Note: Zr(IV)-Immobilized Resin Prepared by Surface Template Polymerization for Fluoride Ion Removal

Abstract

A novel adsorbent Zr(IV)-immobilized resin was prepared to remove fluoride ions from tap water and industrial wastewater. In order to enhance both the kinetics and efficiency, large pathways were formed in the resin for fluoride ion adsorption and the Zr(IV)-phosphate complexes were immobilized on the polymer surface by surface-template polymerization. The Zr(IV)-immobilized resin had a fluoride adsorption capacity of 0.30 mmol/g. The morphology of the Zr(IV)-immobilized resin was evaluated by measuring the specific surface area, pore volume, and pore size distribution. The resin possessed large amounts of large macropores with diameters around 300 nm. The molecular structure at the fluoride adsorption sites was investigated by measuring the amounts of phosphorus, zirconium, and fluoride ion in the resin, and developing a model complex using computational chemistry. On the polymer surface, a fluoride ion/Zr(IV)/dioleyl phosphoric acid complex with an ideal F:Zr:P mole ratio of 3:1:3 could be formed.     

Effects of repeated frying on physicochemical characteristics,oxidative stress,and free radical scavenging potential of canola oil and ghee

The repeated use of cooking oils and ghee for the deep frying of food materials may affect their nutritional quality. The present study evaluated the effect of repeated frying on the physicochemical characteristics and antiradical potential of canola oil and ghee. The oil and ghee were used for frying of fish and chicken for 2, 4, 6, 8, and 10 frying cycles followed by the analysis of physicochemical, oxidative stress, and antiradical parameters. Regression analysis of the data showed a frying cycle-dependent significant linear increase in saponification (R² = 0.9507–0.9748), peroxide and acid values (R² = 0.956–0.9915), and malondialdehyde (MDA) production (R² = 0.9058–0.9557) of canola oil and ghee subjected to fish and chicken frying but exponential increase in saponification value (R² = 0.9778) and MDA production (R² = 0.7407) of canola oil and ghee used for fish frying. The increase in the number of frying cycles linearly decreased the iodine value (R² = 0.9781–0.9924), and 1, 1-diphenyl-2-picrylhydrazyl, hydroxyl, and 2, 2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) radical scavenging potential (R² = 0.9089–0.9979) of canola oil and ghee. Repeated frying in cooking oil and ghee increases oxidative stress and decreases their physicochemical and antioxidant qualities. Canola oil was comparatively more oxidative resistant than canola ghee. The regression equations derived from regression analysis will guide researchers to conduct similar types of univariate studies.     

Microwave-assisted urea-modified sorghum biomass for Cr (III) elimination from aqueous solutions

The present study concentrated on the use of an agro-waste biodegradable sorghum biomass in its simple and modified forms for the binding of Cr (III) ions. A relatively new method of modification was adopted using urea under microwave irradiation. FTIR analysis showed the presence of oxygen and nitrogen bearing functional groups in unmodified (UMS) and modified (MS) sorghum biomass. The appearance of new bands and shifts in the peaks confirmed the modification. The influence of different process parameters such as the adsorbent dose, solution pH, contact time, agitation speed and initial metal ion concentration was studied thoroughly to evaluate optimum conditions for adsorption. Maximum adsorption for Cr (III) ions occurred at pH 5.0–6.0 using UMS and MS. Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherm models in a non-linear fashion were used to explain the phenomenon. Maximum adsorption capacity was 7.03 and 16.36 mg of Cr (III) per gram of UMS and MS, respectively. Adsorption mechanism was explored by pseudo-first- and pseudo-second-order kinetic models, and it was found that the process followed pseudo-second-order kinetics. Thermodynamic study indicated the process favorability. The study concluded that urea modification under microwave irradiation produces a non-toxic and more effective adsorbent for Cr (III) remediation by inducing new nitrogen bearing functional groups to sorghum biomass.     

Acetanilide-loaded injectable hydrogels with enhanced bioactivity and biocompatibility for potential treatment of periodontitis

Chronic periodontitis poses long-term challenges in dentistry, requiring the development of innovative dental composites with biocompatibility, bone regeneration, and antibacterial properties. This study focuses on synthesis of novel injectable thermoresponsive hydrogels composed of chitosan, sodium bicarbonate, bioactive glass (20 and 40% w/w), and acetanilide drug (0.3 and 0.6% w/w). These hydrogels exhibit a sol–gel transition at 37°C, addressing periodontal challenges with reduced gelation time. The smooth flow characteristic was evaluated through 17-22 gauge syringe needles at low temperature. Rheological studies demonstrated pseudoplastic behavior, with viscosity decreasing as shear rate increases. Fourier transform infrared and x-ray diffraction analysis confirmed the bioactivity of hydrogels, forming a bone-like apatite layer in simulated body fluid. The drug-loaded hydrogels demonstrated promising in vitro antibacterial properties against dental pathogens, specifically Staphylococcus aureus and Pseudomonas aeruginosa. Drug dissolution analysis revealed relatively high release rate at 37°C, highlighting its role in rapidly eliminating bacterial colonies at the target site, while the subsequent sustained release contributes to the prevention of infection recurrence. Finally, biocompatibility was assessed with fibroblast, where the cells were observed anchoring into the polymeric chains of hydrogel through extended filopodia.     

Impact of frying on key fatty acid ratios of canola oil

The study was carried out to investigate the changes in saturated (SFA), monoene (MUFA), trans (TFA), and polyunsaturated (PUFA) fatty acids and the key fatty acid ratios (SFA/UFA, cis PUFA/SFA, C18:2/C16:0 and C18:3/C16:0) during potato chips frying in canola oil using single bounce attenuated total reflectance FTIR (SB‐ATR‐FTIR) spectroscopy. The data obtained from GC‐FID were used as reference. The calibration of main fat groups and their key fatty acid ratios were developed by partial least square (PLS) regression coefficients using 4000 to 650 cm^?1 spectral range. FTIR PLS regression for the predicted SFA, MUFA, TFA, and PUFA were found 0.999, 0.998, 0.998, and 0.999, respectively, whereas for SFA/UFA, cis PUFA/SFA, C18:2/C16:0 and C18:3/C16:0 the regression coefficients were 0.991, 0.997, 0.996, and 0.994, respectively. We conclude that FTIR‐PLS could be used for rapid and accurate assessment of changes in the main fat groups and their key fatty acid ratios ratio during the frying process. Practical applications: FTIR‐ATR method is very simple, rapid, and environmentally friendly. No sample preparation is required and one drop of oil is enough for FTIR analysis. The proposed method could be applied for quick determination of key fatty acid ratios in the food processing industry.     

Synthesis of nanoporous Baghdadite by a modified sol-gel method and its structural and controlled release properties

In this research, a bimodal nanoporous Baghdadite (NB) (Ca3ZrSi2O9) was prepared by a modified sol-gel method using P123 as a surfactant. The effects of P123's contents on the structural and textural properties as well as the drug delivery behavior of NB were assessed in vitro. The usage of P123 offered a new route for the synthesis of NB. The synthesized NB samples with different amounts of P123 were studied through X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), N2 adsorption-desorption, field emission scanning electron microscopy (FESEM) equipped with energy-dispersive X-ray analysis spectroscopy (EDAX) and transmission electron microscopy (TEM). The results showed that a single-phase Baghdadite was obtained by this new method at the calcination temperature of 800?°C. It was found that an increase in P123's content up to 0.025?mol changed the morphology of NB samples from mountain-like to needle-like. The potential application of NB samples as drug delivery agents was assessed by estimating their release properties up to 240?h. This research revealed that the synthesized Baghdadite could be used as a potential nanoporous carrier with controlled release capability in bone tissue regeneration.     

Behavior of perfluoropolyalkylethers under simulated dynamic bearing conditions

Perfluoropolyalkylether (PFPAE) fluids are of interest to the United States Air Force as potential high temperature liquid lubricants in gas turbine engines. PFPAE fluids have desirable thermal and oxidative stability, and favorable temperature/viscosity characteristics. However, their performance depends on the specific base fluids, additives, bearing material used as well as contact conditions and environments. Screening tests using a modified ball‐on‐rod type rolling contact fatigue (RCF) tester were conducted to study the effects of the above variables and lubricant circulation on fatigue life, wear and performance of PFPAE. Post test lubricant samples were analyzed for changes in physical and chemical properties. Traditional testing for viscosity, acid number and weight changes was performed. Fluid degradation was studied using Fourier transform infrared spectroscopy (FTIR), gas chromatography with atomic emission detector (GC‐AED) and supercritical fluid chromatography (SFC). Elemental analysis of the deposits formed at the tribocontact were determined by Auger electron spectroscopy (AES). This revised version was published online in July 2006 with corrections to the Cover Date.     

Inhibition of tumor cell kinetics and serum insulin growth factor I levels by octreotide in colorectal cancer patients

BACKGROUND & AIMS: Octreotide was shown to inhibit the growth of colon cancer and to reduce serum concentrations of tumor growth factors such as insulin-like growth factor I (IGF-I) and epidermal growth factor (EGF) in vitro and in animal models. Effects of octreotide on tumor cell kinetics and serum concentration of IGF-I and EGF in patients with colorectal cancer were evaluated. METHODS: Seventy-five patients with colorectal cancer were randomized to receive octreotide (200 micrograms daily) in the 2 weeks before surgery or the usual medications. Samples of tumor tissue were taken at endoscopy and at surgery. [3H]Thymidine labeling index and flow cytometry were used to assess the S-phase fraction. In octreotide-treated patients, plasma levels of IGF-I, EGF, and growth hormone were assessed before and after treatment. RESULTS: There was a statistically significant reduction in the mean percentage of the S-phase fraction as a result of octreotide treatment measured by both [3H]thymidine labeling index (P = 0.001) and flow cytometry (P = 0.001). No reduction in the percentage of the S-phase fraction was observed in the control group patients. Serum values of IGF-I were significantly reduced by octreotide, whereas EGF and growth hormone levels were not affected. CONCLUSIONS: Octreotide reduces the proliferative activity of tumor cells and the serum IGF-I levels in patients with colorectal cancer. This activity may have a role in the treatment of colorectal cancer.     

Numerical study on mechanical and hydraulic behaviour of blast-induced fractured rock

Engineering with Computers - In this research paper, smoothed particle hydrodynamics (SPH) with Johnson Holmquist damage model is adopted for modelling of the blast-induced fractures in Barre...     

A new ElGamal-like cryptosystem based on matrices over groupring

In this paper, we have developed a new ElGamal-like public key cryptosystem based on the matrices over a groupring. The underlying hard problem for this cryptosystem is the conjugacy search problem. That is, we have replaced the exponentiation of elements by conjugacy. This makes the key generation step more efficient. We also talk about different security aspects against known attacks. The proposed scheme is found to be secure against known plaintext attack when encryption uses a different random key for every new plaintext.