Hydrodynamics and mass transfer in a bubble column with an organic liquid

Hydrodynamic and mass transfer data in Soltrol-130 (a mixture of C₉+ iso-paraffins) were measured in a 0.305 m diameter bubble column. The gas holdup structure (i.e., the contributions to holdup from the small and large bubble fractions of the dispersion) for this hydrocarbon liquid in the churn turbulent flow regime was analyzed using the dynamic gas disengagement technique. The validity of the assumption of axially uniform gas holdup structure was checked. Literature correlations were found inadequate to explain the observed gas holdup and the volumetric mass transfer coefficients for Soltrol-130. The volumetric mass transfer coefficient per unit volume of large bubbles is shown to be independent of superficial gas velocity for the fully developed churn turbulent regime. The present hydrodynamic and mass transfer data in the churn turbulent regime should be useful in the design and scale-up of bubble columns used in organic process industries.     

Criteria for axial dispersion effects in adiabatic trickle bed hydroprocessing reactors

This paper first outlines an approximate solution to the governing equations for an adiabatic hydroprocessing trickle bed reactor operating in the presence of axial dispersion. The approximate solution agrees very well with the rigorous numerical solution for Peclet numbers greater than approximately three.Using the approximate solution, criteria for significant axial dispersion effect are obtained. These criteria indicate that at high conversions, an adiabatic operation produces a larger axial dispersion effect than the isothermal operation. At low conversions, opposite results are obtained.The derived criteria are used to evaluate the orders of magnitude of Peclet number required to avoid axial dispersion effect in pilot scale adiabatic reactors for (a) residual hydrodesulfurization (b) hydrocracking of gas oils and (c) denitrogenation of shale oils. The calculations indicate that the axial dispersion effect is of less importance in case (c) than in cases (a) and (b).Finally, the role of heat effects on the axial dispersion in a vapor phase fixed bed adiabatic reactor is evaluated.     

DPV: a taxonomy for utilizing deep learning as a prediction technique for various types of cancers detection

Multimedia Tools and Applications - Deep learning (DL) is a type of machine learning capable of processing large quantities of data to provide analytic results based on a particular...     

Generic Adaptive Sliding Mode Control for a Quadrotor UAV System Subject to Severe Parametric Uncertainties and Fully Unknown External Disturbance

International Journal of Control, Automation and Systems - This paper aims to provide a generic robust controller that is able to manipulate all kinds of quadrotor unmanned aerial vehicle (UAV)...     

Ultrahigh molecular weight polyethylene with improved crosslink density,oxidation stability,and microbial inhibition by chemical crosslinking and tea polyphenols for total joint replacements

Highly crosslinked ultrahigh molecular weight polyethylene (UHMWPE) stabilized by vitamin E (VE) is widely applied in artificial joints as the bearings. Despite the approval, there is a discord that VE lowers the crosslinking efficiency, limiting its use at high concentration. In this work, we aim to obtain highly crosslinked and oxidation resistant UHMWPE through the conjunction of tea polyphenol and chemical crosslinking. We hypothesized that highly incorporated tea polyphenol with multiple reactive sites can ameliorate crosslinking efficiency of chemical crosslinked UHMWPE in comparison to VE. Epigallocatechin gallate (EGCG) as representative tea polyphenol was incorporated into UHMWPE at high concentration (2–8 wt%), followed by chemical crosslinking with 2 wt% organic peroxide. Unlike VE/UHMWPE blends as the control, chemical crosslinking achieved an increasing trend in crosslink density of EGCG/UHMWPE blends with increasing antioxidant concentration. High concentration of EGCG also enhanced the oxidation stability of UHMWPE. Intriguingly, EGCG endowed UHMWPE with an excellent antimicrobial property, which was inefficient in VE/UHMWPE. Cell viability was hardly affected by the high loaded antioxidant and peroxide. The chemically crosslinked UHMWPE blended with EGCG is proved to be a reasonable, cost effective and realistic alternative for use in artificial joints.     

A cross-layer approach for partition detection at overlay layer for structured P2P in MANETs

Due to limited radio range and mobility of nodes in mobile ad hoc networks (MANETs), the network partitioning and merging could occur frequently. When structured peer-to-peer (P2P) overlays are running over MANETs, then network partition in the physical network can also cause network partition at the overlay layer. Existing approaches for structured P2P overlay over MANETs do not detect network partition at the overlay layer. This paper proposes a cross-layer approach to detect network partition at the overlay layer for structured P2P overlay over MANETs. Simulation results show that the proposed approach is highly effective and efficient in terms of routing overhead, success ratio and false-negative ratio.     

Stiction – definition, modelling, detection and quantification

Stiction or high static friction is a common problem in spring-diaphragm type control valves, which are widely used in the process industry. Recently, there have been many attempts to understand, define, model and detect stiction in control valves. There are several methods for detecting stiction, but quantification of the actual amount of stiction still remains a challenge. This paper discusses briefly the definition and modelling of stiction. Then it demonstrates a new method to detect and quantify the actual amount of valve stiction using routine operating data. The proposed method is completely data-driven. No additional excitation or experimentation of the plant is required.     

Characterization of the paste-aggregate interfacial transition zone surface roughness and its relationship to the fracture toughness of concrete

Notched concrete beams containing varying amounts of pea gravel aggregate were tested under three-point bend, and their fracture toughness determined. The roughness of the region near the interface between the cement paste and the aggregate was evaluated by digitizing images from a confocal tandem scanning microscope. The average roughness of the paste was found to be related to the fracture parametersK _IC (critical stress intensity factor) and a _c (critical crack extension), as determined by the two-parameter fracture model. The roughness in the proximity of the paste-aggregate interface was generally higher than that of the paste far from the aggregate, and it decreased with the distance from the aggregate. This study indicates that aggregate particles increase the toughness of the cement paste portion of concrete, and that this is an important mechanism for toughening concrete.     

Genetic analysis of delta helD and delta uvrD mutations in combination with other genes in the RecF recombination pathway in Escherichia coli: suppression of a ruvB mutation by a uvrD deletion

Helicase II (uvrD gene product) and helicase IV (helD gene product) have been shown previously to be involved in the RecF pathway of recombination. To better understand the role of these two proteins in homologous recombination in the RecF pathway [recBCsbcB(C) background, we investigated the interactions between helD, uvrD and the following RecF pathway genes: recF, recO, recN and ruvAB. We observed synergistic interactions between uvrD ant the recF, recN, recO and recG genes in both conjugational recombination and the repair of methylmethane sulfonate (MMS)-induced DNA damage. No synergistic interactions were detected between helD and the recF, recO and regN genes when conjugational recombination was analyzed. We did, however, detect synergistic interactions between helD and recF/recO in recombinational repair. Surprisingly, the uvrD deletion completely suppressed the phenotype of a ruvB mutation in a recBCsbcB(C) background. Both conjugational recombination efficiency and MMS-damaged DNA repair proficiency returned to wild-type levels in the deltauvrDruvB9 double mutant. Suppression of the effects of the ruvB mutation by a uvrD deletion was dependent on the recG and recN genes and not dependent on the recF/O/R genes. These data are discussed in the context of two "RecF" homologous recombination pathways operating in a recBCsbcB(C) strain background.     

DeepClassRooms: a deep learning based digital twin framework for on-campus class rooms

Neural Computing and Applications - A lot of different methods are being opted for improving the educational standards through monitoring of the classrooms. The developed world uses Smart...