Additive Manufacturing-Enabled Architected Nanocomposite Lattices Coated with Plasmonic Nanoparticles for Water Pollutants Detection

Novel low-cost materials to uptake and detect vestigial amounts of pesticides are highly desirable for water quality monitoring. Herein, are demonstrated, for the first time, surface-enhanced Raman scattering (SERS) sensors enabled via additively manufactured lattices coated with plasmonic nanoparticles (NPs) for detecting pesticides in real water samples. The architected lattices comprising polypropylene (PP) and multiwall carbon nanotubes (MWCNTs) are realized via fused filament fabrication (FFF). In the first stage, the SERS performance of the PP/MWCNT filaments coated with distinct metallic NPs (Ag NPs and Au NPs) is evaluated using methylene blue (MB) as molecular probe. Thereafter, distinctly architected hybrid SERS sensors with periodic porous and fully dense geometries are investigated as adsorbents to uptake MB from aqueous solutions and subsequent detection using SERS. The spatial distribution of MB and Ag NPs on the FFF-printed lattices is accomplished by SERS imaging. The best hybrid composite is used as SERS probing system to detect low amounts of pesticides (thiram and paraquat) and offers a detection limit of 100 nm for both pesticides. As a proof-of-concept, FFF-enabled test strips are used to detect in loco paraquat molecules spiked on real water samples (Estuary Aveiro water and tap water) using a portable Raman spectrometer.     

Study of the vertical transport in <Emphasis Type="Italic">p</Emphasis>-doped superlattices based on group III-V semiconductors

The electrical conductivity σ has been calculated for p-doped GaAs/Al_0.3Ga_0.7As and cubic GaN/Al_0.3Ga_0.7N thin superlattices (SLs). The calculations are done within a self-consistent approach to the theory by means of a full six-band Luttinger-Kohn Hamiltonian, together with the Poisson equation in a plane wave representation, including exchange correlation effects within the local density approximation. It was also assumed that transport in the SL occurs through extended minibands states for each carrier, and the conductivity is calculated at zero temperature and in low-field ohmic limits by the quasi-chemical Boltzmann kinetic equation. It was shown that the particular minibands structure of the p-doped SLs leads to a plateau-like behavior in the conductivity as a function of the donor concentration and/or the Fermi level energy. In addition, it is shown that the Coulomb and exchange-correlation effects play an important role in these systems, since they determine the bending potential.     

Activation of Pozzolanic Reaction of Hydrated Portland Cement Fly Ash Pastes in Sulfate Solution

The activation of the pozzolanic reaction of fly ash in portland cement paste immersed in sulfate solution has been studied. Mixtures of two Spanish fly ashes (ASTM class F) with 0%, 15%, and 35% replacement of portland cement by fly ash were immersed in Na₂SO₄ solution, of 2880 ppm SO₄²⁻ concentration, for a period of 90 days. The resistance of the different mixtures to the sulfate attack was evaluated using the Koch-Steinegger test. The results showed that all of the mixtures were sulfate resistant, despite the high Al₂O₃ content of the fly ash. The diffusion of SO₄²⁻ and Na⁺ ions through the pore solution activated the pozzolanic reactivity of the fly ashes, causing microstructural changes, which were characterized by X-ray diffraction (XRD), mercury intrusion porosimetry (MIP), and scanning electron microscopy (SEM). As a result, the flexural strength of the mixtures increased, principally for the fly ash of a lower particle size and 35% of addition.     

Physicochemical Study of Glycerol Hydrogenolysis Over a Ni–Cu/Al2O3 Catalyst Using Formic Acid as the Hydrogen Source

Glycerol hydrogenolysis to propanediols requires the use of hydrogen as reactant. One interesting option is to directly generate this hydrogen in active sites of the support using hydrogen donors, such as formic acid. The effect that the reacting pressure has on glycerol conversion and product selectivity over a Ni–Cu/Al₂O₃ catalyst was studied. The negative effect of decreasing the pressure was much more significant when the source of hydrogen was dissolved molecular hydrogen than when it was formic acid. X-ray photoelectron spectroscopy and temperature programmed reduction measurements were performed to understand the effect of Ni–Cu/Al₂O₃ reduction procedure on the catalytic activity. Semi-batch reactor studies with the Ni–Cu/Al₂O₃ catalyst were carried out with continuous addition of the hydrogen donor to obtain kinetic data. Langmuir–Hinshelwood type models were developed to describe the direct conversion of glycerol into propanediol, and propanediol further hydrogenolysis to 1-propanol. The model included the competitive adsorption between both glycols. These models were used to obtain valuable data for the optimization of the process.     

Comparison of the bligh and dyer and folch methods for total lipid determination in a broad range of marine tissue

For many studies, it is important to measure the total lipid content of biological samples accurately. The Bligh and Dyer method of extraction was developed as a rapid but effective method for determining total lipid content in fish muscle. However, it is also widely used in studies measuring total lipid content of whole fish and other tissues. Although some investigators may have used modified Bligh and Dyer procedures, rarely have modifications been specified nor has their effectiveness been quantitatively evaluated. Thus, we compared this method with that of the classic Folch extraction in determining total lipid content of fish samples ranging from 0.5 to 26.6% lipid. We performed both methods as originally specified, i.e., using the chloroform/methanol/water ratios of 1:2:0.8 and 2:2:1.8 (before and after dilution, respectively) for Bligh and Dyer and of 8:4:3 for Folch, and with the initial solvent/sample ratios of (3+1):1 (Bligh and Dyer) and 20:1 (Folch). We also compared these with several other solvent/sample ratios. In samples containing <2% lipid, the results of the two methods did not differ. However, for samples containing >2% lipid, the Bligh and Dyer method produced significantly lower estimates of lipid content, and this underestimation increased significantly with increasing lipid content of the sample. In the highest lipid samples, lipid content was underestimated by up to 50% using the Bligh and Dyer method. However, we found a highly significant linear relationship between the two methods, which will permit the correction of reported lipid levels in samples previously analyzed using an unmodified Bligh and Dyer extraction. In the future, modifications to procedures and solvent/sample ratios should be described.     

X-ray Tomography Study on Green State Joining of Silicon Carbide Using Polymer Precursors

X-ray tomography has been used to investigate the density variations in SiC joints formed using polymer pastes. It has been demonstrated that X-ray tomography provides accurate bulk density measurements and volumetric density gradients. The results suggest that the magnitude of the applied pressure after green state joining and the amount of polymer (polycarbosilane, PCS) in the joining pastes influence the green density of the joints. All joints are prepared and applied in air atmosphere and at room temperature. The green densities of the joints increase from 54% to 66% of theoretical with the increase of the applied pressure from ambient to 138 MPa. Highest joint density without applied pressure is achieved using paste containing 50 vol% PCS. Furthermore, allylhydridopopolycarbosilane- (AHPCS-) containing pastes resulted in higher densities at the joint–matrix interface, indicating infiltration of polymer into the matrix.     

Poly(lactic acid)/pulp fiber composites: The effect of fiber surface modification and hydrothermal aging on viscoelastic and strength properties

Poly(lactic acid) (PLA)/kraft pulp fiber (30 wt%) composites were prepared with and without a coupling agent (epoxidized linseed oil, ELO, 1.5 wt%) by injection molding. The non-annealed composite samples, along with lean PLA, were exposed to two hydro-thermal conditions: cyclic 50% RH/90% RH at 23 and 50°C, both up to 42 days. The aging effects were observed by size exclusion chromatography, differential scanning calorimetry, dynamic and tensile mechanical analysis, and fracture surface imaging. ELO temporarily accelerated the material's internal transition from viscous to an increasingly elastic response during the aging at 50°C. ELO also slowed down the tensile strength reduction of the composites at 50°C. These observations were explained with the hydrophobic ELO molecules' coupling and plasticizing effects at fiber/matrix interfaces. No effects were observed at 23°C.