A facile antistatic modification of polyester fiber based on ion-exchange reaction of sulfonate-modified polyester and various cationic surfactants

A new technique for imparting antistatic properties to poly(ethylene terephthalate) (PET) fiber has been developed. In this technique, blend polyester fibers containing poly(ethylene terephthalate/5-sulfoisophthalate) (SIP-PET) were prepared by blend spinning and then treated with various cationic surfactants in the process of dyeing. The surfactants could effectively be immobilized on the fiber as the counter cations of the sulfonate groups of the 5-sulfoisophthalate (SIP) units and aid the release of static electrons formed in the fiber. Thus, the half-life time (t_1/2) of leakage of static charge and the surface resistivity (Rs) of the blend PET fibers became much lower after treating. The best result was obtained with a methylated quaternary ammonium salt of a stearylamine-ethylene oxide (EO) adduct or hydrochloride of a laurylamine-EO adduct as the surfactant of which the number of EO units was around ten. Even after five washing cycles the t_1/2 value of the fibers treated with these surfactants was kept lower than 30 s with the Rs value maintained in the order of 10¹³ Ω cm^-2. Therefore, the present technique could be useful for practical production of polyester fibers with “semi-permanent” antistatic properties which can be recovered by re-treatment even if they were lost.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.     

Crosslinked acrylic pressure‐sensitive adhesives. II. Effect of humidity on the crosslinking reaction

The effect of humidity during storage on the crosslinking reactions of isocyanate groups was investigated with attenuated total reflectance Fourier transform infrared spectroscopy with pressure‐sensitive adhesives composed of poly[ethyl acrylate‐co‐(2‐ethylhexyl acrylate)‐co‐(2‐hydroxyethyl methacrylate)] as a base resin and polyisocyanate as a crosslinker. A peak‐resolving analysis of the amide II region revealed four bands. According to an analysis of the Fourier transform infrared spectra of the model compounds, these four bands were assigned to free urethane linkages, hydrogen‐bonded urethane linkages, free urea linkages, and hydrogen‐bonded urea linkages. As expected, storage under humid conditions led to the formation of free and hydrogen‐bonded urea linkages corresponding to the promotion of isocyanate consumption. Peak resolution of the amide II region was found to be a reasonable way of monitoring urethane and urea linkages during crosslinking reactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3039–3045, 2003     

Generation of disk-like domains with nanometer scale thickness in merocyanine dye LB film induced by hydrothermal treatment

We have characterized the binary LB films of merocyanine dye (MS) and arachidic acid (C₂₀) before and after hydrothermal treatment (HTT), which is defined as a heat treatment under relative humidity of 100%, focusing on the morphology studied by bright field (BF) microscopy and fluorescence (FL) microscopy. BF microscopy observation has revealed that the as-deposited MS-C₂₀ binary LB film is found to emit intense red fluorescence over the whole film area by 540-nm excitation. Since the surface image is almost featureless, it is considered that the crystallite sizes of J-aggregate are less than 10 μm. Interestingly, after HTT, round-shaped domains are observed in the LB systems, and the sizes are reaching 100 μm in diameter. Crystallites of J-aggregate, which are bluish in color and emit intense red fluorescence, tend to be in the round domains. We have observed two different types of domains, i.e., blue-rimmed domains and white-rimmed domains, which are postulated to be confined in the inner layers and located at the outermost layer, respectively. The thickness of the domains is equal to or less than that of the double layer of the MS-C₂₀ mixed LB film, which is ca. 5.52 nm. The molecular order of MS in the J-aggregate is improved by the HTT process leading to the significant sharpening of the band shape together with the further red shift of the band (from 590 to 594 nm up to 597 to 599 nm). The reorganized J-band is considered to be ‘apparently’ isotropic owing to the random growth of the J-aggregate in the film plane. We consider that the lubrication effect by the presence of water molecules predominates in the HTT process.     

Oxygen Uptake and Release Mechanism of Lithium Manganese Ferrite in the Low Temperature Range of 573–773 K

Oxygen uptake and release of (Li,Mn) ferrite [LMF; (Li_0.60Mn_1.20Fe_1.20)_1−δO₄; δ= 0.007 to 0.033] was investigated concerning the relations between redox reactions of ferrite and cation migration. Mössbauer spectroscopy and X-ray diffractometry showed that some of the Li⁺ and Fe³⁺ ions migrated from the A sites to the B sites of the spinel-type structure and Mn⁴⁺ ions migrated from the B sites to the A sites during oxygen uptake at 573 K. The cation-deficient LMF formed by the oxygen uptake released oxygen molecules in He gas only at 660 K. The cation migration during the oxygen release was in the opposite direction of the movement during oxygen uptake at 573 K.     

Hydrothermal conversion of FAU zeolite into aluminous MTN zeolite

The hydrothermal conversion of FAU zeolite into aluminous MTN zeolite is described here. In the presence of both benzyltrimethylammonium hydroxide (BTMAOH) and sodium chloride (NaCl) the highly crystalline and pure MTN zeolites with Si/Al ratios of 21-23 could be obtained from the hydrothermal conversion of FAU zeolite. Based on powder XRD refinement and ¹³C CP/MAS NMR spectra, BTMA⁺ ions were not present in cages of the obtained zeolites, but TMA⁺ ions existed instead. It means that BTMAOH underwent degradation during the conversion. Moreover, the effects of Si/Al ratio of starting FAU zeolite, synthesis parameters (BTMAOH/SiO₂ and H₂O/SiO₂ ratios) and the addition of alkali metal chlorides on the hydrothermal conversion of FAU zeolite into MTN zeolite are discussed. As compared to amorphous SiO₂/γ-Al₂O₃, which produced impurity, the hydrothermal conversion of FAU zeolite showed a fast crystallization rate and a high selectivity to MTN zeolite formation. These phenomena indicate that the assembly of locally ordered aluminosilicate species coming from the decomposition or dissolution of FAU zeolite should be taking part in the conversion process.     

AI-Li/SiCp composites and Ti-AI alloy powders and coatings prepared by a plasma spray atomization (PSA) technique

There has been increasing use of Al-Li alloys in the aerospace industry, due mainly to the low density and high elastic modulus of this material. However, the problem of low ductility and fracture toughness of this material has limited its present application to only weight- and stiffness-critical components. Development of Al-Li/ceramic composites is currently being investigated to enhance the service capabilities of this material. The Ti-Al alloy is also of interest to aerospace-type applications, engine components in particular, due to its attractive high-temperature properties. Preparation of fine powders by plasma melting of composite feedstock and coatings formed by plasma spraying was carried out to examine the effect of spray parameters on the microstructure and properties of these materials. Characterization of the powders and coatings was performed using the scanning electron microscope and image analyzer. Examination of the plasma-sprayed powders and coatings has shown that in the Al-Li/SiC composite there is melting of both materials to form a single composite particle. The SiC reinforcement was in the submicron range and contributed to additional strengthening of the composite body, which was formed by a cold isostatic press and consolidated by hot extrusion or hot forging processes. The plasma-sprayed Ti-Al powder showed four categories of microstructures: featureless, dendritic, cellular, and martensite-like.     

Photocatalytic decomposition of 2-propanol in air by mechanical mixtures of TiO2 crystalline particles and silicalite adsorbent: The complete conversion of organic molecules strongly adsorbed within zeolitic channels

Fundamental photocatalytic behaviors were investigated for mechanical mixtures of TiO₂ crystalline particles (P25) and MFI type zeolite (silicalite) in the decomposition reaction of 2-propanol vapor in air for the first time. Mechanical mixing enables reliable comparisons to be made between photocatalysts because the contents of TiO₂ and the adsorbent can be widely varied (51 times in this study) while keeping the particle size and crystallinity of TiO₂ unchanged. That is, the use of mechanical mixture highlights the behavior of molecules adsorbed in the microporous crystals, keeping the TiO₂ unchanged. In the case of the mixed photocatalysts, the initial 2-propanol concentration in the gas phase was significantly reduced because of adsorption into the zeolite. After photo-irradiation started, 2-propanol was decomposed to CO₂ with no (or trace amount of) acetone detected in the gas phase. The analysis of final amount of CO₂ formed by the decomposition demonstrated that just by the mechanical mixing of TiO₂ and zeolite, the TiO₂ photocatalyst decomposed completely the reactant and intermediate molecules strongly adsorbed into the zeolite. On the other hand, in reference experiments in which TiO₂ and zeolite were not mixed and were separately placed in a photoreactor, the organic compounds strongly adsorbed in the zeolite could not be decomposed to CO₂ by the photocatalyst. It is notable that the CO₂ formation rates for the mixed photocatalysts were mostly constant for those comprising 40 wt% or larger amounts of zeolite, while being slower than for pure TiO₂. The rate-determining step was discussed based on these data. The present study showed that the mixed photocatalyst could remove organic vapors by adsorption in the dark and decompose completely to CO₂ at moderate reaction rates under photo-irradiation with minimized evolution of intermediate molecules into the gas phase.     

Application of a Two-Dimensional Computer Simulation to Cake Growth in Slip Casting with Complicated-Shape Gypsum Molds

A two-dimensional computer simulation method, developed by the authors using the method of finite differences, was applied to estimate the cake growth in slip casting of alumina with a triangular gypsum mold and a box-type gypsum mold with a convex bottom. The cake growth patterns, water penetration patterns, water flow rate distributions, and pressure distributions were simulated in the molds and/or cakes. The simulated cake growth patterns were in good agreement with those observed experimentally in both molds. Moreover, the cake growths could be well understood from the results of the water flow rate distributions in each case. The present method is applicable to cake growth simulation in slip casting with complicated-shape gypsum molds.     

CNT-PyC-SiC/SiC double-layer oxidation-protection coating on C/C composite

CNT-PyC-SiC/SiC double-layer coatings were prepared by growth of CNTs on C/C followed by pyrolytic carbon deposition and SiC deposition. The microstructure and the oxidation behavior of the coatings were investigated. With increasing PyC amount in the coating, the coating showed fewer cracks and a higher oxidation resistance and thermal shock resistance. CNT-PyC played a role in improving the bonding strength between C/C and coatings, alleviating stress in SiC coating and decreasing the cracks.