The influence of bleeding,extra water and superplasticizer on the SCC plastic shrinkage cracking: case of hot weather

Self-compacting concrete (SCC) is a new material able to be put in place without vibration. However, this advantage is offset by some drawbacks, such as plastic shrinkage, one of the causes of cracking in concrete. Furthermore, the presence of fines absorbs a large amount of water and therefore minimizes bleeding. This paper endeavours to provide a better understanding of the appearance of plastic shrinkage cracking, and to justify his relation with bleeding phenomena. Five SCC formulas with different W/C ratios were prepared and compared to the same range of ordinary concrete (OC) in terms of restrained shrinkage (cracking width). At the same time, a study of cracks’ propagation over time (cracking length) was conducted on the equivalent mortars (mOCe, mSCCe). Mixtures were placed in different hot environmental conditions. The results showed that bleeding significantly reduces cracking length and has no effect on cracking width. In the second part, extra water and superplasticizer was proposed as a solution to prevent SCC cracking and findings show the addition of 10% of water reduces cracking length and a slightly lower addition of superplasticizer reduces SCC’s crack width.     

Characterization of Magnesium‐Doped Hydroxyapatite Prepared by Sol‐Gel Process

Pure and doped hydroxyapatite (HA) nanocrystalline powders (Ca_10‐xMg_x(PO₄)₆OH₂) were synthesized using sol‐gel process. For this, calcium nitrate tetrahydrate, magnesium nitrate hexahydrate, and phosphorous pentoxide were used as precursors for Ca, Mg, and P, respectively. Calculated amounts of magnesium ions (Mg⁺²) especially from 0 to 10% (molar ratio) were incorporated as dopant into the calcium sol solution. The structure and morphology of the gels obtained after mixing the phosphorous and (calcium + magnesium) sol solution were different, and their condensations in time depend on the quantities of magnesium added. The several powders resulting from the gels dried and sintered at 500°C for 1 h were characterized by thermogravimetry (TG), Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), and inductively coupled plasma (ICP). Additionally, their agglomeration, morphology, and particle size were investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The specific surface area of each sample was measured by the Brunauer–Emmett–Teller (BET) gas adsorption technique. The results of XRD, FTIR, and ICP values ranged between 0.45 and 2.11 mg/L indicated that the magnesium added in the calcium solution was incorporated in the lattice structure of HA so prepared, while those obtained by SEM and TEM confirmed the influence of Mg on their morphology (needle and irregular shape) and crystallite size, which is about 30–60 nm. The as‐prepared powders had a specific surface area ranged between 6.37 and 27.60 m²/g.     

Chitosan nanoparticles with controlled size and zeta potential

Optimization of chitosan nanoparticles (ChNs) production process employing a 2^(5–2) fractional factorial design was performed to analyze the influence of viscosity average molecular weight (40–120 kDa), the initial concentration of chitosan (2–5 g/L), the initial tripolyphosphate (TPP) concentration (0.8–1.2 g/L), the ratio chitosan/TPP (4/1–10/1) (V/V), and the stirring speed (300–700 rpm), on final nanoparticles size and zeta potential. The measured responses of average particle size and surface charge were determined on Zetasizer Nano ZS. ChNs were prepared using ionotropic cross-linking of chitosan and TPP and were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), and differential scanning calorimetry (DSC). The experiments showed that the size of synthesized nanoparticles depended on initial concentration and molecular weight of chitosan, TPP concentration and stirring speed within the chosen levels. However, the zeta potential was significantly influenced by chitosan molecular weight, chitosan concentration and stirring speed. The FTIR analysis confirmed the interaction between negative charge of TPP with positive charge of chitosan through the appearance of new peaks at 1222 and 895 cm⁻¹ in produced ChNs. XRD and DSC analysis were used to evaluate the effect of crosslinking of chitosan on crystal structure of ChNs.     

HMDCS-UV: A concept study of Hybrid Monitoring,Detection and Cleaning System for Unmanned Vehicles

This paper proposes a modular system of precision agriculture to automate sprayers, optimizing the application of pesticides through a robotic system based on computer vision and individual nozzle on/off control. The system uses low-cost equipment such as Arduino boards, solenoid valves, pressure and flow sensors, smartphone, webcam, and Raspberry Pi. The motivation is to reduce the amount of pesticides applied in crops, not just for potential savings for the farmers, but also for environment protection issues, as well as for food safety. The system can be used in any crop planted in rows such as onion, soybean, corn, beans, and rice. The results show that our system can detect lines in plantations and can be used to retrofit conventional boom sprayers, so it is an important step to develop a kit capable of upgrade a conventional sprayer to a fully autonomous robotic sprayer even at affordable cost in the context of small and medium size farms.

     

Engineering Next-Generation CAR-T Cells for Better Toxicity Management

Immunoadoptive therapy with genetically modified T lymphocytes expressing chimeric antigen receptors (CARs) has revolutionized the treatment of patients with hematologic cancers. Although clinical outcomes in B-cell malignancies are impressive, researchers are seeking to enhance the activity, persistence, and also safety of CAR-T cell therapy—notably with a view to mitigating potentially serious or even life-threatening adverse events like on-target/off-tumor toxicity and (in particular) cytokine release syndrome. A variety of safety strategies have been developed by replacing or adding various components (such as OFF- and ON-switch CARs) or by combining multi-antigen-targeting OR-, AND- and NOT-gate CAR-T cells. This research has laid the foundations for a whole new generation of therapeutic CAR-T cells. Here, we review the most promising CAR-T cell safety strategies and the corresponding preclinical and clinical studies.