Load-balanced parallel streamline generation on large scale vector fields

Because of the ever increasing size of output data from scientific simulations, supercomputers are increasingly relied upon to generate visualizations. One use of supercomputers is to generate field lines from large scale flow fields. When generating field lines in parallel, the vector field is generally decomposed into blocks, which are then assigned to processors. Since various regions of the vector field can have different flow complexity, processors will require varying amounts of computation time to trace their particles, causing load imbalance, and thus limiting the performance speedup. To achieve load-balanced streamline generation, we propose a workload-aware partitioning algorithm to decompose the vector field into partitions with near equal workloads. Since actual workloads are unknown beforehand, we propose a workload estimation algorithm to predict the workload in the local vector field. A graph-based representation of the vector field is employed to generate these estimates. Once the workloads have been estimated, our partitioning algorithm is hierarchically applied to distribute the workload to all partitions. We examine the performance of our workload estimation and workload-aware partitioning algorithm in several timings studies, which demonstrates that by employing these methods, better scalability can be achieved with little overhead.     

Effect of axial and radial velocities on solids mass flow rate measurement

In coal powder flow transportation and combustion, powder mass flow rate is a key parameter to be monitored and controlled. Electrostatics is one of the techniques used for such task with its non-intrusive, robust, and low cost natures. The passive electrostatic meters measure charge induced on the detecting electrodes. As it is known that the induced signal is not only dependent on the solids mass flow rate, but also affected by solids velocity. However, the velocity of particles usually referred to is the axial velocity. In reality, the solids velocity is a vector, its projections in both the radial and tangential directions also need to be investigated. This paper analyses the dynamic sensitivity of ring-shaped electrostatic sensors using the finite element method (FEM), and investigates the influence of the axial and radial velocities on the induced signal on the electrodes.     

Optimal Error Estimates of the Legendre Tau Method for Second-Order Differential Equations

In this paper, we prove that the Legendre tau method has the optimal rate of convergence in L ²-norm, H ¹-norm and H ²-norm for one-dimensional second-order steady differential equations with three kinds of boundary conditions and in C([0,T];L ²(I))-norm for the corresponding evolution equation with the Dirichlet boundary condition. For the generalized Burgers equation, we develop a Legendre tau-Chebyshev collocation method, which can also be optimally convergent in C([0,T];L ²(I))-norm. Finally, we give some numerical examples.     

Stabilization of linear systems with input delay and saturation—A parametric Lyapunov equation approach

This paper studies the problem of stabilizing a linear system with delayed and saturating feedback. It is known that the eigenstructure assignment‐based low‐gain feedback law (globally) stabilizes a linear system in the presence of arbitrarily large delay in its input, and semi‐globally stabilizes it when the input is also subject to saturation, as long as all its open‐loop poles are located in the closed left‐half plane. Based on a recently developed parametric Lyapunov equation‐based low‐gain feedback design method, this paper presents alternative, but simpler and more elegant, feedback laws that solve these problems. The advantages of this new approach include its simplicity, the capability of giving explicit conditions to guarantee the stability of the closed‐loop system, and the ease in scheduling the low‐gain parameter on line to achieve global stabilization in the presence of actuator saturation. Copyright © 2009 John Wiley & Sons, Ltd.     

Assessment of working conditions in two different semiconductor manufacturing lines: Effective ergonomics interventions

This article examines two manufacturing lines producing semiconductors using different technology concepts, namely Conventional Line (CL) and Lean Production Line (LPL). Both lines manufacturing the same products were compared using various factors, including working conditions, task risks and dangers of the job, and physical body stress. Ergonomic approaches were adopted in the investigation of the two lines. Survey questionnaires were administered to 30% of the workers, and multiple statistical tests were used to determine crucial predictors and to investigate the interactions between the factors. This research has shown that improved ergonomics factors will lead to better working conditions and thus increased job satisfaction. The observed ergonomic differences of these two production lines are compared, and appropriate managerial remedial action is recommended. The interventions to both the lines should reduce accident rates, minimize waste of resources, improve work effectiveness, and provide a better working environment that enhances employees' morale and maximizes productivity and profits. © 2010 Wiley Periodicals, Inc.     

Partner selection in a virtual enterprise under uncertain information about candidates

Partner selection is a major issue in the formation of a virtual enterprise. In practice, in the partner selection process, the information about the candidates and their performances are incomplete and uncertain. Vague sets theory is one of the methods used to deal with uncertain information. In this paper, a new method based on vague sets is proposed to deal with the partner selection problem in the formation of a virtual enterprise while the factors of satisfaction degree, due date, cost and the precedence of tasks are taken into account. On the basis of the agreement index of satisfaction degree, the formulated partner selection problems are interpreted so as to maximize the minimum agreement index. To solve the problem, an improved particle swarm optimization (PSO) algorithm is proposed. Finally, the simulation of a numerical example demonstrates that the method is effective.     

A belief-rule-based inventory control method under nonstationary and uncertain demand

This paper is devoted to investigating inventory control problems under nonstationary and uncertain demand. A belief-rule-based inventory control (BRB-IC) method is developed, which can be applied in situations where demand and demand-forecast-error (DFE) do not follow certain stochastic distribution and forecasting demand is given in single-point or interval styles. The method can assist decision-making through a belief-rule structure that can be constructed, initialized and adjusted using both manager’s knowledge and operational data. An extended optimal base stock (EOBS) policy is proved for initializing the belief-rule-base (BRB), and a BRB-IC inference approach with interval inputs is proposed. A numerical example and a case study are examined to demonstrate potential applications of the BRB-IC method. These studies show that the belief-rule-based expert system is flexible and valid for inventory control. The case study also shows that the BRB-IC method can compensate DFE by training BRB using historical demand data for generating reliable ordering policy.     

动态相位调整技术在FPGA中的设计与实现

提出一种基于FPGA的动态相位调整实现方案。在高速数据传输接口中,由于数据窗缩小以及传输路径不一致,造成数据和时钟信号在FPGA的接收端发生位偏移和字偏移。动态相位调整技术根据当前各数据线物理状态,对各信号线动态进行去偏移操作,克服了静态相位调整中参数不可再调的缺点,使接口不断适应外部环境的变化,从而保证数据的可靠传输。     

A system-level model for a silicon thermal flow sensor

A system-level model with lumped parameters for a thermal flow sensor is presented. The model is built with 13 circuit cells consisting of thermal resistors and thermal capacitors in SPICE. The circuit cell originates from the heat conduction equation using the Finite Differential Method, including the 2-D thermal conduction cell, the convection cell, and the thermal capacity in the chip. Based on the thermal model of the flow sensor, the 2-D temperature distribution of the chip can be calculated with SPICE in both the constant power mode (CP) and constant temperature difference mode (CTD). As an example, the system level model of the thermal anemometer in the CTD mode was established in PSPICE. Wind tunnel test was carried out to verify the system model, and show a reasonable agreement with the simulation results, with an error less than 8%.     

Explicit synchronisation of heterogeneous dynamics networks via three-layer communication framework

This paper addresses the explicit synchronisation of heterogeneous dynamics networks via three-layer communication framework. The main contribution is to propose an explicit synchronisation algorithm, in which the synchronisation errors of all the agents are decoupled. By constructing a three-layer node model, the proposed algorithm removes the assumptions that the topology is fixed and the synchronisation process is coupled. By introducing appropriate assumptions, the algorithm leads to a class of explicit synchronisation protocols based on the states of agents in different layers. It is proved in the sense of Lyapunov that, if the dwell time is larger than a threshold, the explicit synchronisation can be achieved for closed-loop heterogeneous dynamics networks under switching topologies. The results are further extended to the cases in which the switching topologies are only frequently but not always connected. Simulation results are presented with four single-link manipulators to verify the theoretical analysis.