Design of optimum signals for the simultaneous estimation of timedelay and Doppler shift

The problem of joint estimation of time delay and Doppler shift is considered from the point of view of the Wigner distribution of the signal. A very efficient method of obtaining the optimum signal with minimum estimation error based on the convexity of the design region is developed. Practical applications, however, require the signal to satisfy other constraints which present complications in acquiring the optimum signal. A design approach based on the method of simulated annealing is suggested to solve for the optimum signal under constraints. The performance of the signals so obtained is evaluated and compared with that of signals obtained by synthesis     

Dye coupling between rat striatal neurons recorded in vivo: compartmental organization and modulation by dopamine

1. The presence of dye coupling between striatal neurons was investigated using in vivo intracellular recording and dye injection in adult rats. In 17% of the cases in which a single striatal neuron was injected with Lucifer yellow, more than one labeled neuron was recovered. In control rats, this dye coupling was observed only between single pairs of medium spiny neurons and only when the neuron injected exhibited the Type II response profile as defined by paired-pulse stimulation of corticostriatal afferents. 2. After intravenous administration of the D1/D2 agonist apomorphine at a behaviorally effective dose (i.e., 0.1-0.3 mg/kg), an increase in the incidence (from 17% to 82% of injected cells) and extent (from 2 cells to 3-7 cells labeled per injection) of dye coupling was observed. This effect was mediated by D2 receptor stimulation because administration of the D2 agonist quinpirole caused similar alterations in the incidence and extent of dye coupling (66% coupled). In contrast, administration of the D1 agonist SKF 38393 or the D1 antagonist SCH 23390 did not result in any significant alteration in dye coupling. 3. In control rats, the entire somatodendritic regions of dye-coupled neurons were found to be localized within single matrix compartments of the striatum. However, after intravenous administration of apomorphine or quinpirole, clusters of dye-coupled neurons were found to extend across the patch/matrix boundary. Moreover, dye coupling was observed after injecting cells exhibiting either the Type I or the Type II response profile. 4. In response to D2 receptor stimulation, both the extent and the pattern of coupling between striatal neurons is altered, resulting in direct coupling between neurons that are otherwise functionally and anatomically segregated in the control animal.     

Effects of chronic U50,488H treatment on binding and mechanical responses of the rat hearts

The effects of chronic injection of U50,488H (trans-3,4-dichloro-N-[2-(1-pyrrolidinyl)cyclohexyl]benzeacetamidel++ +), a selective kappa opioid agonist, on the properties of the binding sites of tritiated U69593 [(5 alpha,7 alpha,8 beta)-(-)-N-methyl-N-(7-(1-pyrrolidinyl)-1-oxaspiro (4,5)dec-8-yl)benzeneacetamide], another selective kappa opioid agonist, and mechanical responses to U50,488H of the heart were studied. Rats received injection twice a day with U50,488H for 4 days. Binding studies on the crude membrane homogenates revealed that there was no change in maximum binding, but a significant increase in Kd after the treatment, indicating that the number of kappa binding sites remained unchanged whereas the affinity of the binding sites to kappa-agonist decreased. The study on the mechanical responses to U50,488H in the isolated perfused heart preparation showed that although the agonist at 10(-6) M caused MR2266 reversible reductions in heart rate and force of contraction as well as ventricular ectopic beat in the heart of rats in the control group, its effects were absent in the U50,488H-treated group, indicating the development of tolerance to the mechanical effects of U50,488H on the heart. The results indicate that the development of tolerance to the mechanical effects of a kappa-agonist after chronic treatment with the agonist was not accompanied by down-regulation, but only a slight and significant reduction in affinity of kappa binding sites in the rat heart.     

能消除RGB差分视频传输线上共模噪声的放大器

5类网络电缆由四对双绞线组成,并有耐用的外套,这种电缆能为分量视频信号的传输提供一种通用而有良好性价比的选择。三个线对可以承载RGB视频信号,而第四对线可以承载音频信号、同步信号和其它传输信号。不幸的是,5类电缆缺乏屏蔽,因此容易遭受共模噪声耦合     

Retinal neurostimulator for a multifocal vision prosthesis.

A neurostimulator application-specific integrated circuit (ASIC) with scalable circuitry that can stimulate 14 channels, has been developed for an epi-retinal vision prosthesis. This ASIC was designed to allow seven identical units to be connected to control up to 98 channels, with the ability to stimulate 14 electrodes simultaneously. The neurostimulator forms part of a vision prosthesis, designed to restore vision to patients who have lost their sight due to retinal diseases such as retinitis pigmentosa and macular degeneration. For charge balance, the neurostimulator was designed to stimulate with current sources and sinks operating together, and with the ability to drive a hexagonal mosaic of electrodes to reduce the electrical crosstalk that occurs when multiple bipolar stimulation sites are active simultaneously. A hexagonal mosaic of electrodes surrounds each stimulation site and has been shown to effectively isolate each site, increasing the ability to inject localized independent charge into multiple regions simultaneously.     

Data mining of resilience indicators

In recent years, the Asia-Pacific region has experienced several financial setbacks, including speculative attacks in 1998 and the SARS outbreak in 2003. Financial stresses of this nature are unanticipated, and not all of the dangers can be predicted by the examination of market information and macroeconomic indicators. The Early Warning System (EWS) that has been adopted by the International Monetary Fund may not be able to predict future financial crises for all possible scenarios, because shocks come in many different forms. To supplement the EWS, this paper proposes a data mining framework to measure the resilience of an economy. The resilience framework does not predict a crisis, but rather assesses the current state of health of an economy and its ability to withstand a financial shock should one occur. The framework is based on a feedback system consisting of two stages. The first stage assigns a resilience score to each economy based on a fuzzy logic scoring scheme that is built on the ambiguous reasoning of experts. The second stage uses the classification tree approach to estimate thresholds for each economic indicator, and examines the quality of the fuzzy score. The result from the second stage is then passed back to the first stage as feedback. The final result is obtained when the feedback system reaches its equilibrium state. The proposed resilience framework is applied to the external-sector and the public-sector economies of several countries to illustrate its applicability.     

Modelling of fatigue damage progression and life of CFRP laminates

A progressive fatigue damage model has been developed for predicting damage accumulation and life of carbon fibre‐reinforced plastics (CFRP) laminates with arbitrary geometry and stacking sequence subjected to constant amplitude cyclic loading. The model comprises the components of stress analysis, fatigue failure analysis and fatigue material property degradation. Stress analysis of the composite laminate was performed by creating a three‐dimensional finite element model in the ANSYS FE code. Fatigue failure analysis was performed by using a set of Hashin‐type failure criteria and the Ye‐delamination criterion. Two types of material property degradations on the basis of element stiffness and strength were applied: a sudden degradation because of sudden failure detected by the fatigue failure criteria and a gradual degradation because of the nature of cyclic loading, which is driven by the increased number of cycles. The gradual degradation of the composite material was modelled by using functions relating the residual stiffness and residual strength of the laminate to the number of cycles. All model components have been programmed in the ANSYS FE code in order to create a user‐friendly macro‐routine. The model has been applied in two different quasi‐isotropic CFRP laminates subjected to tension–compression (T–C) fatigue and the predictions of fatigue life and damage accumulation as a function of the number of cycles were compared with experimental data available in the literature. A very good agreement was obtained.