Real-time tracking of CO₂ injected into a subsurface coal fire through high-frequency measurements of the ¹³CO₂ signature

CO? was injected into a coal fire burning at a depth of 15 m in the subsurface in southwestern Colorado, USA. Measurements were made of the 13CO? isotopic signature of gas exhaust from an observation well and two surface fissures. The goal of the test was to determine (1) whether CO? with a distinct isotopic signature could be used as a tracer to identify flow pathways and travel times in a combustion setting where CO? was present in significant quantities in the gases being emitted from the coalbed fire, and (2) to confirm the existence of a self-propagating system of air-intake and combustion gas exhaust that has been previously proposed. CO? was injected in three separate periods. The 13CO? isotopic signature was measured at high frequency (0.5 Hz) before, during, and after the injection periods for gas flowing from fissures over the fire and from gas entering an observation well drilled into the formation just above the fire but near the combustion zone. In two cases, a shift in the isotopic signature of outgassing CO? provided clear evidence that injected CO? had traveled from the injection well to the observation point, while in a third case, no response was seen and the fissure could not be assumed to have a flowpath connected with the injection well. High-frequency measurements of the 13CO? signature of gas in observation wells is identified as a viable technique for tracking CO? injected into subsurface formations in real-time. In addition, a chimney-like coupled air-intake and exhaust outlet system feeding the combustion of the coal seam was confirmed. This can be used to further develop strategies for extinguishing the fire.     

Sea-level rise and its possible impacts given a 'beyond 4°C world' in the twenty-first century

The range of future climate-induced sea-level rise remains highly uncertain with continued concern that large increases in the twenty-first century cannot be ruled out. The biggest source of uncertainty is the response of the large ice sheets of Greenland and west Antarctica. Based on our analysis, a pragmatic estimate of sea-level rise by 2100, for a temperature rise of 4°C or more over the same time frame, is between 0.5 m and 2 m--the probability of rises at the high end is judged to be very low, but of unquantifiable probability. However, if realized, an indicative analysis shows that the impact potential is severe, with the real risk of the forced displacement of up to 187 million people over the century (up to 2.4% of global population). This is potentially avoidable by widespread upgrade of protection, albeit rather costly with up to 0.02 per cent of global domestic product needed, and much higher in certain nations. The likelihood of protection being successfully implemented varies between regions, and is lowest in small islands, Africa and parts of Asia, and hence these regions are the most likely to see coastal abandonment. To respond to these challenges, a multi-track approach is required, which would also be appropriate if a temperature rise of less than 4°C was expected. Firstly, we should monitor sea level to detect any significant accelerations in the rate of rise in a timely manner. Secondly, we need to improve our understanding of the climate-induced processes that could contribute to rapid sea-level rise, especially the role of the two major ice sheets, to produce better models that quantify the likely future rise more precisely. Finally, responses need to be carefully considered via a combination of climate mitigation to reduce the rise and adaptation for the residual rise in sea level. In particular, long-term strategic adaptation plans for the full range of possible sea-level rise (and other change) need to be widely developed.     

Determination of methoxyphenols in ambient atmospheric particulate matter: tracers for wood combustion

Combustion of wood and other biomass fuels produces source-specific organic compounds arising from pyrolysis of lignin, including substantial amounts of 4-substituted methoxylated phenolic compounds (methoxyphenols). These compounds have been used as atmospheric markers to determine the contribution of wood smoke to ambient atmospheric fine particulate matter (PM). However, reliable quantification of methoxyphenols represents an analytical challenge because these compounds are polar, semi-volatile, and somewhat reactive. We reportherein an improved gas chromatographic-mass spectrometric (GC/MS) method for the sensitive and reliable determination of methoxyphenols in low-volume ambient PM samples. Deuterated standard compounds are added to the environmental samples prior to extraction to determine analyte recoveries in each sample. Analytical figures of merit for the assay, as applied to ambient PM2.5 and PM10 samples are as follows: recovery = 63-100%; precision = 2-6%; analytical limit of detection (S/N 2) = 0.002 microg/mL; limit of quantitation = 0.07-0.45 ng/m3 (assuming a 14 m3 sample). The improved method was applied to ambient PM samples collected between 1999 and 2000 in Seattle, WA. Particle-bound methoxyphenol concentrations in the range <0.1 to 22 ng/m3 were observed and the methoxyphenols were present almost exclusively in the fine (PM2.5) size fraction. We also demonstrated that XRF analysis of samples of atmospheric PM collected on Teflon filters significantly reduced the levels of methoxyphenols measured in the PM samples in subsequent assay of the same filters. Therefore, XRF analysis of filters, commonly undertaken to obtain trace element concentrations for use in source apportionment analyses, would preclude the subsequent analysis of those filters for methoxyphenols and other similarly semivolatile or reactive organic chemicals.     

Attachment of Listeria monocytogenes on ready-to-eat meats

Five individual strains of Listeria monocytogenes and a mixed cocktail of all five were studied for attachment on frankfurters, ham, bologna, and roast beef relative to their cell surface characteristics. The ratio of strongly attached (sessile) L. monocytogenes cells compared with total (sessile and planktonic) attached cells on ready-to-eat meats was also determined. Because bacterial cell surfaces were characterized by net negative charge and hydrophobicity, electrostatic interaction chromatography and cationized ferritin methods were chosen to study net negative charge distribution on the bacterial cell surface, whereas hydrophobic interaction chromatography and contact angle measurement were used to examine the cell surface hydrophobicity. No differences (P > 0.05) were observed in cell surface charge or cell surface hydrophobicity among strains. Approximately 84 to 87% L. monocytogenes were found to attach strongly to ready-to-eat meats within 5 min. No differences (P > 0.05) were found among strains or among meats. Micrographs observed from scanning electron microscopy showed no differences among the strains but showed a difference in age of cells (mixed culture) in terms of surface negative charge distribution. More surface negatively charged sites were observed at 0 and 7 days and much fewer at 3 days during storage of washed, harvested cells in buffer at 4 degrees C (aged cells under cold and nutrient deprivation), indicating a possible change in cell surface properties. Because no difference in strains was observed, the contact angle measurement study was carried out with the five-strain mixed culture. The surface hydrophobicity increased in frankfurters, decreased in roast beef, and was unchanged in ham and bologna as a result of inoculation.     

The RelB-BLNK Axis Determines Cellular Response to a Novel Redox-Active Agent Betamethasone during Radiation Therapy in Prostate Cancer

Aberrant levels of reactive oxygen species (ROS) are potential mechanisms that contribute to both cancer therapy efficacy and the side effects of cancer treatment. Upregulation of the non-canonical redox-sensitive NF-kB family member, RelB, confers radioresistance in prostate cancer (PCa). We screened FDA-approved compounds and identified betamethasone (BET) as a drug that increases hydrogen peroxide levels in vitro and protects non-PCa tissues/cells while also enhancing radiation killing of PCa tissues/cells, both in vitro and in vivo. Significantly, BET increases ROS levels and exerts different effects on RelB expression in normal cells and PCa cells. BET induces protein expression of RelB and RelB target genes, including the primary antioxidant enzyme, manganese superoxide dismutase (MnSOD), in normal cells, while it suppresses protein expression of RelB and MnSOD in LNCaP cells and PC3 cells. RNA sequencing analysis identifies B-cell linker protein (BLNK) as a novel RelB complementary partner that BET differentially regulates in normal cells and PCa cells. RelB and BLNK are upregulated and correlate with the aggressiveness of PCa in human samples. The RelB-BLNK axis translocates to the nuclear compartment to activate MnSOD protein expression. BET promotes the RelB-BLNK axis in normal cells but suppresses the RelB-BLNK axis in PCa cells. Targeted disruptions of RelB-BLNK expressions mitigate the radioprotective effect of BET on normal cells and the radiosensitizing effect of BET on PCa cells. Our study identified a novel RelB complementary partner and reveals a complex redox-mediated mechanism showing that the RelB-BLNK axis, at least in part, triggers differential responses to the redox-active agent BET by stimulating adaptive responses in normal cells but pushing PCa cells into oxidative stress overload.     

Self-concept changes of junior high students.

Previous studies have identified a relationship between self-concept and school behavior. The present study investigated whether self-concept (as measured by Bills's Index of Attitudes and Values) and school behavior of problem junior high school students could be changed by participation in a teacher helper program in an elementary school. Ss matched on grade (8th or 9th) sex, and GPA were randomly assigned to an experimental or a control group (n = 12). Self-concept ratings of experimental Ss who participated in the teacher helper program for 8 wks significantly increased during this period, while controls did not change. Neither group changed significantly in attendance or GPA. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

3Desque: interface elements for a 3D graphical user interface

This paper explores some design possibilities and constraints for 3D enhancements of graphical user interfaces (GUIs). This is done with the aim of conveying more information in less screen space, while avoiding visual clutter. Design elements include the use of ‘slapped‐back’ windows obtained by projecting windows and icons into three dimensions; ‘trays’, an alternative to folders or piles; the use of transparent ‘beams’ for indicating hierarchy; and the use of ‘periphs’ for a form of fisheye projection on window borders. In addition we employ shading and shadows to enhance the interface, and automatic placement algorithms to prevent visually confusing occlusion. By considering these approaches together, rather than in isolation, the interactions between the different modifications are made explicit. Copyright © 1999 John Wiley & Sons, Ltd.     

Accelerated publication 16.4% total-area conversion efficiency thin-film polycrystalline MgF2/ZnO/CdS/Cu(In,Ga)Se2/Mo solar cell

This communication reports an MgF₂/ZnO/CdS/Cu(In,Ga)Se₂/Mo/glass polycrystalline solar cell with a confirmed total-area conversion efficiency of 16.4%. the thin-film Cu(In,Ga)Se₂ absorber was fabricated by computer-controlled physical vapor deposition (PVD) from the elemental sources. the resulting absorber has a Gal/In compositional grading that we refer to as a notch. Capacitance-voltage (C-V) measurements also reveal a graded doping profile in the region near the electronic p-n junction. the enhanced device performance is characterized by an open-circuit voltage (V_oc) of 660 mV and a particularly high fill factor (FF) of 78.7%.