Mechanical characterization of graphene oxide reinforced epoxy at different strain rates

Strain rate has significant effect on mechanical behavior of the thermoset polymers. The rate sensitivity is more complicated for thermoset nanocomposites, which compose of two quite different types of materials. Nanofiller‐reinforced epoxy resin is widely used in the industry. In the present work, epoxy resin is reinforced by 0.05 to 0.7 wt% nanographene oxide (GO). The strain rate sensitivity of the fabricated nanocomposites is investigated through compressive test carried out at the strain rates of 0.001–1,900 s^?1. The stress–strain curves of the nanocomposites indicated considerable difference between the low‐strain and high‐strain‐rate responses of the specimens. The results showed that the compressive strength of the nanocomposites was improved by more than 100% at high strain rates with respect to the low strain rates. Also, the addition of nano‐GO had influence on compressive strength enhancement but not as significant as the effect of strain rate. It was observed that the effect of GO was less important for higher strain rates. The experimental compressive strength and modulus of elasticity of the nanocomposites were casted in empirical relations for low and high strain rates for various filler weight percentages. Scanning electron microscopy was also used to examine the quality of GO dispersion. POLYM. ENG. SCI., 59:1636–1647 2019. © 2019 Society of Plastics Engineers     

The Effect of Ethanol on Nanostructures of Mixed Cationic and Anionic Surfactants

Micellization of tetradecyl trimethyl ammonium bromide (TTAB) and sodium dodecyl sulfate (SDS) in water–ethanol (ET) micellar solutions, with the weight percent of ET changing within the range 0–30, was studied by means of surface tension and conductivity measurements. Surface tension measurements also provided information about the dependence of the surface excess concentration, the minimum area per surfactant molecule, and the standard Gibbs energy of adsorption on the added weight percent of the organic solvent. Information about the degree of counterion dissociation and phase transition was obtained through conductivity measurements. Cyclic voltammetry (CV) and dynamic light scattering (DLS) was also employed to investigate the mixed micellar behavior of the binary mixtures. It was shown that an excess of cationic surfactant and ET resulted in a phase transition of vesicles and large micelles to mixed micelles. The regular solution theory approximation was used to determine various micellar parameters of ideal systems. The regular solution interaction parameter (β) suggests that the formation of mixed micelles is due to the synergistic interactions in the case of TTAB/SDS systems and becomes affected by the water/ET ratio.     

Rapid Synthesis of Cobalt Metal Organic Framework

Metal-organic framework (MOF) has been shown to potential applications due to the high porous hybrid structure. Cobalt MOF was synthesized rapidly by ultrasound energy with about 3,000 m²/g surface area by BET method. Furthermore, this component is crystalline with significant thermal stability, on account of X-ray diffraction and thermal analysis, respectively. Based on high roughness, crystallinity, and unreported type of FTIR spectrum, a new structure of Co-MOF structure was proposed.     

Synthesis and Characterization of Some Nonionic Bolaamphiphiles

A series of nonionic bolaamphiphiles were synthesized from the reaction of fluoroalkylene (dimercaptoacetates) with maleate crown ethers. Surface activity of the new surfactants was evaluated on the basis of surface tension measurements. The new fluorinated bolamphiphiles exhibit a remarkable lowering of surface tension in comparison with nonfluorinated analogues.     

Current scenario and potential of biodiesel production from waste cooking oil in Pakistan: An overview

Biodiesel utilization has been rapidly growing worldwide as the prime alternative to petrodiesel due to a global rise in diesel fuel demand along with hazardous emissions during its thermochemical conversion. Although, several debatable issues including feedstock availability and price, fuel and food competition, changes in land use and greenhouse gas emission have been raised by using edible as well as inedible feedstocks for the production of biodiesel. However, non-crop feedstocks could be a promising alternative. In this article, waste cooking oils have been recommended as a suitable option for biodiesel production bearing in mind the current national situation. The important factors such as the quantity of waste cooking oil produced, crude oil and vegetable oil import expenses, high-speed diesel imports, waste management issues and environmental hazards are considered. Moreover, process simulation and operating cost evaluation of an acid catalyzed biodiesel production unit are also conducted. The simulation results show that the production cost of waste cooking oil-based biodiesel is about 0.66USD·L^-1. We believe that the present overview would open new pathways and ideas for the development of biofuels from waste to energy approach in Pakistan.     

A Comparative Investigation on Bioactivity and Antibacterial Properties of Sol-Gel Derived 58S Bioactive Glass Substituted by Ag and Zn

Silicon - The bioactive glass systems of xAg2O-SiO2-P2O5-CaO and xZnO-SiO2-P2O5-CaO (x = 2 and 4% mol) were successfully synthesized through sol-gel method. The effect of silver and...     

Fabrication and characterization of electrospun Plantago major seed mucilage/PVA nanofibers

Electrospinning is a well-known technique for producing nanofibers using synthetic and natural polymers like mucilage. In this study, Plantago major Mucilage (PMM) was blended with polyvinyl alcohol (PVA) as a nontoxic adding agent, in order to produce electrospun nanofiber. Electrospinning parameters (voltage, tip-to-collector distance, feed rate, and PMM/PVA ratio) were optimized and solution properties were analyzed. The morphology of nanofibers was investigated using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray diffraction (XRD), and Brunauer–Emmett–Teller (BET). Mechanical strength of nanofibers was determined, and cell viability on nanofibers was discussed by MTT assay. The results of SEM indicated that the PMM/PVA (50/50) nanofibers obtained with average diameter of 250 nm. Viscosity, electrical conductivity, and surface tension of PMM/PVA solution were 550 Cp, 575 μS/cm, and 47.044 mN/m, respectively. FTIR and XRD results verified the exiting PMM in produced nanofibers and no chemical reaction between PMM and PVA. Improvement in mechanical strength and cell viability of nanofibers by adding PMM to PVA nanofibers indicated the potential application of PMM-based nanofibers for medical and food industries. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47852.     

Self-healing semi-IPN materials from epoxy resin by solvent-free furan–maleimide Diels–Alder polymerization

Novel self-healing Diels–Alder (DA) polymer and the corresponding semi-interpenetrated polymer networks (semi-IPNs) were synthesized and characterized. Initially, a furan-functionalized resin (FFR) was synthesized through the ring-opening reaction of a conventional epoxy resin [diglycidyl ether bisphenol A (DGEBA)] with furfuryl alcohol as a bio-based compound. Subsequently, semi-IPNs with different compositions were obtained through the blending of DGEBA, FFR, 4,4′-diaminodiphenylmethane, and 1,1′-(methylenedi-1,4-phenylene) bismaleimide in the molten state by following a predetermined time–temperature program. Fourier transform infrared and nuclear magnetic resonance analyses confirmed the successful synthesis of the materials. Thermoreversibility via retro-DA (rDA) reaction was evidenced by differential scanning calorimetry (DSC) and sol–gel transition tests. Repeated DSC cycle was successfully performed thrice on the DA polyadduct which corroborated repeatability of the DA/rDA association/dissociation. Self-healing and mechanical properties were preliminarily evaluated by scanning electronic microscopy and flexural testing analyses, respectively. The self-healing efficiencies were around 80 and 95% for semi-IPN and DA polyadduct, respectively, based on flexural strength. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48015.     

Tuning gradient microstructures in immiscible polymer blends by viscosity ratio

Bioinspired gradient microstructures provide an attractive template for functional materials with tailored properties. In this study, filaments with gradient microstructures are developed by melt-spinning of immiscible polymer blends. The distribution of the gradient morphology is shown to be controlled by the viscosity ratio of polymers as well as the geometry of the capillary die. Distinct microstructure gradients with long thin fibrils near the surface region and short large droplets near the center region of the filament, as well as the inverse pattern, are formed in systems with different viscosity ratios. The shear flow field in the capillary can elucidate the formation mechanisms of gradient morphologies during processing. The results demonstrate how the features of a gradient microstructure can be tailored by the design of capillary geometry and processing conditions. The viscosity ratio is then introduced as an adjusting tool to control the gradient morphology in a given processing setup. In consequence, this study provides novel design routes for achieving gradient morphologies in immiscible polymers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48165.