Optimal pixel aspect ratio for enhanced 3D TV visualization

In multiview 3D TV, a pair of corresponding pixels in adjacent 2D views contributes to the reconstruction of voxels (3D pixels) in the 3D scene. We analyze this reconstruction process and determine the optimal pixel aspect ratio based on which the estimated object position can be improved given specific imaging or viewing configurations and constraints. By applying mathematical modeling, we deduce the optimal solutions for two general stereo configurations: parallel and with vergence. We theoretically show that for a given total resolution a finer horizontal resolution, compared to the usual uniform pixel distribution, in general, provides a better 3D visual experience for both configurations. The optimal value may vary depending on different configuration parameter values. We validate our theoretical results by conducting subjective studies using a set of simulated non-square discretized red–blue stereo pairs and show that human observers indeed have a better 3D viewing experience with an optimized vs. a non-optimized representation of 3D-models.     

Improved harmonic suppression efficiency of single-phase APFs in distorted distribution systems

In this study, a control method is proposed to improve the harmonic suppression efficiency of the single-phase active power filter in a distorted power system to suppress current harmonics and reactive power. The proposed method uses the self-tuning filter (STF) algorithm to process single-phase grid voltage in order to provide a uniform reference grid current, which increases the efficiency of the system. The results of the simulation study are presented to verify the effectiveness of the proposed control technique in this study.     

A Linear Optimal Transportation Framework for Quantifying and Visualizing Variations in Sets of Images

Transportation-based metrics for comparing images have long been applied to analyze images, especially where one can interpret the pixel intensities (or derived quantities) as a distribution of ‘mass’ that can be transported without strict geometric constraints. Here we describe a new transportation-based framework for analyzing sets of images. More specifically, we describe a new transportation-related distance between pairs of images, which we denote as linear optimal transportation (LOT). The LOT can be used directly on pixel intensities, and is based on a linearized version of the Kantorovich-Wasserstein metric (an optimal transportation distance, as is the earth mover’s distance). The new framework is especially well suited for computing all pairwise distances for a large database of images efficiently, and thus it can be used for pattern recognition in sets of images. In addition, the new LOT framework also allows for an isometric linear embedding, greatly facilitating the ability to visualize discriminant information in different classes of images. We demonstrate the application of the framework to several tasks such as discriminating nuclear chromatin patterns in cancer cells, decoding differences in facial expressions, galaxy morphologies, as well as sub cellular protein distributions.     

Gecko‐Inspired Dry Adhesive for Robotic Applications

Most geckos can rapidly attach and detach from almost any kind of surface. This ability is attributed to the hierarchical structure of their feet (involving toe pads, setal arrays, and spatulae), and how they are moved (articulated) to generate strong adhesion and friction forces on gripping that rapidly relax on releasing. Inspired by the gecko's bioadhesive system, various structured surfaces have been fabricated suitable for robotic applications. In this study, x–y–z asymmetric, micrometer‐sized rectangular flaps composed of polydimethylsiloxane (PDMS) were fabricated using massively parallel micro‐electromechanical systems (MEMS) techniques with the intention of creating directionally responsive, high‐to‐low frictional‐adhesion toe pads exhibiting properties similar to those found in geckos. Using a surface forces apparatus (SFA), the friction and adhesion forces of both vertical (symmetric) and angled/tilted (x–y–z asymmetric) microflaps under various loading, unloading and shearing conditIons were investigated. It was found that the anisotropic structure of tilted microflaps gives very different adhesion and tribological forces when articulated along different x–y–z directions: high friction and adhesion forces when articulated in the y–z plane along the tilt (+y) direction, which is also the direction of motion, and weak friction and adhesion forces when articulated against the tilt (–y) direction. These results demonstrate that asymmetric angled structures, as occur in geckos, are required to enable the gecko to optimize the requirements of high friction and adhesion on gripping, and low frictional‐adhesion on releasing. These properties are intimately coupled to a (also optimum) articulation mechanism. We discuss how both of these features can be simultaneously optimized in the design of robotic systems that can mimic the gecko adhesive system.     

Controlling Plastic Flow across Grain Boundaries in a Continuum Model

A framework for modeling controlled plastic flow through grain boundaries using a continuum plasticity theory, phenomenological mesoscopic field dislocation mechanics (PMFDM), is presented in this article. The developed tool is used to analyze the effect of different classes of constraints to plastic flow through grain boundaries, as it relates to dislocation microstructure development and mechanical response of a bicrystal. It is found that in the case of low misorientation angle between adjacent grains, impenetrable grain boundaries cause significant work hardening as compared to penetrable grain boundaries due to the accumulation of excess dislocations along them. However, a penetrable grain boundary with a high misorientation angle effectively behaves as an impenetrable boundary, with respect to the stress-strain response.     

Angular absorptance and thermal degradation analysis of TiB2/Ti(B,N)/SiON/SiO2 multilayer solar absorber coating

Multilayer solar selective absorber coatings have been developed in the last few decades. The thermal stability in terms of microstructure gives an insightful understanding of the optical properties of such coatings. In this context, we extensively utilized transmission electron microscopy (TEM) analysis to establish the thermal stability of TiB₂/Ti(B,N)/SiON/SiO₂ coating, under thermal cycling/continuous heating to 500°C in vacuum for 250 h. In particular, this work reports the variation in the solar absorptance of TiB₂/Ti(B,N)/SiON/SiO₂ coating with different angles of incidence of the solar radiation. Extensive analysis using the TEM technique reveals the presence of oxide interlayers that act as diffusion barrier layers to enhance the thermal stability of the coating. Computational simulation using SCOUT software validates the measured reflectance spectrum of the developed multilayer coating. The minor changes in absorptance and emissivity after heat treatment in vacuum at 500°C, together with high solar absorptance over a broad angular variation, establish the potential application of TiB₂/Ti(B,N)/SiON/SiO₂ as a selective coating in concentrated solar power systems.     

Studies on the effect of thiuram disulfide on NR vulcanization accelerated by thiazole-based accelerator systems

Thiuram disulfides form synergistic combinations with thiazole and thiazole-based accelerators, namely, N-cyclohexy-2-benzothiazole sulfenamide (CBS), 2-mercaptobenzothiazole(MBT), and 2-mercaptobenzothiazyl disulfide (MBTS). Unfortunately, widely used thiuram disulfides (TD) generate carcinogenic N-nitrosoamine. It is reported that the nitrosamines from N-methylpiperazine and dibenzylamine are free from this menace. So, some investigations were carried out with the binary combinations of each of bis(N-methylpiperazino)thiuram disulfide (MPTD), tetrabenzylthiuram disulnde (TBzTD), and tetramethyl-thiuram disulfide (TMTD) separately with CBS, MBT, and MBTS. It was observed that all the TD are activated by the CBS, MBT, or MBTS in the combinations studied. The intensity of activation is manifested in the enhancement of torque, modulus, tensile strength, cure rate, hardness, and decrease of elongation at break values and is very much dependent upon the ratio of the accelerators used. Considering the torque, modulus, tensile strength, and the elongation at break values, it apears that MPTD and TBzTD are capable of competing with the hitherto unbeaten TMTD as suitable accelerators for the vulcanization of rubber. Some investigations in respect to heat- and age-resistance behavior have also been carried out and the observed differences in the activities of various binary combinations have been explained through a mechanism. The results obtained with filled vulcanizates indicate that the binary systems comprising TD and MBTS provide fruitful results of which the TBzTD–MBTS combination seems to give the best cure and physical data for practical vulcanizates. © 1996 John Wiley & Sons, Inc.     

Cure synergism in XNBR vulcanization in presence of thiophosphoryl disulfides and amine disulfide/thiazole accelerators

The study deals with the vulcanization of carboxylated nitrile butadiene rubber (XNBR) having synergistic combinations of accelerators comprising thiophosphoryl disulfide as one of the components. Other constituent accelerators employed in the present investigation are 2-mercaptobenzothiazole (MBT), 2-mercaptobenzothiazyl disulfide (MBTS), bis(N-oxydiethylene)disulfide (ODDS), N-oxydiethylene 2-benzothiazole sulfenamide (OBTS), etc. The binary combinations of thiophosphoryl disulfides with OBTS exhibited the highest mutual activity in the respective areas, so far as the physical properties are concerned. Structural characterization of different thiophosphoryl disulfide-accelerated XNBR vulcanizates, including those formed from the synergistic combinations with OBTS, were studied using a methyl iodide probe. It was found that the amount of sulfidic crosslinks arising from the reaction between  COOH groups of XNBR and thiophosphoryl disulfides, actually controls the network structure as wellas the physical properties of the vulcanizates. © 1996 John Wiley & Sons, Inc.