Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

Levels of Vibrio parahaemolyticus and thermostable direct hemolysin gene-positive organisms in retail seafood determined by the most probable number-polymerase chain reaction (MPN-PCR) method

The incidence and levels of Vibrio parahaemolyticus and thermostable direct hemolysin gene (tdh)-positive organisms in retail seafood were determined. The most probable number-polymerase chain reaction (MPN-PCR) method using a PCR procedure targeting the species-specific thermolabile hemolysin gene (tlh) and tdh was used to determine the levels of V. parahaemolyticus and tdh-positive organisms, respectively. In seafood for raw consumption, V. parahaemolyticus was found in four (13.3%) of 30 fish samples, 11 (55.0%) of 20 crustacean samples, and 29 (96.7%) of 30 mollusc samples. Levels of V. parahaemolyticus were below 10(4) MPN/100 g in all fish and crustacean samples tested. However, they were above 10(4) MPN/100 g in 11 (36.7%) of the 30 mollusc samples. In all seafood for raw consumption, the level of tdh-positive organisms was below the limit of detection (< 30 MPN/100 g). In seafood for cooking, V. parahaemolyticus was found in 15 (75.0%) of 20 fish samples, nine (45.0%) of 20 crustacean sample, and 20 (100%) of 20 mollusc samples. Levels of V. parahaemolyticus were above 10(4) MPN/100 g in only three (15.0%) and one (5.0%) of the 20 fish and 20 crustacean samples, respectively. However, they were above 10(4) MPN/100 g in 18 (90.0%) of the 20 mollusc samples. In seven (35.0%) of the 20 mollusc samples, tdh-positive organisms were found and their levels ranged from 3.6x10 to 1.1 x 103 MPN/100 g. From four of seven tdhpositive samples, tdh-positive V. parahaemolyticus was isolated.     

Calculation of photogenerated carrier escape rates from GaAs/AlGa1-xAs quantum wells

We present a new theory for photogenerated carrier escape rates from single quantum wells, as a function of an applied electric field, that includes thermionic emission, direct tunneling, and tunneling via thermal occupation of upper subbands, and compare the results for GaAs/Al_xGa_1-xAs quantum wells with recent experiments. We account for the two dimensional (2D) density of states below the barrier, assume thermal equilibrium of carriers within the well, allow for the possibility of strain in the well and/or barrier, and include the contribution to electron thermionic emission from indirect conduction band minima. Our expressions for thermionic emission reduce, in the limit of large well width, to those derived by assuming a three-dimensional (3D) density of states. The results for electron emission from GaAs/Al_xGa_1-xAs quantum wells with x=0.2 and x=0.4 barriers at room temperature agree well with experiment. For wells with x=0.2 barriers, thermally assisted tunneling overtakes thermionic emission around 40 kV/cm, while for wells with x=0.4 barriers thermionic emission from the L valley conduction band minima dominates for fields less than 70 kV/cm. For holes we show that the escape rates are very sensitive to the in-plane effective masses, and results using simple expressions for the in-plane masses that do not include light/heavy-hole mixing agree poorly with experiment. The agreement with experiment is improved using in-plane masses that include light/heavy-hole mixing, particularly for wells with high barriers. We suggest that agreement with experiment would be improved by using more accurate in-plane hole masses for all of the subbands     

Rubber‐toughened polyamide‐6 with a low thermal expansion coefficient: effect of preferential distribution of rubber and inorganic filler

The effects of morphological changes on the thermal expansion, toughness and heat resistance of polyamide‐6 (PA)/styrene–ethylene–butylene–styrene (SEBS)/polyphenylene ether (PPE) blends were investigated. Compared with the typical ‘sea (PA matrix)–island (PPE domain)–lake (SEBS in PPE domain)’ morphology, an injection‐molded ternary blend with a preferential distribution of SEBS component at the interface between PA and PPE exhibited a low coefficient of linear thermal expansion (CLTE) in the flow direction. This low CLTE was ascribed to the deformation of SEBS and PA into a co‐continuous microlayer network structure during injection molding. Consequently, the expansion preferentially occurred towards the thickness direction. Further CLTE reduction either by a change in PA viscosity or by the selective location of an inorganic filler was examined, and its influences on impact strength and heat resistance are discussed based on transmission electron microscopy observations. © 2015 Society of Chemical Industry     

Estimation of Small Reservoir Storage Capacities with Remote Sensing in the Brazilian Savannah Region

Small reservoirs play an important role in supporting the local economy in the savannah areas of Brazil and are primarily used for the provision of water for irrigation and watering livestock. Hundreds of small reservoirs have been built in the last few decades in the Preto River Basin, but efficient water management and sound planning are hindered by inadequate knowledge of the number, storage capacity and spatial distribution of reservoirs in the basin. The main reason for the lack of this information is that current methodologies for quantifying the physical parameters of reservoirs are laborious, time consuming and costly. To address this lack of data, a simple method to estimate reservoir storage volumes based on remotely sensed reservoir surface area measured with LANDSAT was developed. The method was validated with a subset of reservoirs in the Preto River Basin for which surface areas, shapes and depths were determined with ground-based survey measurements. The agreement between measured and the remotely sensed reservoir volumes was satisfactory, indicating that remotely-sensed images can be used for improved management of water in the Brazilian Savannah region. With the newly developed methods we found that the Preto River Basin’s 147 small reservoirs can store 19 × 10⁶ m³ of water at full capacity.     

Hybrid Counterfactual Logics

The purpose of this paper is to argue that the hybrid formalism fits naturally in the context of David Lewis’s counterfactual logic and that its introduction into this framework is desirable. This hybridization enables us to regard the inference “The pig is Mary; Mary is pregnant; therefore the pig is pregnant” as a process of updating local information (which depends on the given situation) by using global information (independent of the situation). Our hybridization also has the following technical advantages: (i) it preserves the completeness and decidability of Lewis’s logic; (ii) it allows us to characterize the Limit Assumption as a proof-rule with some side-conditions; and (iii) it enables us to establish a general Kripke completeness result by using the proof-rule corresponding to the Limit Assumption.     

Fabrication of optics by use of plasma chemical vaporization machining with a pipe electrode

We figure optical surfaces by plasma chemical vaporization machining (CVM) with a pipe electrode, in which an rf plasma generated at the electrode tip under approximately atmospheric pressure moves over the surfaces. We propose a shaping method in which the movement of plasma on the surfaces can be determined. Flat and aspheric surfaces are successfully figured with the desired peak-to-valley shape accuracy of 0.1 microm. The root-mean-square roughness of the resultant surfaces is at the subnanometer level. These results confirm that the plasma CVM and the shaping method have the capability to fabricate optics with high accuracy.     

The effect of the membrane fluidity on pharmacokinetics for lipid A analog E5531

The effect of the dispersing procedure on the aggregate size, membrane fluidity and the pharmacokinetics were evaluated for the lipid A analog E5531. The size of the aggregates prepared by the pH-jump method (pH 11.0 → 7.3) was decreased, reaching 20 nm with increasing dispersing time in 0.003 N NaOH (pH 11.0). The membrane fluidity of the aggregates increased with increasing dispersing time. When prepared by the normal dilution method (pH 7.3 → 7.3), the size of the aggregates remained constant at 150 nm and the membrane fluidity was smaller compared to samples prepared by the pH-jump method. Using samples with different degrees of hydration and different membrane fluidities prepared by the pH-jump method, the pharmacokinetics after intravenous administration into rats were evaluated, and the data obtained confirmed that the membrane fluidity was correlated with the pharmacokinetics in rat. In addition, E5531 vials were stable for 24 months at room temperature when used within 24 hr after reconstitution.     

Two-dimensional ensemble Monte Carlo calculation of pulse responsesof submicrometer GaAs metal-semiconductor-metal photodetectors

Pulse responses of top-illuminated GaAs metal-semiconductor-metal photodetectors (MSM PDs) are evaluated by using a two-dimensional ensemble Monte Carlo technique. Fundamental assumptions and the model used for the evaluation are detailed. Pulsewidths for MSM PDs are presented as functions of the gap length between metal electrodes and the photon energy of optical pulses. It is also shown that reducing the thickness of the absorption region is very effective for shortening the pulsewidth of MSM PDs     

Bacillus cereus septicemia in a patient with severe aplastic anemia

A 78-year-old female was admitted with complaints of malaise and fatigue in the legs. The patient was diagnosed as severe aplastic anemia and treatment was started with metenolone and steroid pulse therapy. Administration of antibiotics and granulocyte-colony stimulating factor which led to a resolution of the high fever. About four months after admission, the patient developed vomiting and abdominal pain with a spiking fever. The next day after suddenly losing consciousness, she died. B. cereus was isolated from blood cultures. Autopsy specimens of the liver, cardiac muscle and lung showed changes due to B. cereus. This pathogen is widely distributed in nature. We should not overlook B. cereus as a contamination, but rather should consider it a potential pathogen in immunocompromised hosts, when it is isolated from blood cultures.