A Multi‐Functional Highly Efficient Upconversion Luminescent Film with an Array of Dielectric Microbeads Decorated with Metal Nanoparticles

Upconversion nanoparticles (UCNPs) have been integrated with photonic platforms to overcome the intrinsically low quantum efficiency limit of upconversion luminescence (UCL). However, platforms based on thin films lack transferability and flexibility, which hinders their broader and more practical application. A plasmonic structure is developed that works as a multi‐functional platform for flexible, transparent, and washable near‐infrared (NIR)‐to‐visible UCL films with ultra‐strong UCL intensity. The platform consists of dielectric microbeads decorated with plasmonic metal nanoparticles on an insulator/metal substrate. Distinct improvements in NIR confinement, visible light extraction, and boosted plasmonic effects for upconversion are observed. With weak NIR excitation, the UCL intensity is higher by three orders of magnitude relative to the reference platform. When the microbeads are organized in a square lattice array, the functionality of the platform can be expanded to wearable and washable UCL films. The platform can be transferred to transparent, flexible, and foldable films and still emit strong UCL with a wide viewing angle.     

Latch Applicator for Efficient Delivery of Dissolving Microneedles Based on Rapid Release of Elastic Strain Energy by Thumb Force (Adv. Funct. Mater. 11/2023)

Dissolving microneedle (DMN) is an attractive alternative to parenteral and enteral drug administration owing to its painless self-administration and safety due to non-generation of medical waste. For reproducible and efficient DMN administration, various DMN application methods, such as weights, springs, and electromagnetic devices, have been studied. However, these applicators have complex structures that are complicated to use and high production costs. In this study, a latch applicator that consists of only simple plastic parts and operates via thumb force without any external complex device is developed. Protrusion-shaped latches and impact distances are designed to accumulate thumb force energy through elastic deformation and to control impact velocity. The optimized latch applicator with a pressing force of 25 N and an impact velocity of 5.9 m s⁻¹ fully inserts the drug-loaded tip of the two-layered DMN into the skin. In an ovalbumin immunization test, DMN with the latch applicator shows a significantly higher IgG antibody production rate than that of intramuscular injection. The latch applicator, which provides effective DMN insertion and a competitive price compared with conventional syringes, has great potential to improve delivery of drugs, including vaccines.     

Investigation of 4H-SiC MOS capacitors annealed in diluted N2O at different temperatures

Thermally grown oxide on 4H-SiC has been post-annealed in diluted N₂O (10% N₂O in N₂) at different temperatures from 900 to 1100 °C. The quality of the nitrided oxide and the SiO₂/4H-SiC interface was investigated by AC conductance and high frequency C-V measurements based on Al/SiO₂/4H-SiC metal-insulator-semiconductor (MOS) structure. It is found that N₂O annealing at 1000 °C produces the lowest interface state density, though the difference is not so significant when compared to the other samples annealed at 900 and 1100 °C. These results can be explained by the high temperature dynamic decomposition process of N₂O. By fitting the AC conductance data, it is found that higher temperature nitridation increases the capture cross-section of the interface traps.     

A /spl Sigma/-/spl Delta/ fractional-N frequency synthesizer using a wide-band integrated VCO and a fast AFC technique for GSM/GPRS/WCDMA applications

A fractional-N frequency synthesizer (FNFS) in a 0.5-/spl mu/m SiGe BiCMOS technology is implemented. In order to operate in a wide-band frequency range, a switched-capacitors bank LC tank voltage-controlled oscillator (VCO) and an adaptive frequency calibration (AFC) technique are used. The measured VCO tuning range is as wide as 600 MHz (40%) from 1.15 to 1.75 GHz with a tuning sensitivity from 5.2 to 17.5 MHz/V. A 3-bit fourth-order /spl Sigma/-/spl Delta/ modulator is used to reduce out-of-band phase noise and to meet a frequency resolution of less than 3 Hz as well as agile switching time. The experimental results show -80 dBc/Hz in-band phase noise within the loop bandwidth of 25 kHz and -129 dBc/Hz out-of-band phase noise at 400-kHz offset frequency. The fractional spurious is less than -70 dBc/Hz at 300-kHz offset frequency and the reference spur is -75 dBc/Hz. The lock time is less than 150 /spl mu/s. The proposed synthesizer consumes 19.5 mA from a single 2.8-V supply voltage and meets the requirements of GSM/GPRS/WCDMA applications.     

A 0.5-8.5 GHz fully differential CMOS distributed amplifier

A fully integrated fully differential distributed amplifier with 5.5 dB pass-band gain and 8.5 GHz unity-gain bandwidth is described. The fully differential CMOS circuit topology yields wider bandwidth than its single-ended counterpart, by eliminating the source degeneration effects of parasitic interconnect, bond wire, and package inductors. A simulated annealing CAD tool underpins the parasitic-aware methodology used to optimize the design including all on-chip active and passive device and off-chip package parasitics. Mixed-mode S-parameter measurement techniques used for fully differential circuit testing are reviewed. Integrated in 1.3/spl times/2.2 mm/sup 2/ in a standard 0.6 /spl mu/m CMOS process, the distributed amplifier dissipates 216 mW from a single 3 V supply.     

Fast full search motion estimation algorithm using early detection of impossible candidate vectors

To reduce the amount of computations for a full search (FS) algorithm for fast motion estimation, we propose a new and fast FS motion estimation algorithm. The computational reduction of our FS motion estimation algorithm comes from fast elimination of impossible motion vectors. We obtain faster elimination of inappropriate motion vectors using efficient matching units from localization of a complex area in image data. In this paper, we show three properties in block matching of motion estimation. We suggest two fast matching scan algorithms: one from adaptive matching scan and the other from fixed dithering order. Experimentally, we remove the unnecessary computations by about 30% with our proposed algorithm compared with the conventional fast FS algorithms.     

A 2-Gbaud 0.7-V swing voltage-mode driver and on-chip terminatorfor high-speed NRZ data transmission

A large-swing, voltage-mode driver and an on-chip termination circuit are presented for high-speed nonreturn-to-zero (NRZ) data transmission through a copper cable. The proposed driver with active pull-up and pull-down can generate a 700-mV signal to deliver a 2 Gbaud serial NRZ data stream. Low output impedance offered by simple negative-feedback resistors alleviates the detrimental effect of the parasitic capacitance by supplying fast current impulses. A proposed on-chip termination circuit provides termination impedance to a mid-supply termination voltage with the benefit of reduced parasitic capacitance and better termination characteristics compared with off-chip termination. The driver and termination circuits have been incorporated in a 2 Gbaud transceiver chip and fabricated in 0.35 μm CMOS technology. Measurements show a 1.4 V differential swing with a slew rate of 2.5 V/ns at the receiver output and a 65% reduction of reflection by the on-chip termination circuit with power consumption of 191 mW at 3.3 V supply     

Force control for hydraulic load simulator using self-tuning grey predictor – fuzzy PID

Hydraulic systems play an important role in modern industry for the reason that hydraulic actuator systems have many advantages over other technologies with electric motors, as they possess high durability and the ability to produce large forces at high speeds. Therefore, the hydraulic actuator has a wide range of application fields such as hydraulic punching, riveting, pressing machines, and molding technology, where controlled forces or pressures with high accuracy and fast response are the most significant demands. Consequently, many hybrid actuator models have been developed for studying how to control forces or pressures with best results.This paper presents a kind of hydraulic load simulator for conducting performance and stability testing related to the force control problem of hydraulic hybrid systems. In the dynamic loading process, perturbation decreases control performance such as stability, frequency response, and loading sensitivity decreasing or bad. In order to improve the control quality of the loading system while eliminating or reducing the disturbance, a grey prediction model combined with a fuzzy PID controller is suggested. Furthermore, fuzzy controllers and a tuning algorithm are used to change the grey step size in order to improve the control quality. The grey prediction compensator can improve the system settle time and overshoot problems. Simulations and experiments on the hydraulic load simulator are carried out to evaluate the effectiveness of the proposed control method when applied to hydraulic systems with various external disturbances encountered in real working conditions.     

Broadcasting System Compliant with MPEG‐2/4 IPMPX

In this paper, we present an intellectual property management and protection (IPMP) system in a broadcasting environment to provide mechanisms for copyright and contents protection that are compliant with the MPEG‐2 and MPEG‐4 IPMP Extension (IPMPX) specifications. The technology for processing IPMP related information was exploited, and a terminal model has been successfully designed and implemented. In addition, interoperability, which is the main objective of MPEG‐2/4 IPMPX, has been addressed in detail. The experimental results show that the implemented system performs the IPMP process well, meeting the requirements of a broadcasting environment.     

Chiroptical‐Conjugated Polymer/Chiral Small Molecule Hybrid Thin Films for Circularly Polarized Light‐Detecting Heterojunction Devices

Herein, a simple and facile strategy is described to obtain chiroptically active semiconductor thin films by blending of poly(3‐alkylthiophene)s, which are conventional achiral polymer semiconductors, and 1,1′‐binaphthyl (BN), a versatile chiral molecule. As expected, the intermolecular interaction between the two materials is important to extend the chirality of the binaphthyl molecules to the hybrid films. The controlled phase separation and crystallization of poly[3‐(6‐carboxyhexyl)thiophene‐2,5‐diyl] (P3CT) and binaphthyl hybrid films result in unique heterojunction bilayer thin‐film structures that consisted of BN microcrystals at the top and a P3CT/BN mixed layer at the bottom. Such heterojunction bilayer films exhibit significantly amplified chiroptical response with weak broadened tails, which is due to the enhanced crystallization of the chiral BN molecules and formation of heteroaggregates in the hybrid films. Based on the characterization of crystalline structure and photoluminescence analysis, it is found that new electronic energy states are formed in the conduction band region of P3CTs in the P3CT/BN heteroaggregates, which contribute to chirality transfer from BN to the hybrid films. As a proof of concept, a photodiode capable of distinguishably sensing the left‐ and right‐handed circularly polarized light is successfully fabricated by using the hybrid films with the heterojunction bilayer structure.