连续移动床炼焦新工艺

本文论述了目前国内外连续移动床炼焦新技术的工艺原理，介绍了国外连续移动床炼焦新技术的工艺流程及特性，并对连续移动床炼焦新技术的经济技术指标和焦炭特性进行了评述。     

PMN-PZT压电陶瓷的凝胶注模研究

对三元系PMN—PZT压电陶瓷的凝胶注模成形工艺进行了研究,重点讨论了分散剂加入量、pH值、球磨时间与注模浆料流变之间的关系,当分散剂用量为0 .95 %～1 .0 5 % ,pH值为10 .5～11 .5 ,球磨时间为8h时,可以制备出固相含量为5 5 % ,粘度小于1Pa·s的PMN -PZT压电陶瓷悬浮体。将凝胶注模与传统模压成形工艺制备的样品进行了比较,通过扫描电镜(SEM )显微形貌分析和电学性能测定。结果表明:凝胶注模工艺制备的样品与模压工艺制备的样品相比较,其显微结构均匀致密、晶粒大小与晶界分布均匀,气孔率更小,电学性能更均匀。     

由粗氧化锌制备纳米活性氧化锌的研究

采用碳酸氢铵法由粗氧化锌制备纳米活性氧化锌。研究了用碳酸氢铵法由粗氧化锌制备活性氧化锌的热力学、中间体碱式碳酸锌的主要组成和碱式碳酸锌热分解的温度对形貌的影响;考察了中间体碱式碳酸锌的热分解温度和时间对纳米活性氧化锌的纯度、白度、比表面积和表观密度的影响。碱式碳酸锌焙解生成纳米活性氧化锌适宜的温度和时间分别为600℃和1h时,产品中氧化锌的质量分数为97.6%,粒度<100nm,比表面积50m2/g,表观密度0.21g/cm3。     

不锈钢转化器在中小型硫酸装置上的应用前景

分析了传统碳钢转化器存在的缺点。相对于碳钢转化器，不锈钢转化器具有结构简单、安装方便、耐高温、不易漏气、维护工作量小等优点。通过碳钢转化器和不锈钢转化器结构和造价的比较，表明不锈钢转化器在中小型硫酸装置中也有良好的应用前景。     

硬盘用基板微晶玻璃的研究与应用

介绍了适用于高容量、小型化硬盘用基板的各种微晶玻璃材料，简要讨论了各种微晶玻璃的化学组成、显微结构、主晶相种类以及各种微晶玻璃的特性，并对今后的发展趋势进行了展望。     

Pattern synthesis of time‐modulated conformal arrays by an improved differential evolution algorithm

In this article, an improved differential evolution algorithm (IDE) based on two different colonies is proposed and applied to time‐modulated conformal arrays syntheses. The whole population of IDE is divided into two parts. The one part searches the solution globally while the other searches the neighborhood of the solution provided by the previous one. Benchmark functions are provided to testify IDE. Furthermore, IDE is applied to synthetize sum‐difference patterns with a 1 × 16 elements time‐modulated circular array and low sidelobe level (SLL) patterns with an 8 × 12 elements time‐modulated cone array. After optimization, the sideband level (SBL) of the circular array at the first sideband frequency is ?1.00 dB. The SLL and SBL at the first sideband frequency of the cone array are lower than ?30.00 and ?20.00 dB, respectively. Experiment results verify the superior performance of IDE. Moreover, to accelerate the computation speed, graphics processing unit parallel computing technique is introduced into pattern synthesis and the acceleration ratios of more than 23 times can be achieved. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:697–705, 2014.     

Synthesis of antenna arrays with an efficient multiobjective differential evolution algorithm

An efficient multiobjective differential evolution algorithm for array synthesis is proposed in this article. By introducing novel strategies in the generalized differential evolution (GDE3), the proposed algorithm can generate a better converged and distributed Pareto front than the standard GDE3. Five typical benchmark functions are optimized by the proposed improved GDE3 (IGDE) to verify its effectiveness. Furthermore, the proposed algorithm is applied in two‐pattern synthesis problems, including an unequal spaced linear array and a conformal array. The superior performance of the proposed IGDE demonstrates that it is an efficient and competitive algorithm in the function optimization, pattern synthesis, and other electromagnetic problems. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:161–169, 2014.     

A simple planar monopole UWB slot antenna with dual independently and reconfigurable band‐notched characteristics

An extremely simple and compact planar monopole ultrawideband (UWB) slot antenna with dual band‐notched characteristics is proposed. The antenna is composed of a circular radiation patch, a microstrip‐fed line, and a partial ground. By etching an arc‐shaped slot on the radiation patch and a C‐like slot on the feed line, dual notched frequency bands at 3.3–3.7 GHz for WiMAX and 5.15–5.825 GHz for WLAN are achieved. And, the two notched bands can be adjusted independently by varying the length of the slots. Moreover, the band‐notched characteristics can be reconfigurable by shorting the corresponding slots. So, the antenna is capable of operating in one of multiple modes which makes it an excellent candidate for UWB applications. Meanwhile, experimental results indicate that the antenna has an available impendence bandwidth from 2.9 to 11 GHz which covers the UWB frequency band, and nearly omnidirectional patterns, stable gains, small group delay in operating band except rejected bands. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:706–712, 2014.     

重组水蛭素生物学活性检测参考品的制备和标定

目的制备重组水蛭素(Hirudin)生物学活性检测参考品,并标定其生物学活性。方法按照WHO相关规定制备、分装和冻干参考品,经全面检测合格,用TH生色底物法进行体外生物学活性检测。结果外观、无菌试验合格,水分含量为0.8%。经过10次标定,平均生物学活性为12 701 ATU/支,标准差为2 226 ATU/支,变异系数为17.5%。在-20℃、4℃和25℃条件下,生物学活性可以稳定保持9个月。结论该批重组水蛭素各项指标均符合要求,性质稳定,可作为国家参考品,用于重组水蛭素的生物学活性检测。