Validity of dynamic electrochemical impedance spectra of some amine corrosion inhibitors in petroleum/water corrosive mixtures by Kramers-Kronig transformation

In our previous works, the corrosion inhibition properties of propylamine (PA), iso-propylamine (i-PA), butylamine (BA), tert-butylamine (t-BA), hexylamine (HA), ethylenediamine (EDA), diethanolamine (DEA), 3-amino-1-propanol (3-AP), 2-dimethylethanolamine (2-DEA), cyclohexylamine (CHA), N-methylcyclohexylamine (N-MCA) and dicyclohexylamine (DCHA) have been investigated by means of electrochemical impedance spectroscopy (EIS) with a carbon steel rotating disc electrode in some petroleum/water corrosive mixtures containing acetic acid and NaCl at 25 °C. In this work, the Kramers-Kronig transformations (KKTs) were applied to evaluate the validity of the impedance data of these amine compounds in hydrodynamic condition. The results obtained showed that experimental impedance data did not satisfy in K-K relations completely viz. indicated some errors. These errors were related to stray capacitances, external transmission line effects, pits formation and change in interface during data acquisition at high and low frequencies regions. In addition, the selection of a suitable equivalent circuit strongly emphasized to better interpret of EIS data which in turn cause better resulted KKTs spectra. With considering obtained transformations, more effective inhibitor was selected with regard to its charge transfer resistance, the corrosion capacitance and well satisfying in K-K relations.     

Low-loss high power RF switching using multifinger AlGaN/GaN MOSHFETs

We demonstrate a novel RF switch based on a multifinger AlGaN/GaN MOSHFET. Record high saturation current and breakdown voltage, extremely low gate leakage current and low gate capacitance of the III-N MOSHFETs make them excellent active elements for RF switching. Using a single element test circuit with 1-mm wide multifinger MOSHFET we achieved 0.27 dB insertion loss and more than 40 dB isolation. These parameters can be further improved by impedance matching and by using submicron gate devices. The maximum switching power extrapolated from the results for 1A/mm 100 /spl mu/m wide device exceeds 40 W for a 1-mm wide 2-A/mm MOSHFET.     

Effect of variable friction coefficient on sheet metal drawing

A variable friction model that relates the parameters of sheet metal drawing to the local lubrication conditions taking place during the deformation, has been integrated to a finite element program. Variable friction coefficients for the contacting surfaces are determined from the friction model, which uses the related parameters obtained at each time step of the finite element program as inputs. A number of numerical runs have been performed and the strains are compared with the experimental results for circular blanks. A good agreement is obtained between the numerical and experimental results for the variable friction model used.     

Rapid determination of the fracture toughness of metallic materials using circumferentially notched bars

Three types of material whose fracture toughness tests were previously performed by using circumferentially notched bars, namely (1) a dual-phase steel with three different morphologies; (2) an Al-Zn-Mg-Cu-wrought alloy; and (3) Al-Si-cast alloys with three different Si contents, were investigated in terms of accuracy and reliability of the testing method. Also, the advantages of using circumferentially notched bars for fracture toughness determination of metallic materials were discussed. With the help of stress concentration factors, which are associated with the bluntness of the notch, correction factors for the fracture toughness calculations are derived. The corrected fracture toughness values are found to be close to the uncorrected ones, implying that the testing procedure is reliable.     

Compact WLAN disc antennas

A novel conical beam patch antenna design, suitable for local area network applications, uses a central cylindrical connection from the disc to ground to achieve a large reduction in resonant size. Results on efficiency, bandwidth, and pattern are reported for several prototypes.     

Pharmacokinetic and pharmacodynamic effects of vaginal rings releasing levonorgestrel at a rate of 27 micrograms/24 hours: a pilot study

The pharmacokinetic and pharmacodynamic effects of vaginal rings releasing levonorgestrel (L-NOG) at an initial rate of 27 micrograms/24 h were studied in a group of 12 normally menstruating women during 90 days of continuous use (i.e., during three 30-day treatment segments). Blood samples were drawn immediately before insertion, 15 and 30 min, as well as 1, 2, 4, 8, 12 and 24 h after insertion of the rings, and thereafter three times weekly throughout the study for the analysis of L-NOG, estradiol, progesterone and sex hormone-binding globulin (SHBG). Endometrial biopsies were obtained for a morphometric analysis in a pre-treatment (control) cycle and in the 6th and 10th weeks of treatment. The peak of average L-NOG levels was reached within two hours after the insertion of rings. Until 24 h after insertion, the levels did not change significantly. Thereafter, a decrease at a rate of 0.2% per day was initiated. The L-NOG and SHBG levels were highly correlated. This was seen for both the pre-treatment SHBG vs L-NOG (r = 0.96) and the treatment SHBG vs L-NOG levels (r = 0.92). There was a significant (p < 0.001) decrease of SHBG levels due to treatment. During the total of 36 treatment segments, a normal ovarian function was seen in 47% of the segments. The women were anovulatory and had an inadequate lutal function in 28% and 25% of segments, respectively. No correlation between the L-NOG levels and ovarian reaction to treatment was found. The use of L-NOG induced significant changes in the endometrium; the number of glands/mm2 decreased after 6 (p < 0.02) and 10 weeks of use (p < 0.01). Also, the diameter of glands and the occurrence of vacuolated cells decreased significantly (p < 0.02 and p < 0.005, respectively). None of the endometrial parameters or dating was correlated with the ovarian reaction to treatment, indicating independent endometrial effects of L-NOG.     

Dynamic bandwidth allocation for quality-of-service over Ethernet PONs

Ethernet-based passive optical network (EPON) technology is being considered as a promising solution for next-generation broadband access networks due to the convergence of low-cost Ethernet equipment and low-cost fiber infrastructures. A major feature for this new architecture is the use of a shared transmission media between all users; hence, medium access control arbitration mechanisms are essential for the successful implementation of EPON: i.e., to ensure a contention-free transmission and provide end users with equal access to the shared media. We propose to use the multipoint control protocol defined by the IEEE 802.3ah task force to arbitrate the transmission of different users, and we present different dynamic bandwidth allocation (DBA) algorithms to allocate bandwidths effectively and fairly between end users. These DBA algorithms are also augmented to support differentiated services, a crucial requirement for a converged broadband access network with heterogeneous traffic. We show that queueing delays under strict bandwidth allocation algorithms result in an unexpected behavior for certain traffic classes, and we suggest the use of DBA with appropriate local queue management to alleviate this inappropriate behavior. We conduct detailed simulation experiments to study the performance and validate the effectiveness of the proposed protocols.     

BATCH SEQUENCING

Consider the single machine scheduling problem where there are a number of part types to be processed. A part type is defined as follows: Two parts are of the same part type if the machine does not require a setup in between the processing of these parts. The problem investigated in this paper is to find a sequence of batches of parts (if there are any) where all the requirements for parts are met. A heuristic and an exact algorithm are developed, and computational analysis is performed to measure the performance of the heuristic. The time complexity function of the heuristic is O(n²), and the exact algorithm runs in polynomial time given a fixed upper bound on the number of setups.