Direct Injection of CRISPR/Cas9-Related mRNA into Cytoplasm of Parthenogenetically Activated Porcine Oocytes Causes Frequent Mosaicism for Indel Mutations

Some reports demonstrated successful genome editing in pigs by one-step zygote microinjection of mRNA of CRISPR/Cas9-related components. Given the relatively long gestation periods and the high cost of housing, the establishment of a single blastocyst-based assay for rapid optimization of the above system is required. As a proof-of-concept, we attempted to disrupt a gene (GGTA1) encoding the α-1,3-galactosyltransferase that synthesizes the α-Gal epitope using parthenogenetically activated porcine oocytes. The lack of α-Gal epitope expression can be monitored by staining with fluorescently labeled isolectin BS-I-B₄ (IB4), which binds specifically to the α-Gal epitope. When oocytes were injected with guide RNA specific to GGTA1 together with enhanced green fluorescent protein (EGFP) and human Cas9 mRNAs, 65% (24/37) of the developing blastocysts exhibited green fluorescence, although almost all (96%, 23/24) showed a mosaic fluorescent pattern. Staining with IB4 revealed that the green fluorescent area often had a reduced binding activity to IB4. Of the 16 samples tested, six (five fluorescent and one non-fluorescent blastocysts) had indel mutations, suggesting a correlation between EGFP expression and mutation induction. Furthermore, it is suggested that zygote microinjection of mRNAs might lead to the production of piglets with cells harboring various mutation types.     

Modification and laboratory evaluation of a TSI ultrafine condensation particle counter (Model 3776) for airborne measurements

A butanol-type ultrafine condensation particle counter (UCPC, Model 3776, TSI, Inc., Shoreview, MN, USA), which can achieve a 50% detection efficiency diameter (d₅₀) of 2.5 nm using a capillary-sheath structure, was modified and tested in the laboratory for airborne measurements. The aerosol flow rate through the capillary is a key factor affecting the quantification of aerosol particle number concentrations. A pressure-dependent correction factor for the aerosol flow rate was determined using a newly added mass flow meter for the sheath flow and the external calibration system. The effect of particle coincidence in the optical sensing volume was evaluated using an aerosol electrometer (AE, Model 3068B, TSI, Inc.) as a reference. An additional correction factor for the coincidence effect was derived to improve the quantification accuracy at higher concentrations. The particle detection efficiency relative to the AE was measured for mobility diameters of 3.1–50 nm and inlet absolute pressures of 101–40 kPa. The pressure dependence of the d₅₀ value, asymptotic detection efficiency, and shape of the particle detection efficiency curve is discussed, along with simple theoretical calculations for the diffusion loss of particles and the butanol saturation ratio in the condenser.

© 2017 American Association for Aerosol Science     

Aerosol-to-liquid collection: A method for making aqueous suspension of hydrophobic nanomaterial without adding dispersant

This article introduces an aerosol-based technique to make aqueous suspension of hydrophobic nanomaterial without adding dispersant. The method is intended for making a test-sample for evaluating the toxicities of nanomaterial by intra-tracheal administration. The method can wet the surface of hydrophobic nanomaterial within a few seconds. After the wetting process five to ten minutes of sonication assisted with manual stirring can fully disperse the hydrophobic nanomaterials in water. Two types of TiO₂ nanomaterial were used in this study; Tayca JMT-150IB whose surfaces are coated with negatively charged hydrophobic functional group, and P25 whose surfaces are naturally hydrophilic. Nanomaterials are aerosolized by a dry-method and become micrometer-sized agglomerates. Then supersaturated water vapor is condensed onto these airborne agglomerates by using a growth tube collector. The collected suspension (CS) of hydrophobic nanomaterial (JMT-150IB) is prepared in two steps; airborne agglomerates are collected onto a flat surface then transferred to liquid-water and subsequently sonicated for complete dispersion. This method works equally well for making the CS of hydrophilic nanomaterial. Size distribution measurements of the CS show that airborne agglomerates of TiO₂ dissociate into smaller units of agglomerates once they are captured into water, and the sizes of the agglomerates are in the nanometer to sub-micrometer range. Light scattering technique is used to show that a short sonication process can reproduce the particle number concentration of the CS after long storage.

Copyright © 2017 American Association for Aerosol Research     

Removal of lignin in a liquid system by an isolated fungus

The screening of a strain which could perform lignin removal was carried out. Based on taxonomic study the isolated strain (LM‐2) was identified as Penicillium sp. LM‐2 could decolorize 0.6 g dm^?3 lignin within 4 days in a shaking culture at 25 °C. The efficiency of decolorization of the lignin was over 80% in the pH range of 4.0–6.0, but was low above pH 6.2. The rise of temperature had a slight adverse effect on the lignin decolorization in the range of 25–35 °C. Lignolytic enzymes such as lignin peroxidase, manganese peroxidase and laccase were not detected in the culture broth or within the fungal cells. The lignin was removed from the high molecular weight fraction mainly by adsorption and accumulation inside the cells. © 2001 Society of Chemical Industry     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

Shear-induced pre-crystallization structures of long chain branched polypropylene under steady shear flow near the melting temperature

Shear-induced crystallization of a long chain hyper-branched polypropylene (LCB-PP, denoted PP-3) was carried out at a relatively high temperature of 170 °C, close to its melting temperature of 158 °C. Small-angle X-ray scattering (SAXS) showed that the intensity ratio of the normal to the perpendicular to the shear (V/H) was always larger than 1 for PP-3, indicating that shish-like structures were predominately formed and further growth to kebab was suppressed in PP-3. The crystallization behavior of PP-3 can be explained by the nature of PP-3 that there were a large amount of crystallization nuclei due to their branching points, and the point-like precursors formed from these nuclei were arrayed linearly along the shear direction and transformed into thread-like precursors or premature shishs; however, owing to the large amount of branching, further progress in crystallization was suppressed.     

Synthesis and electrode performance of layered nickel dioxide containing alkaline ions

Several polymorphs of layered nickel dioxide were prepared by using the chemical insertion of alkaline ions into Li_0.10NiO₂. We used aqueous AOH (A = Li, Na, K) solutions as reducing agents. Sodium and potassium insertion resulted in hydrated layered compounds that can be classified as γ-NiOOH with high crystallinity, while lithium insertion occurred without hydration. We discuss the coordination environment around the A⁺ ions for these inserted compounds. The thermal behavior, analyzed using high temperature (HT) X-ray diffraction (XRD) and thermogravimetric (TG) measurements, indicated that heating the hydrate at 150 °C yielded its dehydrate. The electrode performance of the nickelate was studied in lithium cells. We discuss the effect of interlayer water on cell rechargeability and the similarity between these nickelate and hydrated manganese dioxide (birnessite).     

“Deactivation of copper electrode” in electrochemical reduction of CO2

Metallic Cu electrode can electrochemically reduce CO₂ to CH₄, C₂H₄ and alcohols with high yields as revealed by the present authors. Many workers reported that formation of CH₄ and C₂H₄ rapidly diminishes during electrolysis of CO₂ reduction. This paper shows that such deactivation of Cu electrode is reproduced with electrolyte solutions prepared from reagents used by these workers. Deactivated Cu electrodes recovered the electrocatalytic activity for CO₂ reduction by anodic polarization at −0.05 V versus she in agreement with the previous reports. Features of the deactivation depend greatly on the individual chemical reagents. Purification of the electrolyte solution by preelectrolysis with a Pt black electrode effectively prevents the deactivation of Cu electrode. Anode stripping voltammetry of Cu electrodes, which were deactivated during electrolysis of CO₂ reduction, showed anodic oxidation peaks at ca. −0.1 or −0.56 V versus she. The severer the deactivation of the Cu electrode was, the higher electric charge of the anodic peak was observed. It is presumed that some impurity heavy metal, originally contained in the electrolyte, is deposited on the Cu electrode during the CO₂ reduction, poisoning the electrocatalytic activity. On the basis of the potential of the anodic peaks, Fe²⁺ and Zn²⁺ are assumed to be the major contaminants, which cause the deactivation of the Cu electrode. Deliberate addition of Fe²⁺ or Zn²⁺ to the electrolyte solutions purified by preelectrolysis exactly reproduced the deactivation of a Cu electrode in CO₂ reduction. The amount of the deposited Fe or Zn on the electrode was below the monolayer coverage. Electrothermal atomic absorption spectrometry (etaas) showed that Fe originally contained in the electrolyte solution is effectively removed by the preelectrolysis of the solution. Mechanistic difference is discussed between Fe and Zn in the deterioration of the electrocatalytic property of Cu electrode in the CO₂ reduction. The concentration of the impurity substances originally contained in the chemical reagents as Fe or Zn is estimated to be far below the standard of the impurity levels guaranteed by the manufacturers. Presence of trimethylamine in the electrolyte solution also severely poisons a Cu electrode in the CO₂ reduction. It was concluded that the deactivation of Cu electrode in CO₂ reduction is not caused by adsorption of the products or the intermediates produced in CO₂ reduction.     

Radiation‐initiated graft polymerization of methylmethacrylate onto poly(tetrafluoroethylene): Characterization by 1H‐NMR

A broad‐line ¹H‐NMR study was carried out to examine the local structure of poly(methylmethacrylate) (PMMA) grafted onto Poly(tetrafluoroethylene) (PTFE). The NMR spectra were observed for three different samples with 1.0, 5.4, and 7.0 wt % PMMA over the temperature range from 150 to 380 K. With the help of selectively deuterated PMMA (PMMA‐d₅ and PMMA‐d₈)‐grafted samples, the NMR spectra were analyzed in terms of two components—a Gaussian (G) component, and a Lorentzian (L) component. Based on the second moments (〈ΔH²〉) analysis, the L and G components were attributed to the ¹H–¹H dipolar interactions within one CH₃ group and the interactions of CH₃ groups that are closely located in aggregated PMMA chains. Combining the results with the temperature dependence of 〈ΔH²〉 and the angular resolved XPS, the location and rotational motion of PMMA grafted onto PTFE are discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1386–1394, 1999     

Simplified method for determining cadmium concentrations in rice foliage and soil by using a biosensor kit with immunochromatography

BACKGROUND: The behavior of cadmium in ecosystems needs to be monitored because of the human toxicity of this heavy metal. The need recently arose for a simple and quick on‐site test for trace levels of Cd in food and environmental samples. In response, an immunochromatographic assay kit for detecting Cd was manufactured by Kansai Electric Power Co. of Japan. This kit uses the antigen–antibody complex reaction between the Cd–EDTA complex and an anti‐Cd–EDTA antibody and shows the results in terms of the degree of color developed on a test paper. We previously reported the successful use of this kit to determine Cd concentrations in brown rice. Here, we applied the kit to the determination of Cd concentrations in rice foliage and soil. RESULTS: Cadmium in rice foliage was not extracted successfully by the method used for brown rice. However, it was successfully extracted by 0.1 mol L^?1 HCl solution at a rice foliage:HCl ratio of 1:20, and coexisting metals were removed sufficiently by the column treatment. The Cd concentrations determined by immunochromatographic assay were well correlated with the values obtained by acid decomposition and inductively coupled plasma mass spectrometry. The 0.1 mol L^?1 HCl‐extractable Cd concentration in soil was also determined successfully with the kit. CONCLUSION: Approximate Cd concentrations in rice plants and 0.1 mol L^?1 HCl‐extractable Cd concentrations in soil can be monitored easily and quickly by this method at locations where facilities for acid digestion and precision analysis are not available. Copyright © 2009 Society of Chemical Industry