对我国工程项目管理的探讨

随着我国加入WT0,我国与世界其他国家的合作与交流将更加紧密,工程项目(尤其是国际工程项目)建设的合作和竞争也将越来越亲密和激烈.本文通过对国外工程项目实施的特点与方式,国外工程项目的管理与控制,来分析我国在工程项目管理中存在的不足,并由此对我国的工程项目的发展提出几点建议.     

某型内燃机闭环控制减振的仿真研究

内燃机自身的振动是重型军用车辆主要的振动和噪声源,对其进行有效的振动控制十分重要.但由于内燃机系统结构的复杂性,研究其振动和噪声控制比较困难.针对某型内燃机系统,采用Matlab软件的Simulink工具,建立了整个系统的动力学仿真模型,并分别对该模型进行简谐、白噪声信号扰动下的减振控制研究,控制方法采用闭环数字PI策略.系统输出转矩和转速的曲线结果表明减振具有明显的效果.     

AS-Interface现场总线及其在低压配电与电控系统中的应用

介绍面向工控网络最底层的AS-Interface现场总线的系统构成、物理介质、电源数据传输方式及其性能和特点.AS-Interface现场总线适用于由一个控制器连接多个二进制传感器和执行器的典型要求.应用AS-Interface现场总线能组成一个在空间上独立的由网络实现两部分逻辑运作的低压配电与电控系统.     

ISA法铜电解槽槽面水平误差的控制

本文介绍了通过采用找平装置来控制ISA法铜电解槽槽面水平误差的方法,通过现场测量及工艺操作证明是行之有效的。     

Lanthanum Distribution and Oxygen Vacancy Concentration in SrBi4-x Lax Ti4O15

The Raman and X-ray photoemission spectroscopy of lanthanum-doped SrBi4Ti4O15 (SBLT -x, x =0.00, 0. 05, 0. 10, 0. 25, 0.50, 0. 75 and 1.00) ferroelectric ceramics were investigated to explore the La substitution site and the influence of La-doping on the oxygen vacancy concentration. The results suggest that La3 ions behave pronounced site selectivity for the A site in the case of x ≤ 0.10, and they are incorporated into Bi2O2 layers at higher content. The oxygen vacancy concentration declines with La-doping, and the decrease seems saturated as La content is higher than 0.10.     

Program Adaptation via Output-Constraint Specialization

In component-based software development, gluing of two software components is usually achieved by defining an interface specification, and creating wrappers on components to support the interface. We believe that interface specification provides useful information for specializing components. An interface may define constraints on a component's inputs, as well as on its outputs. In this paper, we propose a new approach to program specialization with respect to output constraints. We provide the form in which an efficient specialized program should be after such specialization, and consider a variant of partial evaluation to achieve it. In the process, we translate an output constraint into a characterization function for a component's input, and define a specializer that uses this characterization to guide the specialization process. We believe this work will broaden the scope of program specialization, and provide a framework for building more generic and versatile program adaptation techniques.     

An optimal feedrate model and solution algorithm for a high-speed machine of small line blocks with look-ahead

In complex high-speed machining of consecutive small line blocks, the tool path segments can be so short that a machining center moving at a high feedrate cannot accelerate or decelerate fast enough to make direction changes accurately. Aiming at adjusting the feedrate automatically to achieve maximum productivity, this paper present a novel mathematical model considering the key and representative factors, and then based on it, propose an algorithm to seek the approximate optimal feedrate by evaluating the toolpath ahead. Simulation results demonstrate the machine using the proposed model and algorithm can go fast where possible and to slow down just enough where needed and the productivity can be improved dramatically.     

Fluxing Agents on Ceramification of Composites of MgO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>/Boron Phenolic Resin

Fluxing agents of zinc borate, antimony oxide, galss frit A and glass frit B, with different melting or softening point temperatures, were added into MgO-Al₂O₃-SiO₂/boron phenol formaldehyde resin (MAS/BPF) composites to lower the formation temperature of eutectic liquid phase and promote the ceramification of ceramifiable composites. The effects of fluxing agents on the thermogravimetric properties, phase evolution, and microstructure evolution of MAS / BPF composites were characterized by TG-DSC, XRD and SEM analyses. The results reveal that the addition of a fluxing agent highly reduces the decomposition rate of MAS / BPF composites. Fluxing agents lower the formation temperatures of liquid phases of ceramifiable MAS / BPF composites obviously, and then promote the ceramification and densification process. The final residues of composites are ceramic surrounded by large amount of glass phases.     

不同用量底肥对果蔗产量和品质的影响研究初报

试验结果表明:300 kg/hm2的底肥对果蔗出苗、株高、茎径、单株重、有效茎、多数商品性状和工艺性状具有正效应,对分蘖、蔗汁抽出率和抗螟性有轻微负效应,故其比不施底肥的增产24.52%,达极显著水平,是本试验中对果蔗效果最佳的底肥用量;600 kg/hm2的底肥对果蔗株高、茎径、单株重、部份商品性状、工艺性状和抗螟性有正效应,对出苗无影响,对分蘖、有效茎、多数商品性状有轻微负效应,故其比对照增产20.87%,达极显著水平,是本试验中对果蔗综合性状效果最好的底肥用量;900 kg/hm2的底肥对果蔗分蘖、株高、茎径、单株重、有效茎、少数商品性状、工艺性状和抗螟性具有正效应,对出苗、多数商品性状有负效应,故其增产显著,是本试验中对果蔗效果较好的底肥用量;1200 kg/hm2的底肥对果蔗分蘖、株高、茎径、单株重、田问锤度有轻微正效应,对其他性状则为负效应,是本试验中效果最差、唯一减产的底肥用量.     

4A和13X分子筛去除水中重金属Cd2＋及其吸附性能研究

以4A和13X分子筛为吸附材料,考察废水pH值和Cd2＋初始浓度等对Cd2＋去除率的影响,并研究了分子筛对Cd2＋的吸附性能。结果表明,4A和13X分子筛投加量为0．16 g/L、废水pH值为5、Cd2＋浓度为20 mg/L时,Cd2＋去除率达到95％以上;分子筛对Cd2＋的去除机理以离子交换吸附为主,交换出来的Na＋与分子筛吸附的Cd2＋摩尔浓度比为2;在吸附热力学和动力学方面,4A和13X分子筛均符合Langmuir吸附等温模型和Lagergren二级速率方程,计算的饱和吸附容量 Q0分别为150．15、163．67 mg/g ,二级反应速率常数K2分别为2．45＆#215;10-3、3．96＆#215;10-4 g/（mg ＆#183; s）。该吸附反应是一种单分子层反应速度较快的化学吸附过程。