Low-power high-speed interconnection networks in NOC using multi-valued current-mode techniques

With the fast developments and growth of electronic applications and a great demand for increasing the speed of processors, VLSI circuits and on-chip interconnections the ＂Networks-On-Chip＂ （NOC） is the best solution for ＂System-On-Chip＂ （SOC）. The most fundamental part of networks On-Chip is the On-Chip interconnection. The model presented in this article describes the method of sending data on On-Chip interconnection by using a current-mode multi-valued logic instead of voltage-mode in order to increase speed and reduce the number of interconnection wires.     

Comparative effects of gamma and microwave irradiation on the quality of black pepper

Powdered black pepper from Egyptian markets, was irradiated with different recommended doses of gamma rays (5.0 and 10.0 kGy) and with microwaves for different periods (20, 40 and 75 s) to improve its hygienic quality. The most common bacterial isolates were of three generaBacillus, Clostridium andMicrococcus (7.5 × 10⁶), whereas the predominant fungi (7.8 × 10⁴) wereAspergillus species,A. glaucus, A. flavus, A. niger andA. ochraceus. Doses of gamma irradiation used (5.0 and 10 kGy) were sufficient to decrease spore-forming bacteria (SFB) and to inhibit the fungal flora and coliforms which contaminated the black pepper powder. Microwave treatments for 40 s and 75 s were of the same effectiveness whereas treatment for 20 s was less so. GLC analysis proved the presence of 31 peaks, only 19 compounds were identified as monoterpene hydrocarbons (56.21%), the major one being -phellandrene and limonene. Sesquiterpenes were also present, mainly -caryollphyllene (3.69%) as well as oxygenated compounds such as terpenol, geraniol, Me-chavicol, eugenol and anisol. Gamma irradiation at 5 kGy and 10 kGy respectively decreased the numbers of identified compounds from 21 (86.58% concentration) in untreated pepper to 16 (59.22% concentration), 15 (54.06% concentration). In comparison, microwave treatments, particularly for 40 s and 75 s, increased the concentration of the same compounds. The results obtained indicate that microwave treatment, under these conditions, is a safe and suitable technique for decontamination of black pepper which does not result in a great loss of flavour compounds, as compared with recommended doses of gamma irradiation.     

High-performance MEMS shutter display with metal-oxide thin-film transistors and optimized MEMS element

Active matrix prestressed microelectromechanical shutter displays enable outstanding optical properties as well as robust operating performance. The microelectromechanical systems (MEMS) shutter elements have been optimized for higher light outcoupling efficiency with lower operation voltage and higher pixel density. The MEMS elements have been co-fabricated with self-aligned metal-oxide thin-film transistors (TFTs). Several optimizations were required to integrate MEMS process without hampering the performance of both elements. The optimized display process requires only seven photolithographic masks with ensuring proper compatibility between MEMS shutter and metal-oxide TFT process.     

Green synthesised zinc oxide nanostructures through Periploca aphylla extract shows tremendous antibacterial potential against multidrug resistant pathogens

To grapple with multidrug resistant bacterial infections, implementations of antibacterial nanomedicines have gained prime attention of the researchers across the globe. Nowadays, zinc oxide (ZnO) at nano‐scale has emerged as a promising antibacterial therapeutic agent. Keeping this in view, ZnO nanostructures (ZnO‐NS) have been synthesised through reduction by P. aphylla aqueous extract without the utilisation of any acid or base. Structural examinations via scanning electron microscopy (SEM) and X‐ray diffraction have revealed pure phase morphology with highly homogenised average particle size of 18 nm. SEM findings were further supplemented by transmission electron microscopy examinations. The characteristic Zn–O peak has been observed around 363 nm using ultra‐violet–visible spectroscopy. Fourier‐transform infrared spectroscopy examination has also confirmed the formation of ZnO‐NS through detection of Zn–O bond vibration frequencies. To check the superior antibacterial activity of ZnO‐NS, the authors'' team has performed disc diffusion assay and colony forming unit testing against multidrug resistant E. coli, S. marcescens and E. cloacae. Furthermore, protein kinase inhibition assay and cytotoxicity examinations have revealed that green fabricated ZnO‐NS are non‐hazardous, economical, environmental friendly and possess tremendous potential to treat lethal infections caused by multidrug resistant pathogens.Inspec keywords: nanomedicine, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, scanning electron microscopy, X‐ray diffraction, antibacterial activity, transmission electron microscopy, particle size, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, enzymes, biochemistry, molecular biophysics, microorganisms, drugs, toxicology, bonds (chemical), semiconductor growth, nanofabrication, vibrational modesOther keywords: green synthesised zinc oxide nanostructures, Periploca aphylla extract, antibacterial potential, multidrug resistant pathogens, multidrug resistant bacterial infections, antibacterial nanomedicines, P. aphylla aqueous extract, structural examinations, scanning electron microscopy, X‐ray diffraction, pure phase morphology, homogenised average particle size, SEM, transmission electron microscopy, Fourier‐transform infrared spectroscopy, bond vibration frequency, antibacterial activity, disc diffusion assay, colony forming unit testing, S. marcescens, E. cloacae, E. coli, ultraviolet‐visible spectroscopy, protein kinase inhibition assay, cytotoxicity, lethal infections, ZnO     

Novel method to transform ZnO nanorods into interlaced tattered nanosheets by changing the target inclination angle

ZnO nanoparticles were synthesized by liquid-phase pulse laser ablation of a Zn foil target immersed in deionized water. Nanosecond Q-switched Nd:YAG laser pulses of 532 nm were applied to the Zn foil target at a perpendicular and inclined (θ = 45°) angles. X-ray diffraction analysis revealed that both cases feature a ZnO nanostructure with a hexagonal wurtzite structure and that the particle size increases with the inclined target angle. Field emission scanning electron microscopy results of a colloidal drop cast on a glass substrate showed the ZnO has a nanorod structure in the case of a perpendicular target angle and an interlaced tattered nanosheet structure in the case of an inclined target angle. Photoluminescence spectra showed emission peaks in the UV, violet, blue, and green spectral regions, which correspond to excitonic and various defects resulting in an enhancement of emissions at inclined target angle.     

A Layered-Encoding Cascade Optimization Approach to Product-Mix Planning in High-Mix–Low-Volume Manufacturing

High-mix-low-volume (HMLV) production is currently a worldwide manufacturing trend. It requires a high degree of customization in the manufacturing process to produce a wide range of products in low quantity in order to meet customers' demand for more variety and choices of products. Such a kind of business environment has increased the conversion time and decreased the production efficiency due to frequent production changeover. In this paper, a layered-encoding cascade optimization (LECO) approach is proposed to develop an HMLV product-mix optimizer that exhibits the benefits of low conversion time, high productivity, and high equipment efficiency. Specifically, the genetic algorithm (GA) and particle swarm optimization (PSO) techniques are employed as optimizers for different decision layers in different LECO models. Each GA and PSO optimizer is studied and compared. A number of hypothetical and real data sets from a manufacturing plant are used to evaluate the performance of the proposed GA and PSO optimizers. The results indicate that, with a proper selection of the GA and PSO optimizers, the LECO approach is able to generate high-quality product-mix plans to meet the production demands in HMLV manufacturing environments.     

Multiresolution HVS and statistically based image coding scheme

In this paper a novel multiresolution human visual system and statistically based image coding scheme is presented. It decorrelates the input image into a number of subbands using a lifting based wavelet transform. The codec employs a novel statistical encoding algorithm to code the coefficients in the detail subbands. Perceptual weights are applied to regulate the threshold value of each detail subband that is required in the statistical encoding process. The baseband coefficients are losslessly coded. An extension of the codec to the progressive transmission of images is also developed. To evaluate the performance of the coding scheme, it was applied to a number of test images and its performance with and without perceptual weights is evaluated. The results indicate significant improvement in both subjective and objective quality of the reconstructed images when perceptual weights are employed. The performance of the proposed technique was also compared to JPEG and JPEG2000. The results show that the proposed coding scheme outperforms both coding standards at low compression ratios, while offering satisfactory performance at higher compression ratios.     

Development of active matrix LCD for use in high‐resolution adaptive headlights

Conventional adaptive driving beam headlamps are limited in achieving still higher quantities of switchable pixels by the number of LEDs and movable elements needed. In this paper, it is shown that by integrating an active matrix liquid crystal display module, it is possible to realize fully adaptive high‐resolution headlights without mechanical elements and a finite number of LED with 30 k switchable pixels.     

Determining the Impact of Personal Mobility Carbon Allowance Schemes in Transportation Networks

Personal mobility carbon allowance (PMCA) schemes are designed to reduce carbon consumption from transportation networks. PMCA schemes influence the travel decision process of users and accordingly impact the system metrics including travel time and greenhouse gas (GHG) emissions. We develop a multi-user class dynamic user equilibrium model to evaluate the transportation system performance when PMCA scheme is implemented. The results using Sioux-Falls test network indicate that PMCA schemes can achieve the emissions reduction goals for transportation networks. Further, users characterized by high value of travel time are found to be less sensitive to carbon budget in the context of work trips. Results also show that PMCA scheme can lead to higher emissions for a path compared with the case without PMCA because of flow redistribution. The developed network equilibrium model allows to examine the change in system states at different carbon allocation levels and to design parameters of PMCA schemes accounting for population heterogeneity.