Infinite elements for the analysis of open dielectric waveguides

The finite-element method is applied to the modal analysis of unbounded, arbitrarily shaped, and arbitrarily inhomogeneous dielectric waveguides with the use of new infinite elements incorporating several radially decaying exponential trial functions. The outer optimization loop required by methods that use a single decaying trial function is eliminated, and all modes corresponding to a given phase constant are calculated in one pass of the solver. The method is tested for examples involving slab, circular, and square dielectric waveguides     

Hydrogen-assisted cracking studies of 4340 steel by using the optical method of caustics

The optical method of caustics is used to measure the effect of hydrogen on the localized deformation within the fracture process zone (PZ). In particular, the role of the PZ in hydrogen-assisted cracking (HAC) of 4340 steel in hydrogen gas at 1 atm is examined. No change in the caustic diameter was detected prior to crack initiation but an “anomalous” enlargement of the caustic diameter as a function of crack growth was observed as a result of crack tunneling. The “center” of the caustic follows the position of the internal crack front, thus providing a simple means to monitor the growth of internal cracks. It is demonstrated that the technique provides a sensitive means for detecting HAC initiation (the smallest crack depth change detected is 35 μm) and insight into the three-dimensional character of the PZ.     

Calcium phosphate/calcium oxalate crystal association in urinary stones: implications for heterogeneous nucleation of calcium oxalate

PURPOSE: Most stones contain more than one type of crystals, and some combinations, such as calcium phosphate/calcium oxalate, are more common than others. Epitaxy between the crystals has been suggested to play a role in growth of such stones. The specific aim of this study is to investigate the involvement of calcium phosphate in crystallization of calcium oxalate. MATERIALS AND METHODS: Twenty calcium oxalate stones or stone fragments were examined using various microscopic techniques, including scanning, transmission and back-scattered electron microscopy. Similarly, calcium oxalate stones induced on a plastic foreign body implanted inside urinary bladders of laboratory rats were also investigated. Examination of the interface between calcium phosphate and calcium oxalate crystals was emphasized. RESULTS: Close association between crystals of calcium phosphate and calcium oxalate were found in both the human and rat stones. All crystals examined were associated with an organic matrix on the surface and contained copious amounts of organic material within the crystalline entities. Interface between the crystals also appeared to be occupied by organic matrix. CONCLUSIONS: Results of this and other studies from our laboratory indicate that epitaxy between various crystals, even though theoretically possible, appears unlikely in vivo. The appearance of specific crystalline combinations in stones is probably a result of the urinary environment being conducive for crystallization of those components. Heterogeneous nucleation of calcium oxalate is most probably induced by biological elements, including membranous cellular degradation products.     

The association of leukocytes with secondary brain injury

Shock increases mortality from brain injuries, but the mechanism is poorly understood. We hypothesized that brain injury followed by shock and resuscitation leads to a secondary reperfusion injury mediated in part by polymorphonuclear leukocytes (PMNs). To validate this hypothesis, we studied cerebral perfusion pressure (CPP), intracranial pressure (ICP), cerebral blood flow (CBF), cortical water content (CWC), and hemodynamic variables in a porcine model of focal cryogenic brain injury and hemorrhagic shock. Cerebral PMN accumulation (CPMN) in the injured and uninjured hemispheres was determined histologically from the total PMNs in five high-power fields (400x). Twenty-nine mature swine were randomized to four groups. Group 1, the control group, was instrumented only. Group 2 animals had a brain injury alone and were studied for 24 hours. Group 3 animals had a brain injury and hemorrhagic shock. Group 4 animals had hemorrhagic shock alone. Brain injury followed by shock caused a significantly greater ICP and a significantly lower CBF than brain injury or shock alone. There was no significant difference in CPP between groups after resuscitation. The CWC of the lesioned area was similar in both brain-injured groups but was significantly increased when compared with the controls and the shock-only group. The CWC of the nonlesioned hemisphere was higher in group 3 than in group 2. The CPMN in both hemispheres in group 3 was significantly greater than in either group 2 or group 4. There was a significant positive correlation between CPMN and both ICP and CWC, and a significant negative correlation between CPMN and CBF. These data suggest an association between CPMN accumulation and secondary brain injury.     

一种新颖嵌入式结构：更大更好的主板

AdvancedTCA(先进电信计算体系结构)是为下一代电信设备制定的一个有关电路板、背板和软件的新规范.由于具有更大的形状系数、高可用性性能以及高速互连性,AdvancedTCA有可能成为当今专有设备的现成替代品.这一新颖体系结构出现时,电信市场正面临业务与技术的双重挑战.     

Heat rejection limits of air cooled plane fin heat sinks for computer cooling

Current desktop computers typically use fan-heat sinks for cooling the CPU, referred to as active heat sinks. This work seeks to determine the heat rejection limits for such fan-heat sinks, within specific fan and heat sink space limits. A fixed volume, 80 /spl times/ 60 /spl times/ 50 mm is chosen as the limiting dimensions, which includes the fan volume. The present work addresses plane fin heat sinks, on which a typical 60 mm fan is mounted. Both duct flow and impinging flow are considered. Analytically based models are used to predict the optimum geometry (minimum convection resistance) for plane fins with duct and impinging flow configurations. Also assessed are the effects of increased fan speed (up to 25%) and heat sink base size (33% increase) on air-cooling limits in duct and impinging flow. Tests on fan-heat sinks are done to validate the predictions. Optimization is also done for an enhanced (offset-strip) fin geometry in duct flow. The plane fin is found to outperform the enhanced geometry.