Chemicothermal treatment of 5KhNM die steel

Conclusions Of all of the tested forms of hardening with chemicothermal treatment single-phase boriding and chrome-vanadizing provide the best combination of service properties of 5KhNM steel.Kemerovo Technological Institute for the Food Industry. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 7–8, May, 1991.     

Continuous-wave lasing of single-mode metamorphic quantum dot lasers for the 1.5-μm spectral region

Lasers based on InAs/InGaAs quantum dots grown on metamorphic (In,Ga,Al)As layers deposited by MBE on GaAs substrates exhibited emission near 1.5 μm with a differential quantum efficiency of about 50%. The narrow-stripe lasers operate in a single transverse mode and withstand continuous current density above 20 kA cm^?2 without significant degradation. A maximum continuous-wave output power of 220 mW is obtained. Neither current nor beam filamentation was observed up to the highest pumping levels.     

Influence of ash deposits on the heat resistance of materials for gas turbine engine blades

Leningrad. Translated from Problemy Prochnosti, No. 1, pp. 71–76, January, 1989.     

自适应抗干扰系统在引信中的应用

为了提高无线电引信的抗干扰性能,研究以自适应天线技术为基础的引信抗干扰系统.根据信号与干扰的具体环境,灵活地控制天线的参数,自动调节方向图,使其零点自适应地对准干扰方向,以实现在空间上对信号的最佳接收和对干扰的有效抑制.     

Refractories for handling steel outside a furnace

A range of refractories is presented for handling steel outside a furnace, which are produced by the Borovichi Refractories Corporation. The refractory characteristics and working features are given. Translated from Novye Ogneupory, No. 9, pp. 29–35, September, 2008.     

Highly resistant dispensing nozzles based on zirconium dioxide for profiled CBCM. Part 1. Structure and physicomechanical properties of materials based on zirconium dioxide for producing CBCM dispensing nozzles

Technology is developed for preparing refractory components made of partially stabilized zirconium dioxide using an isostatic compaction press. Technology is provided for manufacturing dispensing nozzles using combined and separately stabilized zirconium dioxide, and also indices of the refractories obtained and imported materials are compared. __________ Translated from Novye Ogneupory, No. 3, pp. 127–131, March 2008.     

Influence of the preparation conditions on the size and morphology of nanocrystalline lanthanum orthoferrite

Nanocrystalline LaFeO₃ is prepared by the dehydration of coprecipitated lanthanum and iron(III) hydroxides. It is shown that the behavior of the samples during heating and the size distribution of LaFeO₃ nanocrystals can be considerably different depending on the scheme used for coprecipitation of lanthanum and iron hydroxides; independently of the method employed for coprecipitation of the initial compounds, sintering of the samples at 950°C leads to the formation of lanthanum orthoferrite crystals up to 100 nm in size.     

Refractory objects and materials for continuous steel casting

In the OAO Borovich Refractory Combine production has been assimilated for a complete set of refractories for continuous steel casting, i.e. from a pipe for protecting a stream of metal to a submerged nozzle. In technical and life characteristics the products correspond to that of world analogs, they provide accident free steel pouring, make it possible to reduce the specific consumption of refractories per ton of steel, to increase CBCM productivity, to reduce billet scrap, and to reduce steel cost. Translated from Novye Ogneupory, No. 8, pp. 4–9, August 2008.