Impact of power control and lognormal shadowing on the mean transmit power of Bluetooth devices

This letter analyzes Bluetooth's power-control algorithm with a goal to study the mean transmit power required in the presence of lognormal shadowing. The following results are found. 1) A smaller power-control step size yields a lower mean transmit power. 2) When the standard deviations of lognormal shadowing are 3 and 6 dB, respectively, a Bluetooth device needs to consume 11.1 dB and 15.0 dB more in the transmit energy than the minimum one required in the absence of shadowing. 3) The transmit energy consumption varies by around 6 dB among Bluetooth devices as a result of the /spl plusmn/6 dB tolerance in the golden receive power range, which has a nominal size of 20 dB.     

A flexible array synthesis method using quadratic programming

A highly flexible synthesis method for an arbitrary array is proposed to best approximate a desired array pattern in a minimum-mean-square-error sense. The basic idea of the technique is to form a quadratic program with its cost function given by the mean-square error between the array response and a properly selected pattern described by a known mathematical function. This quadratic program can be a constrained or unconstrained optimization problem depending on the requirements of the desired array pattern. In formulating the quadratic program, no assumption has been made on the gain/phase response or characteristics of the individual array elements. Therefore, one can synthesize an array of arbitrary shape to any appropriate pattern with the characteristic of the array elements taken into consideration as long as one is able to model the array accurately. The proposed method is used to synthesize arrays of different shapes, linear as well as planar arrays (including rectangular and circular planar arrays), using a Chebyshev polynomial or zero function as a design template, to illustrate the feasibility of the proposed method     

Simple formula for analysing the centre-fed hemisphericaldielectric resonator antenna

A new single-mode theory is given for the centre-fed hemispherical dielectric resonator antenna. From theory, a simple formula is derived for efficient computation of the impedance matrix, and hence the input impedance of the antenna. The theory is in excellent agreement with the rigorous theory and will be useful for design engineering     

Bright Aggregation‐Induced Emission Dots for Dynamic Tracking and Grading of Patient‐Derived Xenografts in Zebrafish

Cancer prognosis will benefit from a scoring system that could grade malignant traits of patient‐derived cells by assessing their growth and metastasis in a living system. Specific tracking of patient‐derived cells requires labeling by contrast agents with good signal‐to‐noise ratio and no specific stain of host tissues. Towards this aim, aggregation‐induced emission (AIE) dots are developed for in vivo cancer tracking with emphasis on reproducible optimized formulation and specific fluorescent labeling of cells that enable enhanced spatial temporal resolution in vivo. The importance of energy‐dependent AIE dots uptake for patient‐derived cell labeling is emphasized to reveal their specific uptake by viable cancer cells. Using optically transparent zebrafish embryo, the ability is demonstrated to follow the engraftment of transplanted AIE dot labeled cells in zebrafish brains over one week. Cells detected outside the brain after 7 d are quantified as metastatic cells. Results from seven clinical samples demonstrate the utility of this methodology to differentiate low engraftment level of benign neoplasms from higher engraftment level and metastasis detected in malignant ovarian cancer specimens. Achieving clinically validated results supports the use of AIE dot labeled patient derived cells in zebrafish xenografts for future cancer prognosis.     

Process windows for low-temperature Au wire bonding

The process windows are presented for low-temperature Au wire bonding on Au/Ni/Cu bond pads of varying Au-layer thicknesses metallized on an organic FR-4 printed circuit board (PCB). Three different plating techniques were used to deposit the Au layers: electrolytic plating, immersion plating, and immersion plating followed by electrolytic plating. Wide ranges of wire bond force, bond power, and bond-pad temperature were used to identify the combination of these processing parameters that can produce good wire bonds, allowing the construction of process windows. The criterion for successful bonds is no peel off for all 20 wires tested. The wire pull strengths and wire deformation ratios are measured to evaluate the bond quality after a successful wire bond. Elemental and surface characterization techniques were used to evaluate the bond-pad surfaces and are correlated to wire bondability and wire pull strength. Based on the process windows along with the pull strength data, the bond-pad metallization and bonding conditions can be further optimized for improved wire bondability and product yields. The wire bondability of the electrolytic bond pad increased with Au-layer thickness. The bond pad with an Au-layer thickness of 0.7 μm displayed the highest bondability for all bonding conditions used. The bondability of immersion bond pads was comparable to electrolytic bond pads with a similar Au thickness. Although a high temperature was beneficial to wire bondability with a wide process window, it did not improve the bond quality as measured by wire pull strength.     

In vivo Doppler shift measurements using multimode fiber-opticcatheters

A new fiber-optic catheter for in vivo blood-flow measurements has been developed. The catheter is designed to measure blood flow in both the forward (toward the catheter tip) and reverse (away from the catheter tip) flow directions. It consists of two multimode optical fibers with core diameter of 50 μm and cladding diameter of 125 μm. One fiber transmits the laser beam into blood and the other receives the backscattered light from the erythrocytes within the probe volume. In the flow experiment, it was found that the flow within the boundary layer is indeed laminar and, hence, the relationship between the Doppler shift frequencies and the flow velocities is linear, thereby making the linear calibration possible for predicting the free stream flow velocity. Plots of the maximum shift frequency (frequency at which the Doppler spectrum disappeared into the noise spectrum) against the flow velocities are found to be more linear in both the forward and reverse flow directions than that of the dominant shift frequency (frequency with the highest amplitude). These results were reaffirmed by the numerical flow simulation along the catheter side wall     

Scalar quantisation of LSF parameters using vector measurement

A new form of line spectral frequency (LSF), bounded line spectral frequency, is presented. It is shown that the new representation is more efficient than the direct line spectral frequency and the differential line spectral frequency (DLSF). By using a vector measure, the scalar quantisation of tenth-order linear predictive coding (LPC) parameters can be coded at 28 bit/frame with a transparent quantisation quality     

Effects of high temperature annealing on the device characteristics of Ga0.52In0.48P/GaAs and Al0.52In0.48P/GaAs heterojunction bipolar transistors

GaInP/GaAs and AlInP/GaAs heterojunction bipolar transistor (HBT) structures were grown by low pressure metalorganic vapor phase epitaxy and annealed at various temperatures up to 675°C for 15 min. Subsequent comparisons with HBTs fabricated on both annealed and unannealed control samples showed no effects for annealing up to and including 575°C, but significant changes in the electrical characteristics were observed at an annealing temperature of 675°C. For the GaInP/GaAs devices, the base current increased by a significant amount, reducing the gain and increasing the base current ideality factor from 1.07 to 1.9. Photoluminescence and electrical measurements on the structures indicated that both the emitter and base were affected by an increase in the recombination times in those regions. These effects were attributed to an out-diffusion of hydrogen from the base during annealing. The emitter of the AlInP/GaAs HBT was affected less by the hydrogen diffusion because of the larger bandgap. These observations have important implications for device performance dependence on the details of the temperature/time profile subsequent to the base growth.     

Study on stacking faults and microtwins in wide bandgap II-VI semiconductor heterostructures grown on GaAs

ZnMgSSe and ZnSSe layers grown on GaAs substrates with GaAs buffer layers by molecular beam epitaxy have been examined by transmission electron microscopy (TEM). The depth level at which paired triangular stacking faults are nucleated in the ZnMgSSe/GaAs heterostructure has been investigated by using the plan-view TEM technique. It has been found that in the ZnMgSSe/GaAs heterostructure the nucleation of the paired stacking faults occurs within a range of depth which starts at the II-VI/GaAs interface and ends at a level that is above the interface by about 120 nm. The dominant type of defects in ZnSSe layers, which have the single triangular shape, has been identified to be microtwins by high resolution TEM.     

An efficient algorithm for superresolution in medium field imaging

In this paper, we study the problem of reconstruction of a high-resolution (HR) image from several blurred low-resolution (LR) image frames in medium field. The image frames consist of blurred, decimated, and noisy versions of a HR image. The HR image is modeled as a Markov random field (MRF), and a maximum a posteriori (MAP) estimation technique is used for the restoration. We show that with the periodic boundary condition, a HR image can be restored efficiently by using fast Fourier transforms. We also apply the preconditioned conjugate gradient method to restore HR images in the aperiodic boundary condition. Computer simulations are given to illustrate the effectiveness of the proposed approach. This research was conducted with support from the Army Research Office Grant DAAD 19-03-1-0261 and the National Science Foundation Grant CCF-0429481. Research supported in part by RGC Grant Nos. 7130/02P, 7046/03P, 7035/04P and 7035/04P and FRG/04-05/II-51.