Synthesis and structural characterization of new defect pyrochlore type AxLnySb2O6+z antimoniates (0<x, y, z<1; A = Rb, Cs, Tl; Ln = Eu, Gd, and Y) prepared by coprecipitation

New cubic defect pyrochlore type A_xLn_ySb₂O_6+z antimoniates (0<x,y,z<1; A=Rb, Cs, Tl; Ln=Eu, Gd, and Y) (space group Fd3m) were prepared by calcination in air at 650 °C of compositions obtained by a coprecipitation method. Their crystal structures were refined by the Rietveld procedure and further confirmed by X-ray absorption spectroscopy (EXAFS) experiments. Refinements of the X-ray powder diffraction data show a partial and statistical occupation of the 8b site by alkaline or thallous ions and oxygen and lead to values close to 0.33 for the only refinable positional x parameter of the 48f oxygenated site.     

The effects of patterned calorie-restricted diets on mammary tumor incidence and plasma endothelin levels in DMBA-treated rats

Chronic caloric restriction has been shown to inhibit mammary tumor promotion in the 7,12-dimethyl-benz[a]anthracene (DMBA) rat mammary tumor model. The objectives of this study were to determine (i) the effects of chronic caloric cycling (yo-yo dieting) on mammary tumor promotion by high fat diets and (ii) the effect of three dietary regimens +/- superimposed mammary tumor burden on plasma endothelin-1,2 (ET) levels. Female Sprague-Dawley rats were treated with DMBA (5 mg/rat) and divided into three dietary groups: ad libitum (AL) (containing 15% corn oil); 40% calorie restricted (CR) (containing 20% corn oil so consumption of fat was equivalent between AL and CR); a calorie cycled (CC) group fed alternatively AL and CR diets each 48 h period. After 10 weeks, tumor incidences were: AL, 63%; CR, 27%; CC, 57% (AL versus CR, P < 0.05; CC versus CR, P < 0.05; AL versus CC, NSD). ET levels (pg/ml plasma) were: AL, 16.0 +/- 6.54; CR, 32.31 +/- 0.34; CC, 23.44 +/- 5.04 (AL versus CR, P < 0.01; CC versus CR, P < 0.01; AL versus CC, P < 0.05). Plasma ET levels were independent of tumor incidence and tumor burden, but plasma ET levels were significantly increased in rats with a prior history of calorie restriction. As expected, maintained caloric restriction reduced mammary tumor incidence but intermittent caloric restriction (caloric cycling or yo-yo dieting) was without similar benefit.     

Manganese Distribution between FeO‐MnO‐SiO2–CaO–MgO‐Al2O3 Slags and Molten Iron

Pretreatment of high manganese hot metal is suggested to produce hot metal suitable for further processing to steel in conventional LD converter and rich manganese slags satisfy the requirements for the production of silicomanganese alloys. Manganese distribution between slag and iron represents the efficiency of manganese oxidation from hot metal. The present study has been done to investigate the effect of temperature, slag basicity and composition of oxidizer mixture on the distribution coefficient of manganese between slag and iron. Ferrous oxide activity was determined in molten synthetic slag mixtures of FeO‐MnO‐SiO₂–CaO–MgO‐Al₂O₃. The investigated slags had chemical compositions similar to either oxidizer mixture or slags expected to result from the treatment of high manganese hot metal. The technique used to measure the ferrous oxide activity in the investigated slag systems was the well established one of gas‐slag‐metal equilibration in which molten slags contained in armco iron crucibles are exposed to a flowing gas mixture with a known oxygen potential until equilibrium has been attained. After equilibration, the final chemical analysis of the slags gave compositions having a particular ferrous oxide activity corresponding to the oxygen potential of the gas mixture. The determined values of ferrous oxide activity were used to calculate the equilibrium distribution of manganese between slag and iron. Higher manganese distribution between slag and iron was found to be obtained by using oxidizer containing high active iron oxide under acidic slag and relatively low temperature of about 1350°C.     

Determination of water activities and osmotic and activity coefficients of the system NaCl–BaCl2–H2O at 298.15 K

The water activities of the mixed aqueous electrolyte NaCl–BaCl₂(aq) are measured at total molalities from 0.25 mol kg⁻¹ to about saturation for different ionic strength fractions (y) of NaCl with y=0.33,0.50,0.67. The results allow the deduction of osmotic coefficients. The experimental results are compared with the predictions of the Zdanovskii, Stokes, and Robinson (ZSR), Kusik and Meissner (KM), Robinson and Stokes (RS), Lietzke and Stoughton (LSII), Reilly, Wood, and Robinson (RWR), and Pitzer models. From these measurements, the Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture. The excess Gibbs energy is also determined.     

Polyurethane foams with 1,3‐pyrimidine ring

Attempts of obtaining of polyurethane foams using polyetherols with 1,3‐pyrimidine ring (obtained in reactions of 6‐aminouracil with oxiranes) are reported. Properties of the foams are investigated, especially their thermal stability. The foams show an improved thermal stability up to 200°C for a long time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Potentiometric studies of oxidation–reduction reactions with redox copolymers

Polymeric oxidants in the bead form that were macroporous styrene/divinylbenzene copolymers containing N‐chlorosulfonamide functional groups (in sodium or hydrogen form) or N‐bromosulfonamide groups (in sodium form) were synthesized and investigated to determine their oxidizing powers. The redox potentials of the N‐chlorosulfonamide/sulfonamide and N‐bromosulfonamide/sulfonamide systems were determined by potentiometric studies at different pH values with aqueous solutions of Na₂SO₃, KCN, and KSCN as reducers. The formal redox potentials of the N‐chlorosulfonamide copolymers were 0.79, 0.44, and ?0.12 V at pH's of 1.8, 8.45, and 13.6, respectively. The formal redox potential of the N‐bromosulfonamide copolymer was about 100 mV higher in comparable conditions and in solutions over pH = 5 (e.g., 0.56 V at pH = 8.56). The comparatively higher oxidizing power of the N‐bromosulfonamide copolymer was particularly evident in a strong alkaline medium (in which the N‐chlorosulfonamide copolymer was not reactive). In contrast, the N‐chlorosulfonamide copolymer showed strong oxidative properties in acidic media (in which the N‐bromosulfonamide copolymer decomposed itself). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Quantification of ageing of ultracapacitors during cycling tests with current profile characteristics of hybrid and electric vehicles applications

The ageing quantification of ultracapacitors in cycle-life tests has been studied. Current profiles and the characteristics of the ultracapacitors used in hybrid and electric vehicle applications are specified and validated. With these profiles, significant self-heating occurs but without exceeding the manufacturers' limits. Thus, ultracapacitors are aged in a short time with the same degradation mechanisms observed in normal use. Ageing evaluation is based on the measurement of the electrical parameter changes. A particular phenomenon is performance recovery during rest periods when power-cycling is interrupted for electrical characterisation. Therefore, an online characterisation procedure was added for more accurate evaluation of the ultracapacitors' ageing. A number of devices from two manufacturers are cycled with different current profiles. The obtained results are presented and discussed.