大学物理实行分层次因材施教改革探讨

本文结合近五年多我校大学物理的分层次教学改革的实践,介绍了一些值得借鉴和推广的经验,对下步如何深入分层次、分类型教学的具体设想和目标进行了探讨。     

疲劳与蠕变复合作用下PS的应变与寿命

对PS在疲劳/蠕变复合作用下应变与寿命进行了研究。结果表明：其疲劳/蠕变曲线与纯蠕变曲线十分相似。加载时间周期越短和疲劳载荷变化越频繁。结束普弹应变阶段应变越小，进入延迟弹性变形的平台应变阶段越早。在疲劳/蠕变复合作用下聚苯乙烯存在疲劳和蠕变的交互损伤，其断裂寿命比纯疲劳或纯蠕变的断裂寿命低。断裂寿命减小，疲劳/蠕变的交互损伤程度与温度密切相关，PS在较低温度的疲劳/蠕变交互损伤作用大于较高温度的交互损伤作用。随温度升高，疲劳/蠕变断裂寿命下降是疲劳和蠕变各自的单独损伤增加所致。     

UASB-SBR工艺处理城市生活污水的研究

研究了UASB工艺处理城市生活污水的可行性，通过UASB与SBR组合工艺的运行实验，得出在水力停留时间3h时，COD去除率为61．67％-82．32％，出水COD达到国家污水排放二级标准。在氮磷去除效果不佳的情况下，采用SBR工艺处理后，其出水COD、SS、氮、磷等指标均达到国家污水一级排放标准。     

纤维素衍生物液晶相转变和织态结构

本文综述了纤维素衍生物液晶态相转变和织态结构。描述了纤维素衍生物从各向同性态向液晶态的转变过程和液晶态的织构特征。讨论了溶液浓度和温度对液晶相织构的影响。探讨了各种因素,如溶剂、取代基含量、外加力场和外加磁场等对液晶相的形成及织态结构的影响。     

Diffusion and sorption of benzene vapor through polybutadiene‐, polybutadiene/styrene‐, and polybutadiene/acrylonitrile‐based polyurethanes

A series of polyurethane (PU) films made from toluene diisocyanate (TDI), 1,4‐butanediol (BDO), and hydroxyl‐terminated polybutadiene (HTPB), hydroxyl terminated polybutadiene/styrene (HTBS), or hydroxyl terminated polybutadiene/acrylonitrile (HTBN) was synthesized by solution polymerization. The absorption of benzene vapor was found mainly in the soft phase. The equilibrium adsorption (M_∞) was reduced with increasing hard segment content for all the PUs. The values of M_∞ were in the sequence of HTBN‐PUs > HTBS‐PUs > HTPB‐PUs, which could be explained by the different interaction parameters between soft segments and benzene. The HTBN‐PU film showed the lowest degree of phase segregation and had more hard segments intermixed in the soft phase, restricting the movement of soft segments, and therefore resulted to non‐Fickian behavior, while the HTPB‐PU is antithetical. FTIR and atomic force microscopy were utilized to identify the hydrogen bonding behavior and morphology change of the PU films before and after the absorption of benzene vapor. The tensile strength of the HTBN‐PUs showed a greater decrease than that of HTBS‐PUs and HTPB‐PUs after absorbing benzene vapor. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2984–2991, 2004     

Mass production of high-quality multi-walled carbon nanotube bundles on a Ni/Mo/MgO catalyst

A new catalyst (Ni/Mo/MgO) is reported, with which one can synthesize multi-walled carbon nanotube (MWNT) bundles with a yield of more than 45 times the amount of the pristine catalyst, using a methane-hydrogen mixture as precursor. Powder X-ray diffraction, Raman spectroscopy and thermal gravimetric analysis show that the purity of the as-prepared MWNTs is over 97%. The diameter of the carbon nanotubes is 9-20 nm, measured by high-resolution electron microscopy on 421 individual MWNTs. The high purity of the as-prepared MWNTs allows us to omit the usual complex purification process required for carbon nanotubes synthesized by chemical vapor deposition. Because of its durable high activity, the Ni/Mo/MgO catalyst in its pristine state is ideal for mass production of high-quality MWNTs. The synergism of nickel and molybdenum is considered the main reason for the high yield of carbon nanotubes.     

Teeth segmentation of dental periapical radiographs based on local singularity analysis

Teeth segmentation for periapical raidographs is one of the most critical tasks for effective periapical lesion or periodontitis detection, as both types of anomalies usually occur around tooth boundaries and dental radiographs are often subject to noise, low contrast, and uneven illumination. In this paper, we propose an effective scheme to segment each tooth in periapical radiographs. The method consists of four stages: image enhancement using adaptive power law transformation, local singularity analysis using Hölder exponent, tooth recognition using Otsu's thresholding and connected component analysis, and tooth delineation using snake boundary tracking and morphological operations. Experimental results of 28 periapical radiographs containing 106 teeth in total and 75 useful for dental examination demonstrate that 105 teeth are successfully isolated and segmented, and the overall mean segmentation accuracy of all 75 useful teeth in terms of (TP, FP) is (0.8959, 0.0093) with standard deviation (0.0737, 0.0096), respectively.     

Dynamic compensation by fusing a high-speed actuator and high-speed visual feedback with its application to fast peg-and-hole alignment

This paper presents a dynamic compensation concept to grapple with the dynamic defects of a traditional robot arm, especially while performing high-speed endpoint regulations. The proposed high-speed dynamic compensation concept offers a new point of view for cooperating with a traditional manipulator to realize highly dexterous performance of manipulations. The concept is realized through adoption of a high-speed light-weight actuator as well as endpoint closed loop configured high-speed cameras. The dynamic compensation is analyzed experimentally with 1000 Hz visual feedback and a high-speed finger for a robot arm in the case of one degree of freedom. The advantage of the proposed approach is that the modeling for the robot system’s dynamics is not needed, whereas it is necessary and trivial in order to realize high-speed regulations by traditional approaches. Thus, the control issue becomes easier with the proposed approach. As an application for this concept, fast peg-and-hole alignment with large position and attitude uncertainty is studied. The alignment algorithm is based on a visual compliance strategy. Alignment experiments show that with the proposed concept of dynamic compensation as well as visual compliant motion control, robust and fast convergence was realized for most cases.     

乳液聚合导致一种新的转相过程

借助电导率仪、光学显微镜和亚微粒子分析仪等测试手段。研究了乳液聚合导致一种新的转相过程,并用于八甲基环四硅氧烷的聚合中。研究表明:体系以 W/O 相态开始,单体由连续相向水相(分散相)内的胶束中扩散并发生聚合反应,形成 O/W/O 复合乳液。反应过程中连续相体积不断减小,分散相(O/W 复相)体积不断增大,当达到某一临界相比时,体系发生转相,转相后乳液为 O/W。对本实验物系,转相点临界相比主要由初始水油比和乳化剂浓度决定。同常规的乳液聚合相比,伴有转相现象的乳液聚合有其自身的特点,转相使得聚合速率、聚合物粒径及分布、乳液稳定性等发生变化。     

Characterization of poly(vinyl pyrrolidone‐co‐isobutylstyryl polyhedral oligomeric silsesquioxane) nanocomposites

Poly(vinyl pyrrolidone‐co‐isobutyl styryl polyhedral oligomeric silsesquioxane)s (PVP–POSS) were synthesized by one‐step polymerization and characterized using FTIR, high‐resolution ¹H‐NMR, solid‐state ¹³C‐NMR, ²⁹Si‐NMR, GPC, and DSC. The POSS content can be controlled by varying the POSS feed ratio. The T_g of the PVP–POSS hybrid is influenced by three main factors: (1) a diluent role of the POSS in reducing the self‐association of the PVP; (2) a strong interaction between the POSS siloxane and the PVP carbonyl, and (3) physical aggregation of nanosized POSS. At a relatively low POSS content, the role as diluent dominates, resulting in a decrease in T_g. At a relatively high POSS content, the last two factors dominate and result in T_g increase of the PVP–POSS hybrid. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2208–2215, 2004