A modelling framework to support design of complex engineering systems in early design stages

Production, assembly or logistic systems exist in widespread domains. It is agreed that more than 50% of life-cycle performance, costs and environmental impacts of such systems are due to those decisions that are made in their early design stages (Reich, Res Eng Design 28(4):411–419, https://doi.org/10.1007/s00163-017-0270-7, 2017). However, the large scale and multi-disciplinary essence of such systems make their design considerably challenging. Most of the design approaches follow a sequential approach such that the design in each lower level is finalized/frozen before proceeding to the next level. However, such approaches do not properly address the interaction between different design disciplines which may later lead to design inconsistencies. Therefore, this paper aimed to propose a modelling framework that allows having an integrated approach in the early design stages of such systems. To this end, first the framework prescribed developing an executable meta-architecture that can embody all the design requirements. Second, the framework describes the interconnections between the meta-architecture with certain supporting algorithms and optimization models. This allows generating and simulating different design alternatives and observing the impact of different design decisions on system integrated performance. Therefore, the proposed framework with its providing outcomes can be used to support the decision making in early design stages of such systems. The framework is applied in a real case study from the warehousing domain, which serves to show the practical application of the proposed framework.     

Process cycle optimization in press forming of paperboard

Three‐dimensional forming of paperboard is commonly done by a press forming process, which has been widely researched. However, the process cycle of the press forming of paperboard trays has not yet been completely optimized due to limited adjustability and unsophisticated mechanical structure of commonly used forming equipment. The object of this study is to optimize the force curve of stroke to improve product quality without compromising the production rate using LUT Adjustable Packaging Line prototype for practical evaluation of formability and multibody dynamics software MSC Adams for simulation. Several process parameters were investigated with different process cycles to study their effect on the quality of the formed products. With optimized male mould speed, acceleration and speed of the blank could be reduced, which led to significantly reduced rupturing tendency without compromising the production speed. It was also found that a constant blank holding force should be used to achieve acceptable tray quality, although this results in a significantly increased surface pressure applied to the formed substrate. It was also discovered that a novel male mould attachment, which included a pressing force adjustment system that utilized a spring set with an adjustable preload, made it possible to control the force distribution between different forming tools during the dwelling phase of the process cycle in an improved way. Utilization of the method used in this paper leads to a better tray quality without compromising the production efficiency. Furthermore, this can increase the number of possible package applications for sustainable materials, such as paperboard.     

Adhesion, spreading and osteogenic differentiation of mesenchymal stem cells cultured on micropatterned amorphous diamond, titanium, tantalum and chromium coatings on silicon

It was hypothesized that human mesenchymal stromal cell (hMSC) can be guided by patterned and plain amorphous diamond (AD), titanium (Ti), tantalum (Ta) and chromium (Cr) coatings, produced on silicon wafer using physical vapour deposition and photolithography. At 7.5 h hMSCs density was 3.0–3.5× higher (P < 0.0003, except Ti) and cells were smaller (68 vs. 102 μm, P 0.000006–0.02) on patterns than on silicon background. HMSC-covered surface of the background silicon was lower on Ti than AD patterns (P = 0.015), but at 5 days this had reversed (P = 0.006). At 7.5 h focal vinculin adhesions and actin cytoskeleton were outgoing from pattern edges so cells assumed geometric square shapes. Patterns allowed induced osteogenesis, but less effectively than plain surfaces, except for AD, which could be used to avoid osseointegration. All these biomaterial patterns exert direct early, intermediate and late guidance on hMSCs and osteogenic differentiation, but indirect interactions exist with cells on silicon background.     

Fundamental mechanisms of bonding of glass fiber reinforced polymer reinforcement to concrete

Fundamental mechanisms of bonding between glass fiber reinforced polymer (GFRP) bar and concrete are presented. Contributions from chemical bonding, bearing resistance, and frictional resistance to bond were delineated by measuring the following: the load corresponding to complete debonding of the bar, the load corresponding to onset of sliding and pullout of the bar along the entire embedment length, and the frictional load corresponding to frictional resistance to sliding. Research findings indicate that while chemical bonding was the main contributor to the interfacial bond strength, the other two mechanisms contributed to the pullout strength of the bar. Correlation between the bar’s surface geometry and the contributions from the three mechanisms are discussed.     

Evaluation du transport solide et de l’envasement dans le bassin versant de Siliana (Tunisie): cas des barrages Siliana et Lakhmess

The evaluation of the sediment transport and the silting in the artificial dam installed on the Siliana river (Tunisia) has been obtained using direct and indirect methods through the qualitative and quantitative study of the erosive phenomena existing in the subtended catchment area and the sedimentation entity accumulated on the dam’s reservoir. The study area, which extends approximately 1036 km², is mainly composed of quaternary alluvial deposits (clay, sandy clay, gravels, limestone). The relief is almost flat (600 meters of altitude), dominated by the presence of mountains of the Tunisian dorsal (the most elevated are: Jebel Bargou, Jebel Sardj). The dominant climate is the semi arid one. The study area is among the zones which are mainly concerned by several erosion phenomena in Tunisia. The indirect evaluation of the lands erodibility of the catchment area has been obtained through the application, with the aid of geo-informatics technologies, of two previsional models: the Quantitative Geomorphological Analysis and the PISA model. The obtained results, for the total Siliana catchment and for Lakhmess sub-catchment, allowed to estimate the entity and the variability of lands erodibility on the basis of some representative factors of the physico-climatic conditions that characterize the study area. The direct measurement of the sediment volumes present in the Siliana dam’s reservoir, has allowed to quantify the effective entity of silting of the same reservoir. The latter, obtained through a bathymetric relief has turned out equal to 14.66 10⁶ m³, to which corresponds a medium erodibility, pertinent to the entire catchment area, of 1322 t/km²/year. The comparison of such value with those obtained from the two indirect applied models has shown, at least for the studied area, the better suitability of the Quantitative Geomorphological Analysis as an instrument of indirect evaluation of the erosion entity in Lakhmess catchment and the PISA model as a good model for estimating the siltation on Siliana dam. The quantitative data obtained from this study, with the qualitative information shown in the numerous thematic charts realized, relative to the various physico-environmental characters of the catchment area, represent an adapted base, to which it will be possible to make reference to the manager responsible for the administration of the dam so as to realize the pertinent and necessary interventions of hydraulic management and soil conservation which are required for the protection of the water resource of the dam.     

The effects of lead on the electrochemical and adhesion behavior of zinc electrodeposits

The presence of excessive lead in zinc sulfate electrolytes can lead to problems related to both processing efficiency and the properties of the metal produced. For example, poor adhesion can occur in electrogalvanized steel when it is heated in the temperature range of 215 °C to 280 °C if lead is present in the deposit. The duration of heating necessary to induce the peeling of the zinc was found to be dependent on the temperature, time, and concentration of lead in the electrolyte and the plating parameters. The presence of lead slowed the formation of the intermetallic, and the peeling occurred between the zinc and the iron-zinc intermetallic layer. In order to gain a better fundamental understanding of the role of lead, rotating disc electrodes were used to measure the diffusion coefficient of lead in the zinc sulfate electrolyte. The experimentally determined mass transport data on lead can be used as an aid to set an acceptable limit of lead allowable in the electrolyte or to evaluate the electrochemical characteristics of an electrolytic zinc system. By the addition of strontium carbonate to the plating solution followed by filtration, the lead concentration in the electrolyte could be reduced to an acceptable level, preventing the poor adhesion on heating.     

CORRELATIONS FOR ESTIMATING THE DIFFUSIVITIES OF NITROUS OXIDE IN AQUEOUS SOLUTIONS OF DIETHANOLAMINE AND N-METHYLDIETHANOLAMINE AND THE SOLUTION DENSITIES AND VISCOSITIES

Experimentally measured diffusion coefficients of nitrous oxide in water, aqueous solutions of diethanolamine, aqueous solutions of N-methyldiethanolamine, and aqueous blends of diethanolamine and N-methyldiethanolamine have been used to arrive at a modified Stokes-Einstein correlation by using nonlinear least-squares filling. The average deviation of this correlation from the experimentally measured diffusion coefficients is about 13%. Comparisons are also made to the estimated diffusivities of nitrous oxide in the amine solutions which are obtained from the Wilke-Chang and Hayduk-Minhas correlations. The average deviations of the Wilke-Chang and Hayduk-Minhas correlations from the measured values are about 13% and 19%, respectively. Correlations were also presented for estimating the solution densities and viscosities. Predicted values for the solution densities and viscosities from these correlations deviate from experimentally measured values on average by 1.2% and 4.8% respectively.     

Location-Aided Handover in Heterogeneous Wireless Networks

The concept of being always online, regardless of the time and place, has been one of the hot topics in the commercial and scientific forums during the last years. The term itself is not solidly defined, however it is often used to refer to user's ability to get the same services via changing variety of underlying networks. In order to really work, this kind of multiaccess in heterogeneous networks still requires research, technological achievements and even compromises. The key to successfully implement the multiaccess is vertical handover that allows the application services to be seamlessly transferred between different networks.     

Motorcycle riding under the influence of alcohol: Results from the SARTRE-4 survey

Riding a motorcycle under the influence of alcohol is a dangerous activity, especially considering the high vulnerability of motorcyclists. The present research investigates the factors that affect the declared frequency of drink-riding among motorcyclists in Europe and explores regional differences. Data were collected from the SARTRE-4 (Social Attitudes to Road Traffic Risk in Europe) survey, which was conducted in 19 countries. A total sample of 4483 motorcyclists was interviewed by using a face-to-face questionnaire. The data were analyzed by means of multilevel ordered logit models. The results revealed significant regional differences (between Northern, Eastern and Southern European countries) in drink-riding frequencies in Europe. In general, declared drinking and riding were positively associated with gender (males), increased exposure, underestimation of risk, friends’ behaviour, past accidents and alcohol ticket experience. On the other hand, it was negatively associated with underestimation of the amount of alcohol allowed before driving, and support for more severe penalties.     

Influence of sintering temperature on secondary phases formation and microwave dielectric properties of Ca2Ce2Ti5O16 ceramics

Ca₂Ce₂Ti₅O₁₆ dielectric ceramics prepared by conventional solid-state ceramic route was investigated. Phase composition and microwave dielectric properties were measured using XRD and Vector network analyzer, respectively. XRD analysis of the calcined and sintered samples revealed the formation of CeO₂ and another unidentified phase (that vanished at ? 1400 °C) as secondary phases along with the parent Ca₂Ce₂Ti₅O₁₆ phase. The amount of the parent Ca₂Ce₂Ti₅O₁₆ phase increased with increasing sintering temperature from 1350 °C to 1450 °C accompanied by a decrease in the apparent density. The density decreased but ? _r and Q _u f _o increased with sintering temperature. An ? _r ～ 81.5, Q _u f _o ～ 5915 GHz and τ _f ～ 219 GHz were achieved for the sample sintered at 1450 °C.