had been exposed to EG without any cooling. This method offers promise as a novel way to cryopreserve bovine oocytes.     

HLA-DRB1 genes and disease severity in rheumatoid arthritis. The MIRA Trial Group. Minocycline in Rheumatoid Arthritis

OBJECTIVE: To examine the effect of alleles encoding the "shared"/"rheumatoid" epitope on rheumatoid arthritis (RA) disease severity in patients who participated in the minocycline in RA (MIRA) trial. METHODS: Of 205 patients with a week-48 visit, blood was available for typing of HLA-DRB1 and HLA-DQB1 in 174 (85%) and successfully completed in 169 (82%). Baseline erosions were used to assess disease severity and new erosions at the last visit served as a proxy for progression. RESULTS: At baseline, there was no association between the presence of erosive disease or rheumatoid factor status and the dose of rheumatoid epitope (homozygous, heterozygous, none) or the specific alleles identified. At the final visit, a gradient was observed for the 3 allelic subgroups (and their gene doses) in the occurrence of new erosions among the Caucasian placebo-treated, but not the minocycline-treated, patients. A treatment group/HLA-DR4 epitope interaction was demonstrated in multivariate analyses. Approximately two-thirds of African-American patients did not have the rheumatoid epitope. CONCLUSION: HLA-DRB1 oligotyping may be useful in predicting the progression of disease in some Caucasian patients. Our study corroborates the infrequency of the epitope among African-American patients with RA.     

Animatronic shader lamps avatars

Applications such as telepresence and training involve the display of real or synthetic humans to multiple viewers. When attempting to render the humans with conventional displays, non-verbal cues such as head pose, gaze direction, body posture, and facial expression are difficult to convey correctly to all viewers. In addition, a framed image of a human conveys only a limited physical sense of presence—primarily through the display’s location. While progress continues on articulated robots that mimic humans, the focus has been on the motion and behavior of the robots rather than on their appearance. We introduce a new approach for robotic avatars of real people: the use of cameras and projectors to capture and map both the dynamic motion and the appearance of a real person onto a humanoid animatronic model. We call these devices animatronic Shader Lamps Avatars (SLA). We present a proof-of-concept prototype comprised of a camera, a tracking system, a digital projector, and a life-sized styrofoam head mounted on a pan-tilt unit. The system captures imagery of a moving, talking user and maps the appearance and motion onto the animatronic SLA, delivering a dynamic, real-time representation of the user to multiple viewers.     

Low Voltage Electrowetting-on-Dielectric Platform using Multi-Layer Insulators

A low voltage, two-level-metal, and multi-layer insulator electrowetting-on-dielectric (EWD) platform is presented. Dispensing 300pl droplets from 140nl closed on-chip reservoirs was accomplished with as little as 11.4V solely through EWD forces, and the actuation threshold voltage was 7.2V with a 1Hz voltage switching rate between electrodes. EWD devices were fabricated with a multilayer insulator consisting of 135nm sputtered tantalum pentoxide (Ta(2)O(5)) and 180nm parylene C coated with 70nm of CYTOP. Furthermore, the minimum actuation threshold voltage followed a previously published scaling model for the threshold voltage, V(T), which is proportional to (t/ε(r))(1/2), where t and ε(r) are the insulator thickness and dielectric constant respectively. Device threshold voltages are compared for several insulator thicknesses (200nm, 500nm, and 1μm), different dielectric materials (parylene C and tantalum pentoxide), and homogeneous versus heterogeneous compositions. Additionally, we used a two-level-metal fabrication process, which enables the fabrication of smaller and denser electrodes with high interconnect routing flexibility. We also have achieved low dispensing and actuation voltages for scaled devices with 30pl droplets.     

Working in the office of "Real Soon Now"

The "Office of Real Soon Now" is an ongoing experiment to see what it's like to use large-screen projection as our only computer display. We say "Real Soon Now" to contrast our experiment with the "Office of the Future", a project at the University of North Carolina that's building a much more sophisticated, laboratory-based environment in which multiple projectors seamlessly blend to display on most of the office surfaces. Our systems aren't nearly that fancy. Our idea was to experiment with systems we could build and operate within days. In our "Real Soon Now" offices, we use large-screen projection instead of conventional monitors. We've been using these systems for more than a year, and we'll never go back.     

Best practices for preventing musculoskeletal disorders in masonry: stakeholder perspectives

Brick masons and mason tenders report a high prevalence of work-related musculoskeletal disorders (WMSDs), many of which can be prevented with changes in materials, work equipment or work practices. To explore the use of "best practices" in the masonry industry, NIOSH organized a 2-day meeting of masonry stakeholders. Attendees included 30 industry representatives, 5 health and safety researchers, 4 health/safety specialists, 2 ergonomic consultants, and 2 representatives of state workers' compensation programs. Small groups discussed ergonomic interventions currently utilized in the masonry industry, including factors affecting intervention implementation and ways to promote diffusion of interventions. Meeting participants also identified various barriers to intervention implementation, including business considerations, quality concerns, design issues, supply problems, jobsite conditions and management practices that can slow or limit intervention diffusion. To be successful, future diffusion efforts must not only raise awareness of available solutions but also address these practical concerns.     

Professional drivers: protection needed for a high-risk occupation

"On the job" motor vehicle deaths number more than 4,000 annually in the U.S. and comprise nearly one-third of all work-related deaths. Yet the Department of Labor has set no standards relating to on-the-road safety of the millions of workers whose jobs entail large amounts of driving, and Department of Transportation standards affecting occupational safety cover only drivers in interstate commerce. Drivers of some commercial vehicles, such as heavy trucks, are at special risk of injury because trucks have usually been exempted for many years from federal motor vehicle safety standards--such as standards for brakes and seatbelts--designed to prevent crashes or protect occupants in crashes. Observations based on a series of 150 fatal crashes involving tractor trailers illustrate the need for better protection of this large population of high-risk workers. Clarification of responsibility within the various federal agencies and application of available knowledge and technology are essential.     

The organization and postnatal development of the commissural projection of the rat somatic sensory cortex

Anterograde and retrograde tracing experiments have been used to demonstrate the origin and terminal distribution of commissural fibers in the first somatosensory cortex (SI) of the rat. The commissural fibers originate from pyramidal cells of all layers, but predominantly from layers III and V. The fibers terminate in a series of approximately vertical bands. In each of these there are concentrations of terminals extending from the inner portion of the molecular layer to the deep portion of layer III as well as in the superficial part of layer V, and in layer VI. Discrete vertical bands of cortex are reciprocally connected across the midline to give both the origin and terminal regions of the projection a patchy or "columnar" appearance. The commissural fibers arise from and terminate in areas of the cortex that lie between and alongside the aggregations of granule cells that distinguish SI of the rat. No commissural fibers terminate within the aggregations of layer IV cells themselves but the more superficial terminal ramifications may come to overlie these aggregations. A heterotopic projection to the contralateral second somatosensory cortex has been observed and is similar in form to the homotopic projection to SI. Many commissural fibers have crossed the midline in the corpus callosum by the day of birth but lie in the underlying white matter and do not enter the cortical plate until at least the third postnatal day. During the first postnatal week these fibers grow somewhat diffusely into the maturing cortex and their topographic and laminar pattern of distribution attains its adult characteristics by the end of the first week. Commissural axons, thus, arise from immature cells but the maturation of cell form seems to precede the ingrowth of these axons and the acquisition of commissural synapses.