Polyphosphazene membranes. I. Solid-state photocrosslinking of poly[(4-ethylphenoxy)-(phenoxy)phosphazene]

Dense films of poly[(4-ethylphenoxy)(phenoxy)phosphazene] (PEPP), a potentially attractive ion-exchange membrane material, were crosslinked to varying degrees using UV light and a photoinitiator. This polymer contained two kinds of substituents: phenoxy groups to be used for possible functionalization (e.g., sulfonation) and ethylphenoxy side-chains for photocrosslinking, where hydrogens at the benzylic carbons could be abstracted by a photoinitiator-leaving macroradicals that after recombination formed covalent bonds. The polyphosphazene polymer was synthesized, mixed with a photoinitiator, shaped into a thin film by solvent casting, and irradiated with UV light for a specified period of time. Benzophenone (BP), was selected as the photoinitiator because it was miscible with poly-phosphazene, had the highest rate of hydrogen abstraction, and absorbed UV light of 365 nm wavelength. The half-life of benzophenone in 50 μm-thick irradiated films was determined to be 20 min. When the BP–PEPP molar ratio was increased from 0 to 0.5, the glass transition temperature increased after irradiation from −8.8 to 53.5°C. At the same time, the equilibrium swelling in dimethylacetamide, at 25°C, decreased from infinity to 0.31. Tensile strength tests of the crosslinked films revealed a nonlinear dependence on BP–PEPP molar ratio. © 1996 John Wiley & Sons, Inc.     

Benefits of optical system diversity for multiplexed image reconstruction

Algorithms that use optical system diversity to improve multiplexed image reconstruction from multiple low-resolution images are analyzed and demonstrated. Compared with systems using identical imagers, systems using additional lower-resolution imagers can have improved accuracy and computation. The diverse system is not sensitive to boundary conditions and can take full advantage of improvements that decrease noise and allow an increased number of bits per pixel to represent spatial information in a scene.     

Modeling ozone and aerosol formation and transport in the pacific northwest with the community Multi-Scale Air Quality (CMAQ) modeling system

The Community Multi-Scale Air Quality (CMAQ) modeling system was used to investigate ozone and aerosol concentrations in the Pacific Northwest (PNW) during hot summertime conditions during July 1-15, 1996. Two emission inventories (El) were developed: emissions for the first El were based upon the National Emission Trend 1996 (NET96) database and the BEIS2 biogenic emission model, and emissions for the second El were developed through a "bottom up" approach that included biogenic emissions obtained from the GLOBEIS model. The two simulations showed that elevated PM2.5 concentrations occurred near and downwind of the Interstate-5 corridor along the foothills of the Cascade Mountains and in forested areas of central Idaho. The relative contributions of organic and inorganic aerosols varied by region, but generally organic aerosols constituted the largest fraction of PM2.5. In wilderness areas near the 1-5 corridor, organic carbon from anthropogenic sources contributed approximately 50% of the total organic carbon with the remainder from biogenic precursors, while in wilderness areas in Idaho, biogenic organic carbon accounted for 80% of the total organic aerosol. Regional analysis of the secondary organic aerosol formation in the Columbia River Gorge, Central Idaho, and the Olympics/Puget Sound showed that the production rate of secondary organic carbon depends on local terpene concentrations and the local oxidizing capacity of the atmosphere, which was strongly influenced by anthropogenic emissions. Comparison with observations from 12 IMPROVE sites and 21 ozone monitoring sites showed that results from the two El simulations generally bracketed the average observed PM parameters and that errors calculated for the model results were within acceptable bounds. Analysis across all statistical parameters indicated that the NW-AIRQUEST El solution performed better at predicting PM2.5, PM1, and beta(ext) even though organic carbon PM was over-predicted, and the NET96 El solution performed better with regard to the inorganic aerosols. For the NW-AIRQUEST El solution, the normalized bias was 30% and the normalized absolute error was 49% for PM2.5 mass. The NW-AIRQUEST solution slightly overestimated peak hourly ozone downwind of urban areas, while the NET96 solution slightly underestimated peak values, and both solutions over-predicted average 03 concentrations across the domain by approximately 6 ppb.     

Development of tumor targeting anti-MUC-1 multimer: effects of di-scFv unpaired cysteine location on PEGylation and tumor binding

MUC1 mucin expressed in epithelial cancer, such as prostate and breast, is aberrantly glycosylated providing unique targets for imaging and therapy. In order to create a broadly applicable construct to target these unique epitopes on metastatic cancer, we selected an antibody fragment (scFv) that binds both synthetic MUC1 core peptide and epithelial cancer cell-expressed MUC1, and developed a recombinant bivalent molecule (di-scFv). Genetically engineered modifications of the di-scFv were constructed to create five molecular versions, each having a free cysteine (di-scFv-c) at different locations for site-specific conjugation. The effects of the engineered cysteine in the varied sites were studied relative to tumor binding and polyethylene glycol-maleimide (PEG-Mal) conjugation (PEGylation). Escherichia coli production as well as binding to MUC1 core peptide, human tumor cell lines and human tumor biopsies, were comparable. However, the location of the engineered cysteine in these di-scFv-c did influence PEGylation efficiency of this free thiol; higher PEGylation efficiency occurred with this cysteine in the inter-scFv linkage. Di-scFv-c PEG, with the cysteine engineered after the fifth amino acid in the linker, was used as an example to demonstrate comparable antigen-binding to non-PEGylated di-scFv-c. In summary, novel anti-MUC1 di-scFv-c molecules can be efficiently produced, purified and conjugated by site-specific PEGylation without loss of immunoreactivity, thus providing flexible multidentate constructs for cancer-targeted imaging and therapy.     

Emotional Textiles: An Introduction

Abstract

This special issue brings together material culture and the history of emotions to explore the emotive properties of textiles in Northwest Europe from the seventeenth to the early twentieth centuries. It is the first detailed study of the changing emotional meanings of a particular type of material - textiles - from the metallic lace adorning christening robes, to union cloth burial clothes. The six articles are contributed by historians and museum professionals from a range of disciplines. These authors harness a variety of sources and methodologies to interrogate the emotional repertoire of textiles, and the emotive process of research itself.     

Investigation of chemical rinses suitable for very small meat plants to reduce pathogens on beef surfaces

Numerous antimicrobial interventions are capable of reducing the prevalence of harmful bacteria on raw meat products. There is a need to identify effective and inexpensive antimicrobial interventions that could, in practice, be used in very small meat plants because of limited financial, space, and labor resources. Eight antimicrobial compounds (acetic acid, citric acid, lactic acid, peroxyacetic acid, acidified sodium chlorite, chlorine dioxide, sodium hypochlorite, and aqueous ozone) were applied at various concentrations with small, hand-held spraying equipment, and bactericidal effectiveness was examined. Beef plate pieces were inoculated with fecal slurry containing a pathogen cocktail (Escherichia coli O157:H7, Salmonella Typhimurium, Campylobacter coli, and Campylobacter jejuni) and natural populations of aerobic plate counts, coliforms, and E. coli. Antimicrobial solutions were applied to beef surfaces via a portable, pressurized hand-held spray tank, and treated surfaces were subjected to appropriate methods for the enumeration and isolation of pathogens and hygiene indicators. Relative antimicrobial effectiveness was determined (from greatest to least): (i) organic acids, (ii) peroxyacetic acid, (iii) chlorinated compounds, and (iv) aqueous ozone. Using the equipment described, a 2% lactic acid rinse provided 3.5- to 6.4-log CFU/cm(2) reductions across all bacterial populations studied. Conversely, aqueous ozone yielded 0.02- to 2.9-log CFU/cm(2) reductions in pathogens and hygiene indicators, and did not differ significantly from a control tap water rinse (P = 0.055 to 0.731). This 2% lactic acid rinse will be subsequently combined with a previously described water wash to create a multistep antimicrobial intervention that will be examined under laboratory conditions and validated in very small meat plants.     

The Department of Health perspective on handling uncertainties in health sciences

Recognizing and working with uncertainty in handling risk are part of both clinical practice and the policy-making process. The Department of Health recognizes the inherent challenges that uncertainty brings and employs a wide range of research mechanisms, drawing on a diverse set of disciplines, to provide an evidence base to inform both policy creation and implementation, and clinical practice. This paper describes a variety of situations and the Government response to them, each time highlighting the use of science to reduce unknowns and to support decision-making. It highlights the need for a strong research infrastructure to support the Department's requirements, and those of the NHS, both in real time to respond to emergencies and to establish a high standard of care. However, although science provides a powerful tool to reduce uncertainty, it will not always produce definitive answers and often provides the start point for a dialogue between decision makers and researchers.     

Time-variable simulation of soil vapor intrusion into a building with a combined crawl space and basement

A time-variable one-dimensional model (called ViM for Vapor Intrusion Model)to predict indoor vapor concentrations in a dwelling with a combined basement and crawl space has been developed. ViM predicts vapor concentrations in each of the three compartments. Volatile chemicals that intrude into the dwelling are assumed to originate from soil, groundwater (where an attenuating plume is simulated), or ambient air. Processes included in the model are advection, diffusion, biodecay, and adsorption in the soil column; transport by diffusion and advection into individual crawl space and basement compartments; advection from each compartment into an overlying dwelling space; and exchange of ambient air and indoor air. The time-variable concentration fields are solved by first transforming the partial and ordinary differential equations into Laplace space, solving the resulting ordinary differential equations or algebraic equations, and numerically inverting those equations. This approach was an expedient way of handling the coupling between the subsurface and the dwelling. ViM was applied to a building (Building 20) located at the former Moffett Field Naval Air Station, in Mountain View, CA. The building is a former bachelor officer's quarters. The shallow groundwater beneath the building is contaminated with a number of volatile chemicals, including trichloroethene, cis-1,2-dichloroethene, and trans-1,2-dichloroethene, all of which were simulated. Using indoor air data collected in 2003-2004, and other field data collected prior to that time, the accuracy of the model's predictions was demonstrated. ViM's results were also compared against a version of the steady-state Johnson and Ettinger model (1) that was modified to accommodate a dwelling with a combined crawl space and basement (called the JEM model in this paper). The predictions from the JEM model were consistently higher than the predictions from ViM, but still near the upper range of the observed data.     

Reduction and survival of Listeria monocytogenes in ready-to-eat meats after irradiation

A five-strain Listeria monocytogenes culture was inoculated onto six different types of ready-to-eat (RTE) meats (frankfurters, ham, roast beef, bologna, smoked turkey with lactate, and smoked turkey without lactate). The meats were vacuum packed and stored at 4 degrees C for 24 h prior to irradiation. Populations of L. monocytogenes were recovered by surface plating on nonselective and selective media. The margins of safety studied include 3-log (3D) and 5-log (5D) reduction of pathogenic bacteria to achieve an optimal level of reduction while retaining organoleptic qualities of the meats. A 3-log reduction of L. monocytogenes was obtained at 1.5 kGy when nonselective plating medium was used. The dosages for 3-log reduction were 1.5 kGy for bologna, roast beef, and both types of turkey and 2.0 kGy for frankfurters and ham on the basis of use of selective medium. The D10-values ranged from 0.42 to 0.44 kGy. A 5-log reduction of L. monocytogenes was obtained at 2.5 kGy with nonselective medium. With selective medium, the dosages were 2.5 kGy for bologna, roast beef, and both types of turkey and 3.0 kGy for frankfurters and ham. Survival of L. monocytogenes in the same RTE meat types after irradiation was also studied. Meats were inoculated with 5 log L. monocytogenes per g and irradiated at doses of 2.0 and 4.0 kGy. Recovery of the surviving organisms was observed during storage at temperatures of 4 and 10 degrees C for 12 weeks. Preliminary results showed no growth in meats irradiated at 4.0 kGy. Survivors were observed for irradiated meats at 2.0 kGy stored at 10 degrees C after the second week. No growth was observed in samples irradiated at 2.0 kGy stored at 4 degrees C until the fifth week.     

Design and synthesis of conformationally constrained cyclophilin inhibitors showing a cyclosporin-A phenotype in C. elegans

Cyclophilin A (CypA) is a member of the immunophilin family of proteins and receptor for the immunosuppressant drug cyclosporin A (CsA). Here we describe the design and synthesis of a new class of small-molecule inhibitors for CypA that are based upon a dimedone template. Electrospray mass spectrometry is utilised as an initial screen to quantify the protein affinity of the ligands. Active inhibitors and fluorescently labelled derivatives are then used as chemical probes for investigating the biological role of cyclophilins in the nematode Caenorhabditis elegans.